FROM THE ORIGINAL PROJECT (https://github.com/bolwire/OGX360I-4CH):

This project builds on the original OGX360 by Ryzee119: https://github.com/Ryzee119/ogx360/

The information provided in this repo is for informational purposes only.

The ATMEGA32U4 chips will need to be programmed with the arduino bootloader before they are put on the PCB. One option may be to remove the chips from an arduino and transplant them.

Please respect the license files found within this project. What we do, and the joy we gain from that would not be possible without those who shared the information with us to start with. Please respect and honor that by doing the same with any works derived from this or other projects linked to in this repo.

Also my spelling sucks, so I apologize for any type-ohs that exist.

As mentioned in the quote, this is a derivative of the work of Ryzee119. It allows more modern (both wireless and wired) controllers to be used with the original xbox. This derivative is an internal mod that is plug and play. It allows for 4 controllers to be used at the same time. While the mod is active (external switch to activate/deactivate mod), the front ports on the xbox are inactive. When the switch is turned off, the mod is inactive and the front ports are active. For a list of compatible controllers, please see Ryzee119's github linked above. I did not create this project. I only recreated it on my own and updating documentation as I believe it to be. I provide no warranties of my work (I could be wrong) and take no responsibility for anything you may do with this information. As quoted above, this is for informational purposes only. With the information I posted here... I have created fully working boards.