esp8266-wireless-switcher

A custom firmware to transform the ESP8266 wifi module into a wifi http based switcher

GPIO02 is used as an output pin. You can connect a led or a relay and controll it by a button added to GPIO00. Also the firmware provides a web interface and a simple API that will controll the GPIO02 state.

API DOC

Set GPIO02 output to active.

POST http://{ipAddress}/gpio02.cgi
Request Body: value=1

Set GPIO02 output to inactive.

POST http://{ipAddress}/gpio02.cgi
Request Body: value=0

Get GPIO02 state as a string (on|off)

GET http://{ipAddress}/api/gpio02.tpl

Get device info in JSON format.

GET http://{ipAddress}/api/device-info.tpl

Connect your device to your home network

Search for a network called "ESPxxxxx" and connect. Now you can access the interface using this: http://192.168.4.1

Use http://192.168.4.1/wifi and connect the wifi module to your home network.

You can find the IP of module inside your home network on the main page: http://192.168.4.1

Now you have the IP and you can connect to your home network back and access the module using that IP