keyboard based on the ch552t Chip.
Runs on FAK firmware. I named it the Ch55p34 because it's "Ch55p." It is hot-swappable.
I forgot to add mounting holes, and because of this, I had to find a way to mount the plate to the case.
You can use it without a case, or you can use the 3d printable case and plate that I designed.
Four m2x10mm screws hold the plate in place. from the side.
An unintended side effect is that it is about 7mm thinner than any other keyboard I've made with a case.
I may do this for the rest of my keyboards!