Bump chart driver versions for CSM 1.11

charts/csi-isilon/Chart.yaml

@@ -1,11 +1,11 @@
 apiVersion: v2
 name: csi-isilon
-version: 2.10.0
-appVersion: "2.10.0"
-kubeVersion: ">= 1.21.0 < 1.30.0"
+version: 2.11.0
+appVersion: "2.11.0"
+kubeVersion: ">= 1.21.0 < 1.31.0"
 #If you are using a complex K8s version like "v1.22.3-mirantis-1", use this kubeVersion check instead
 #WARNING: this version of the check will allow the use of alpha and beta versions, which is NOT SUPPORTED
-#kubeVersion: ">= 1.21.0-0 < 1.30.0-0"
+#kubeVersion: ">= 1.21.0-0 < 1.31.0-0"
 description: |
   PowerScale CSI (Container Storage Interface) driver Kubernetes
   integration. This chart includes everything required to provision via CSI as

charts/csi-isilon/values.yaml

@@ -2,11 +2,11 @@
 ########################
 # version: version of this values file
 # Note: Do not change this value
-version: "v2.10.0"
+version: "v2.11.0"
 
 images:
   # "driver" defines the container image, used for the driver container.
-  driver: dellemc/csi-isilon:v2.10.0
+  driver: dellemc/csi-isilon:v2.11.0
   # CSI sidecars
   attacher: registry.k8s.io/sig-storage/csi-attacher:v4.5.0
   provisioner: registry.k8s.io/sig-storage/csi-provisioner:v4.0.0
@@ -16,9 +16,9 @@ images:
   healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.11.0
 
   # CSM sidecars
-  replication: dellemc/dell-csi-replicator:v1.8.0
-  podmon: dellemc/podmon:v1.9.0
-  authorization: dellemc/csm-authorization-sidecar:v1.10.0
+  replication: dellemc/dell-csi-replicator:v1.9.0
+  podmon: dellemc/podmon:v1.10.0
+  authorization: dellemc/csm-authorization-sidecar:v1.11.0
   metadataretriever: dellemc/csi-metadata-retriever:v1.7.2
   encryption: dellemc/csm-encryption:v0.3.0
 

charts/csi-powermax/Chart.yaml

@@ -1,22 +1,22 @@
 apiVersion: v2
-appVersion: "2.10.0"
+appVersion: "2.11.0"
 name: csi-powermax
-version: 2.10.0
+version: 2.11.0
 description: |
   PowerMax CSI (Container Storage Interface) driver Kubernetes
   integration. This chart includes everything required to provision via CSI as
   well as a PowerMax StorageClass.
 type: application
-kubeVersion: ">= 1.23.0 < 1.30.0"
+kubeVersion: ">= 1.23.0 < 1.31.0"
 # If you are using a complex K8s version like "v1.23.3-mirantis-1", use this kubeVersion check instead
 # WARNING: this version of the check will allow the use of alpha and beta versions, which is NOT SUPPORTED
-# kubeVersion: ">= 1.23.0-0 < 1.30.0-0"
+# kubeVersion: ">= 1.23.0-0 < 1.31.0-0"
 keywords:
 - csi
 - storage
 dependencies:
   - name: csireverseproxy
-    version: 2.9.0
+    version: 2.10.0
     condition: required
 home: https://github.com/dell/csi-powermax
 icon: https://avatars1.githubusercontent.com/u/20958494?s=200&v=4

charts/csi-powermax/charts/csireverseproxy/Chart.yaml

@@ -4,6 +4,6 @@ description: A Helm chart for CSI PowerMax ReverseProxy
 
 type: application
 
-version: 2.9.0
+version: 2.10.0
 
-appVersion: 2.9.0
+appVersion: 2.10.0

charts/csi-powermax/charts/csireverseproxy/values.yaml

@@ -1,4 +1,4 @@
-image: dellemc/csipowermax-reverseproxy:v2.9.0
+image: dellemc/csipowermax-reverseproxy:v2.10.0
 port: 2222
 
 # TLS secret which is used for setting up the proxy HTTPS server

charts/csi-powermax/values.yaml

@@ -48,14 +48,14 @@ global:
 
 # Current version of the driver
 # Don't modify this value as this value will be used by the install script
-version: "v2.10.0"
+version: "v2.11.0"
 
 # "images" defines every container images used for the driver and its sidecars.
 #  To use your own images, or a private registry, change the values here.
 images:
   # "driver" defines the container image, used for the driver container.
-  driver: dellemc/csi-powermax:v2.10.0
-  csireverseproxy: dellemc/csipowermax-reverseproxy:v2.9.0
+  driver: dellemc/csi-powermax:v2.11.0
+  csireverseproxy: dellemc/csipowermax-reverseproxy:v2.10.0
   # CSI sidecars
   attacher: registry.k8s.io/sig-storage/csi-attacher:v4.5.0
   provisioner: registry.k8s.io/sig-storage/csi-provisioner:v4.0.0
@@ -64,12 +64,12 @@ images:
   registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.10.0
   healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.11.0
   # CSM sidecars
-  replication: dellemc/dell-csi-replicator:v1.8.0
-  authorization: dellemc/csm-authorization-sidecar:v1.10.0
-  migration: dellemc/dell-csi-migrator:v1.3.0
+  replication: dellemc/dell-csi-replicator:v1.9.0
+  authorization: dellemc/csm-authorization-sidecar:v1.11.0
+  migration: dellemc/dell-csi-migrator:v1.4.0
   # Node rescan sidecar does a rescan on nodes for identifying new paths
-  # Default value: dellemc/dell-csi-node-rescanner:v1.0.1
-  noderescan: dellemc/dell-csi-node-rescanner:v1.2.0
+  # Default value: dellemc/dell-csi-node-rescanner:v1.3.0
+  noderescan: dellemc/dell-csi-node-rescanner:v1.3.0
 ## K8S/DRIVER ATTRIBUTES
 ########################
 # customDriverName: If enabled, sets the driver name to the

charts/csi-powerstore/Chart.yaml

@@ -14,18 +14,18 @@
 #
 #
 apiVersion: v2
-appVersion: "2.10.0"
+appVersion: "2.11.0"
 name: csi-powerstore
-version: 2.10.0
+version: 2.11.0
 description: |
   PowerStore CSI (Container Storage Interface) driver Kubernetes
   integration. This chart includes everything required to provision via CSI as
   well as a PowerStore StorageClass.
 type: application
-kubeVersion: ">= 1.24.0 < 1.30.0"
+kubeVersion: ">= 1.24.0 < 1.31.0"
 # If you are using a complex K8s version like "v1.24.3-mirantis-1", use this kubeVersion check instead
 # WARNING: this version of the check will allow the use of alpha and beta versions, which is NOT SUPPORTED
-# kubeVersion: ">= 1.24.0-0 < 1.30.0-0"
+# kubeVersion: ">= 1.24.0-0 < 1.31.0-0"
 keywords:
 - csi
 - storage

charts/csi-powerstore/values.yaml

@@ -23,13 +23,13 @@
 driverName: "csi-powerstore.dellemc.com"
 # "version" is used to verify the values file matches driver version
 # Not recommend to change
-version: v2.10.0
+version: v2.11.0
 
 # "images" defines every container images used for the driver and its sidecars.
 #  To use your own images, or a private registry, change the values here.
 images:
   # "driver" defines the container image, used for the driver container.
-  driver: dellemc/csi-powerstore:v2.10.0
+  driver: dellemc/csi-powerstore:v2.11.0
   # CSI sidecars
   attacher: registry.k8s.io/sig-storage/csi-attacher:v4.5.0
   provisioner: registry.k8s.io/sig-storage/csi-provisioner:v4.0.0
@@ -39,9 +39,9 @@ images:
   healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.11.0
 
   # CSM sidecars
-  replication: dellemc/dell-csi-replicator:v1.8.0
-  vgsnapshotter: dellemc/csi-volumegroup-snapshotter:v1.5.0
-  podmon: dellemc/podmon:v1.9.0
+  replication: dellemc/dell-csi-replicator:v1.9.0
+  vgsnapshotter: dellemc/csi-volumegroup-snapshotter:v1.6.0
+  podmon: dellemc/podmon:v1.10.0
   metadataretriever: dellemc/csi-metadata-retriever:v1.7.2
 
 # Specify kubelet config dir path.

charts/csi-unity/Chart.yaml

@@ -1,20 +1,20 @@
 apiVersion: v2
-appVersion: 2.10.0
+appVersion: 2.11.0
 name: csi-unity
-version: 2.10.0
+version: 2.11.0
 description: |
   Unity XT CSI (Container Storage Interface) driver Kubernetes
   integration. This chart includes everything required to provision via CSI as
   well as a Unity XT StorageClass.
 type: application
-kubeVersion: ">= 1.24.0 < 1.30.0"
+kubeVersion: ">= 1.24.0 < 1.31.0"
 # If you are using a complex K8s version like "v1.24.3-mirantis-1", use this kubeVersion check instead
 # WARNING: this version of the check will allow the use of alpha and beta versions, which is NOT SUPPORTED
-# kubeVersion: ">= 1.24.0-0 < 1.30.0-0"
+# kubeVersion: ">= 1.24.0-0 < 1.31.0-0"
 keywords:
 - csi
 - storage
 sources:
 - https://github.com/dell/csi-unity
 maintainers:
-- name: DellEMC
+- name: DellEMC

charts/csi-unity/values.yaml

@@ -4,11 +4,11 @@
 # version: version of this values file
 # Note: Do not change this value
 # Examples : "v2.9.0" , "nightly"
-version: "v2.10.0"
+version: "v2.11.0"
 
 images:
   # "driver" defines the container image, used for the driver container.
-  driver: dellemc/csi-unity:v2.10.0
+  driver: dellemc/csi-unity:v2.11.0
   # CSI sidecars
   attacher: registry.k8s.io/sig-storage/csi-attacher:v4.5.0
   provisioner: registry.k8s.io/sig-storage/csi-provisioner:v4.0.0
@@ -18,7 +18,7 @@ images:
   healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.11.0
 
   # CSM sidecars
-  podmon: dellemc/podmon:v1.9.0
+  podmon: dellemc/podmon:v1.10.0
 
 # LogLevel is used to set the logging level of the driver.
 # Allowed values: "error", "warn"/"warning", "info", "debug"

charts/csi-vxflexos/Chart.yaml

@@ -1,15 +1,15 @@
 apiVersion: v2
-appVersion: "2.10.0"
+appVersion: "2.11.0"
 name: csi-vxflexos
-version: "2.10.1"
+version: "2.11.0"
 description: |
   VxFlex OS CSI (Container Storage Interface) driver Kubernetes
   integration. This chart includes everything required to provision via CSI as
   well as a VxFlex OS StorageClass.
-kubeVersion: ">= 1.21.0 < 1.30.0"
+kubeVersion: ">= 1.21.0 < 1.31.0"
 # If you are using a complex K8s version like "v1.21.3-mirantis-1", use this kubeVersion check instead
 # WARNING: this version of the check will allow the use of alpha and beta versions, which is NOT SUPPORTED
-# kubeVersion: ">= 1.21.0-0 < 1.30.0-0"
+# kubeVersion: ">= 1.21.0-0 < 1.31.0-0"
 keywords:
 - csi
 - storage

charts/csi-vxflexos/values.yaml

@@ -3,14 +3,14 @@
 
 # "version" is used to verify the values file matches driver version
 # Not recommend to change
-version: v2.10.0
+version: v2.11.0
 
 # "images" defines every container images used for the driver and its sidecars.
 #  To use your own images, or a private registry, change the values here.
 
 images:
   # "driver" defines the container image, used for the driver container.
-  driver: dellemc/csi-vxflexos:v2.10.0
+  driver: dellemc/csi-vxflexos:v2.11.0
   # "powerflexSdc" defines the SDC image for init container.
   powerflexSdc: dellemc/sdc:4.5.1
   # CSI sidecars
@@ -21,10 +21,10 @@ images:
   registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.10.0
   healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.11.0
   # CSM sidecars
-  replication: dellemc/dell-csi-replicator:v1.8.0
-  vgsnapshotter: dellemc/csi-volumegroup-snapshotter:v1.5.0
-  podmon: dellemc/podmon:v1.9.0
-  authorization: dellemc/csm-authorization-sidecar:v1.10.0
+  replication: dellemc/dell-csi-replicator:v1.9.0
+  vgsnapshotter: dellemc/csi-volumegroup-snapshotter:v1.6.0
+  podmon: dellemc/podmon:v1.10.0
+  authorization: dellemc/csm-authorization-sidecar:v1.11.0
 
 # Represents number of certificate secrets, which user is going to create for ssl authentication. (vxflexos-cert-0..vxflexos-cert-n)
 # If user does not use certificate, set to 0

charts/csm-application-mobility/Chart.yaml

@@ -16,7 +16,7 @@ appVersion: "0.3.0"
 
 dependencies:
 - name: cert-manager
-  version: 1.8.2
+  version: 1.11.0
   repository: https://charts.jetstack.io
   condition: cert-manager.enabled
 - name: velero

charts/csm-replication/Chart.yaml

@@ -3,5 +3,5 @@ name: csm-replication
 type: application
 description: |
   CSM for Replication helm charts
-version: 1.8.0
-appVersion: "1.8.0"
+version: 1.9.0
+appVersion: "1.9.0"

charts/csm-replication/values.yaml

@@ -5,7 +5,7 @@ replicas: 1
 
 # image: Defines controller image. This shouldn't be changed
 # Allowed values: string
-image: dellemc/dell-replication-controller:v1.8.0
+image: dellemc/dell-replication-controller:v1.9.0
 
 # logLevel: Defines initial log level for controller. This can be changed in runtime
 # Allowed values: "debug", "info", "warn", "error", "panic"

charts/karavi-observability/crds/cert-manager.crds.yaml

@@ -22,7 +22,7 @@ metadata:
     app.kubernetes.io/name: 'cert-manager'
     app.kubernetes.io/instance: 'cert-manager'
     # Generated labels
-    app.kubernetes.io/version: "v1.10.0"
+    app.kubernetes.io/version: "v1.11.0"
 spec:
   group: cert-manager.io
   names:
@@ -1313,7 +1313,7 @@ metadata:
     app.kubernetes.io/name: 'cert-manager'
     app.kubernetes.io/instance: 'cert-manager'
     # Generated labels
-    app.kubernetes.io/version: "v1.10.0"
+    app.kubernetes.io/version: "v1.11.0"
 spec:
   group: acme.cert-manager.io
   names:
@@ -2377,7 +2377,7 @@ metadata:
     app.kubernetes.io/name: 'cert-manager'
     app.kubernetes.io/instance: 'cert-manager'
     # Generated labels
-    app.kubernetes.io/version: "v1.10.0"
+    app.kubernetes.io/version: "v1.11.0"
 spec:
   group: cert-manager.io
   names:
@@ -2577,7 +2577,7 @@ metadata:
     app.kubernetes.io/name: 'cert-manager'
     app.kubernetes.io/instance: 'cert-manager'
     # Generated labels
-    app.kubernetes.io/version: "v1.10.0"
+    app.kubernetes.io/version: "v1.11.0"
 spec:
   group: cert-manager.io
   names:
@@ -3868,7 +3868,7 @@ metadata:
     app.kubernetes.io/name: 'cert-manager'
     app.kubernetes.io/instance: 'cert-manager'
     # Generated labels
-    app.kubernetes.io/version: "v1.10.0"
+    app.kubernetes.io/version: "v1.11.0"
 spec:
   group: cert-manager.io
   names:
@@ -4241,7 +4241,7 @@ metadata:
     app.kubernetes.io/name: 'cert-manager'
     app.kubernetes.io/instance: 'cert-manager'
     # Generated labels
-    app.kubernetes.io/version: "v1.10.0"
+    app.kubernetes.io/version: "v1.11.0"
 spec:
   group: acme.cert-manager.io
   names: