Skip to content

Production

Jump to bottom
Van-Duyet Le edited this page Mar 21, 2016 · 9 revisions

How to deploy Saveto.co in production server.

  1. Install nginx, pm2

    sudo apt-get install -y nginx
sudo npm i -g pm2

  2. Start PM2 instance.

    pm2 start app.js -i 2 -n 'saveto'

    With: * -i 2: start Saveto with 2 instances cluster mode. When some instance down, web service still available in another one. Make your website has no downtime.

    • -n 'saveto' instance name.

    You will see:

    [PM2] Starting app.js in cluster_mode (2 instances)
[PM2] Done.
┌──────────┬────┬─────────┬──────┬────────┬─────────┬────────┬─────────────┬──────────┐
│ App name │ id │ mode    │ pid  │ status │ restart │ uptime │ memory      │ watching │
├──────────┼────┼─────────┼──────┼────────┼─────────┼────────┼─────────────┼──────────┤
│ quick    │ 0  │ cluster │ 8362 │ online │ 0       │ 0s     │ 18.047 MB   │ disabled │
│ quick    │ 1  │ cluster │ 8371 │ online │ 0       │ 0s     │ 15.105 MB   │ disabled │
└──────────┴────┴─────────┴──────┴────────┴─────────┴────────┴─────────────┴──────────┘

  3. Config Nginx Open nginx config file /etc/nginx/sites-enabled/default

    sudo nano /etc/nginx/sites-enabled/default

    Update the config file with:

    server {
        listen 80 default_server;[PM2][Module] Module downloaded

[PM2] Process launched [PM2][Module] Module successfully installed and launched [PM2][Module] : To configure module do [PM2][Module] : $ pm2 conf ┌──────────┬────┬─────────┬──────┬────────┬─────────┬────────┬──────────────┬──────────┐ │ App name │ id │ mode │ pid │ status │ restart │ uptime │ memory │ watching │ ├──────────┼────┼─────────┼──────┼────────┼─────────┼────────┼──────────────┼──────────┤ │ quick │ 0 │ cluster │ 8362 │ online │ 0 │ 12m │ 110.535 MB │ disabled │ │ quick │ 1 │ cluster │ 8371 │ online │ 0 │ 12m │ 111.191 MB │ disabled │ └──────────┴────┴─────────┴──────┴────────┴─────────┴────────┴──────────────┴──────────┘ Module activated ┌───────────────┬─────────┬────────────┬────────┬─────────┬─────┬─────────────┐ │ Module │ version │ target PID │ status │ restart │ cpu │ memory │ ├───────────────┼─────────┼────────────┼────────┼─────────┼─────┼─────────────┤ │ pm2-auto-pull │ N/A │ 9360 │ online │ 0 │ 25% │ 12.586 MB │ └───────────────┴─────────┴────────────┴────────┴─────────┴─────┴─────────────┘ Use pm2 show <id|name> to get more details about an app

       listen [::]:80 default_server ipv6only=on;

       # Make site accessible from http://localhost/
       # server_name localhost;

       location / {
               proxy_set_header HOST $host;
               proxy_set_header X-Forwarded-Proto $scheme;


               proxy_pass http://localhost:6969;
               proxy_http_version 1.1;
               proxy_set_header Upgrade $http_upgrade;
               proxy_set_header Connection 'upgrade';
               proxy_cache_bypass $http_upgrade;


              proxy_set_header   X-Real-IP             $remote_addr;
              proxy_set_header   X-Forwarded-For $proxy_add_x_forwarded_for;

       }

}

...


Save file in nano with `Ctrl + C` and press `Y`

Restart nginx:
```sh
sudo service nginx restart
  1. Fire: http://saveto.co

Bonus

PM2 auto pull from git when it's change.

pm2 install pm2-auto-pull
[PM2][Module] Module downloaded
[PM2] Process launched
[PM2][Module] Module successfully installed and launched
[PM2][Module] : To configure module do
[PM2][Module] : $ pm2 conf <key> <value>
┌──────────┬────┬─────────┬──────┬────────┬─────────┬────────┬──────────────┬──────────┐
│ App name │ id │ mode    │ pid  │ status │ restart │ uptime │ memory       │ watching │
├──────────┼────┼─────────┼──────┼────────┼─────────┼────────┼──────────────┼──────────┤
│ quick    │ 0  │ cluster │ 8362 │ online │ 0       │ 12m    │ 110.535 MB   │ disabled │
│ quick    │ 1  │ cluster │ 8371 │ online │ 0       │ 12m    │ 111.191 MB   │ disabled │
└──────────┴────┴─────────┴──────┴────────┴─────────┴────────┴──────────────┴──────────┘
 Module activated
┌───────────────┬─────────┬────────────┬────────┬─────────┬─────┬─────────────┐
│ Module        │ version │ target PID │ status │ restart │ cpu │ memory      │
├───────────────┼─────────┼────────────┼────────┼─────────┼─────┼─────────────┤
│ pm2-auto-pull │ N/A     │ 9360       │ online │ 0       │ 25% │ 12.586 MB   │
└───────────────┴─────────┴────────────┴────────┴─────────┴─────┴─────────────┘
 Use `pm2 show <id|name>` to get more details about an app

Dropbox auto backup database and source code by cronjob

See https://github.com/duyetdev/server-dropbox-backup-schedule

PM2 auto resurrect process at startup.

pm2 startup [platform] # [platform] = ubuntu, centos, redhat, gentoo, systemd, darwin, amazon
Clone this wiki locally