MMM-SystemInfo

Magic Mirror Module that displays a lot of useful info as:

• CPU load
• RAM usage
• Disk usage
• CPU temperature
• Volume
• Internet status
• Private ip
• Wifi network to share

Note that if you have special characters in your password, the QR code will not work. This is because I haven't done the work required to escape the special characters properly.

Disclaimer:

• The WifiPassword is mostly this module, I just add it to this module.
• Internet status is "bassed" on this module

Screenshot

Full example

Installation

1. In your terminal, change to your Magic Mirror module directory

cd ~/MagicMirror/modules

2. Clone this repository git clone https://github.com/dientuki/MMM-SystemInfo.git

3. Make changes to your config.js file.

How to use this module

As with other MM modules, add this array to the config/config.js file

modules:[
  {
    module: 'MMM-SystemInfo',
    position: "bottom_right",
      config: {
        //See 'Configuration options' for more information.
      }
  },
]

Configuration Options

Wifi

Option	Description	Default
qrSize	The width and height of QRCode in pixels. Type: int	125
authType	Your authentication type. Options: WPA WEP NONE	WPA
network	Your network SSID. Type: string	REQUIRED
password	Your network Password. Type: string	REQUIRED
hiddenId	Whether your SSID is hidden. Type: boolean	false
wifiDataCompact	How to display your netkwork info, full (several lines) or compact (one line, just the data). Type: boolean	false
showNetwork	Show network SSID. Type: boolean	true
showPassword	Show your network password. Type: boolean	true
showAuthType	Show your authentication type. Type: boolean	true

Stats

There are several ways to get the stats, it may vary according to your SO or custom instalattion... so, here is the catch. Just add the command thats works for you buddy. I put as example the commands that im using on my ubunut linux on my old pc, but check every command in your enviroment. Addionally, you can set showSTAT to false and omit the stat to show, it is usefull is any value is wrong and you want to avoid dealing with that stat

Option	Description	Default
showCpuUsage	Show your CPU usage. Type: boolean	true
cpuUsageCommand	Command to get the cpu usage. Example:awk '/^%Cpu/{gsub(/,/, ".", $8); print 100 - $8}' <(top -b -n 1) Type: string

Design

Option	Description	Default
layout	The order of the QR and table, usefull is you want to use it at right or left corners ltr: QR box | Stats rtl: Stats | QR box Options: ltr rtl	ltr
connectedColor	Color to use as ok status. Type: string	#008000
disconnectedColor	Color to use as fail status. Type: string	#ff0000
wifiDataCompact	How to display your netkwork info, full (several lines) or compact (one line, just the data). Type: boolean	false
units	Use either 'metric' or 'imperial' to display the temperature. Options: metric imperial	Inherit from config.js
updateInterval	How often does the content needs to be fetched? (Milliseconds) Type: int	2000
decimal	How much decimal numbers want to show Type: int	1