You can find the most recent version at the mw-mdma-fw GitLab project page. This repository will be kept as is, and will not be updated anymore.
Firmare for the MegaWiFi Programmer. Firmware produced by these sources must be programmed to the microcontroller inside a MegaWiFi Programmer for it to work properly. It is prepared to be used in conjunction with mw-mdma-bl bootloader (a LUFA DFU based bootloader) to be able to boot from the bootloader, and enter bootloader mode for firmware download.
You will need avr-gcc, avr-binutils and avr-libc to be able to build the sources. You will also need a recent LUFA library installation. Edit makefile file, and change the LUFA_PATH definition to match the path where you have installed LUFA library:
LUFA_PATH ?= $(HOME)/src/avr/lufa/lufa-latest/LUFA
Then cd to the path where the sources of this repository are located and simply run:
$ make
To burn the new firmware you can use your favorite tool. If the microcontroller has a DFU bootloader burned, you can enter DFU mode (e.g. keeping the pushbutton on the programmer pressed while plugging the USB cable) and burn the firmware by running:
$ make dfu
Once flashed, you can use mw-mdma-cli tool to to talk to the MegaWiFi Programmer.
This program has been written by doragasu. It uses the wonderful LUFA library by Dean Camera.
Contributions are welcome. If you find a bug please open an issue, and if you have implemented a cool feature/improvement, please send a pull request.
This program is provided with NO WARRANTY, under the GPLv3 license.