DPT-Module V1 toolchain, based on the LEDE Linux distribution.

Jumpstart

To get an firmware image for your DPT-Module working you need to do the following:

1. Clone the repository to your build host git clone git@github.com:dptechnics/DPT-Board-OS2.git
2. Go to the DPT-Board-OS2 directory
3. Execute the command make menuconfig and select the following options: ⋅⋅* Target System: Atheros AR7xxx/AR9xxx ⋅⋅* Subtarget: Generic ⋅⋅* Target Profile: DPTechnics DPT-Module V1
4. Save by double pressing the Escape key and choosing 'Yes' to save.
5. Build the toolchain and OS by typing make. When you have multiple cores available you can type make -jx where x is the number of cores in your pc plus one.
6. When the OS is compiled you can find an image in bin/targets/ar71xx/generic/lede-ar71xx-generic-dpt-module-v1-squashfs-sysupgrade.bin
7. Copy the file to the /tmp directory on your DPT-Module
8. Run sysupgrade -n -v /tmp/lede-ar71xx-generic-dpt-module-v1-squashfs-sysupgrade.bin to upgrade your DPT-Module. Be aware that all settings and files will be lost.

Login to your DPT-Module/DPT-Board

The DPT-Board OS has a default root account:

username: root password: dptechnics

Make sure that you change the root password to one of your own to make the board secure. You can do this by logging in through SSH and issuing the passwd command.

Requirements

You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system.

Extra packages

Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/.

Support

Yu can contact DPTechnics support the DPTechnics website: https://www.dptechnics.com. Alternatively you can post bugs via the github issue tracker.