Skip to content

Templates for Chalmers MOP for people who want to use Visual Studio Code instead of CodeLite

Notifications You must be signed in to change notification settings

dtekcth/mop_templates

 
 

Repository files navigation

MD407 Templates for use outside of CodeLite

VS Code users:

The extension is now available on the marketplace. Just search for MD407. Please use that version over github releases.

Install the extension from the releases page, along with SimServer from gbgmv.se.

You install extensions in Visual Studio Code by hitting Ctrl + Shift + P and typing Install from VSIX.

Linux users need to add their user to the dialout group or equivalent and reboot (really reboot, for once logging out and in again is not enough). The equivalent on Arch is uucp.

Open VSC in an empty folder and hit Ctrl + Shift + P and type Create new project from Basic template. Then enter your project name.

You can now run the default program in SimServer by opening SimServer, then going to the debugging tab, selecting your project and hitting the green arrow.

You can also run the default program on Hardware by going to the MD407 Config tab (added by the extension), selecting the port under the ports section and then hitting Interactive, Compile and Load in order and then typing go in the now opened terminal. Remember to reset the MD407 between runs. MacOS requires resets between load and go.

Recommended extensions

  • clangd by LLVM
  • Clang-Format by xaver

Required packages for Linux users (bundled for Windows/Mac)

Debian based systems

  • gdb-multiarch
  • make
  • gcc-arm-none-eabi
  • libnewlib-arm-none-eabi
  • libnewlib-nano-arm-none-eabi

Arch based systems

  • arm-none-eabi-gdb (needs to be aliased to gdb-multiarch or have .vscode/launch.json changed)
  • arm-none-eabi-gcc
  • arm-none-eabi-newlib

VIM / NeoVIM / CLion / Emacs / etc.

Copy the Basic folder into your project. Run make build to build your project. Do simserver debugging directly in gdb. TUI mode is recommended (tui enable), though it's only available on Linux. The gdbinit file is provided to automatically run the commands to connect to SimServer.

To communicate with the hardware, the md407_win_rs program is provided. Either download it from the releases page or compile it yourself and install with cargo-install like any other Rust program. On linux you either need to run it as root or add yourself to the dialout group.

External Links

SimServer and Eterm8

GCC 10 for Windows/MacOS

Note that while GCC 11 is out, there are issues with it

Make for Windows

About

Templates for Chalmers MOP for people who want to use Visual Studio Code instead of CodeLite

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Nix 87.9%
  • TypeScript 6.0%
  • C 2.7%
  • Makefile 2.1%
  • Rust 1.1%
  • GDB 0.1%
  • Assembly 0.1%