PSoC Bootloader Host Application

Usage of bootloader-tool

Print Help

root@dhsom:~# psoc-bootloader-tool

psoc-bootloader-tool [-x XRES-GPIO | -n | -l LABEL-XRES-GPIO] [-d DEVICE] [-s SPEED] [-i ID] [-r REV] file.cyacd
        -n               - do not use XRES-GPIO
        XRES-GPIO        - gpio in the form for export in /sys/class/gpio
        LABEL-XRES-GPIO  - gpio in the form label for libgpiod
        DEVICE           - the full pathname of the SPI/I2C/UART device, e.g /dev/spidev0.2
        SPEED            - speed in bps.
        ID               - silicon id, 32-bit HEX.
        REV              - silicon revision, 32-bit HEX.

Example i.mx6qdls: update PSoC 4 from DHCOM i.mx6qdls through SPI1 in baseboard e.g. DRC02

root@dhsom:~# psoc-bootloader-tool -x 4 -d /dev/spidev0.2 Design-570-100.cyacd

Example i.mx6ULL: update PSoC 4 from DHCOM i.mx6ULL through SPI1 in baseboard e.g. DRC02, InfoWin+NG, ...

root@dhsom:~# psoc-bootloader-tool -x 129 -d /dev/spidev0.0 Design-598-100.cyacd

Example STM32MP1: update PSoC 4 from DHCOM STM32MP1 through SPI1 in baseboard e.g. DRC02

root@dhsom:~# psoc-bootloader-tool -l B -d /dev/spidev0.0 Design-570-100.cyacd

Check Device-Tree GPIO Labels if that fails.