Arduino library for using with the uBlox nbIOT modules.
The firmware version of the module should be >= 06.57,A03.02.
Please check http://support.sodaq.com/sodaq-one/firmware-upgrade/ for the latest firmware.
Quick example:
#include "Sodaq_nbIOT.h"
#include <Sodaq_wdt.h>
#ifdef ARDUINO_SODAQ_EXPLORER
#define MODEM_ON_OFF_PIN 7
#define MODEM_STREAM Serial
#else
#error "You need to declare the modem on/off pin and stream for your particular board!"
#endif
#define DEBUG_STREAM SerialUSB
#define DEBUG_STREAM_BAUD 115200
const char* apn = "oceanconnect.t-mobile.nl";
const char* cdp = "172.16.14.22";
const char* forceOperator = "20416"; // optional - depends on SIM / network
Sodaq_nbIOT nbiot;
void setup()
{
DEBUG_STREAM.begin(DEBUG_STREAM_BAUD);
MODEM_STREAM.begin(nbiot.getDefaultBaudrate());
nbiot.init(MODEM_STREAM, MODEM_ON_OFF_PIN);
nbiot.setDiag(DEBUG_STREAM);
if (nbiot.connect(apn, cdp, forceOperator)) {
DEBUG_STREAM.println("Connected succesfully!");
}
else {
DEBUG_STREAM.println("Failed to connect!");
return;
}
const char* message = "Hello World!";
if (!nbiot.sendMessage(message)) {
DEBUG_STREAM.println("Could not queue message!");
}
else {
DEBUG_STREAM.println("Message queued for transmission!");
}
}
void loop()
{
}| Method | Description |
|---|---|
| getDefaultBaudRate () | Returns the correct baudrate for the serial port that connects to the device. |
| setDiag (Stream& stream) | Sets the optional "Diagnostics and Debug" stream. |
| init(Stream& stream, int8_t onoffPin) | // Initializes the modem instance. Sets the modem stream and the on-off power pins. |
| overrideNconfigParam(const char* param, bool value) | Override a default config parameter, has to be called before connect(). Returns false if the parameter name was not found. Possible values for param are: AUTOCONNECT, CR_0354_0338_SCRAMBLING, CR_0859_SI_AVOID, COMBINE_ATTACH, CELL_RESELECTION and ENABLE_BIP. |
| isAlive() | Returns true if the modem replies to "AT" commands without timing out. |
| connect(const char* apn, const char* cdp, const char* forceOperator = 0, uint8_t band = 8) | Turns on and initializes the modem, then connects to the network and activates the data connection. Returns true when successful. |
| disconnect() | Disconnects the modem from the network. Returns true when successful. |
| isConnected() | Returns true if the modem is connected to the network and has an activated data connection. |
| sendMessage(const uint8_t* buffer, size_t size) | Sends the given buffer, up to "size" bytes long. Returns true when the message is successfully queued for transmission on the modem. |
| sendMessage(const char* str) | Sends the given null-terminated c-string. Returns true when the message is successfully queued for transmission on the modem. |
| sendMessage(String str) | Sends the given String. Returns true when the message is successfully queued for transmission on the modem. |
| getSentMessagesCount(SentMessageStatus filter) | Returns the number of messages that are either pending (filter == Pending) or failed to be transmitted (filter == Error) on the modem. |
| createSocket(uint16_t localPort = 0) | Create a UDP socket for the specified local port, returns the socket handle. |
| closeSocket(uint8_t socket) | Close a UDP socket by handle, returns true if successful. |
| socketSend(uint8_t socket, const char* remoteIP, const uint16_t remotePort, char* buffer, size_t size) | Send a udp payload buffer to a specified remote IP and port, through a specific socket. |
| socketReceiveHex(char* buffer, size_t length, SaraN2UDPPacketMetadata* p = NULL) | Receive pending socket data as hex data in a passed buffer. Optionally pass a helper object to receive metadata about the origin of the socket data. |
| socketReceiveBytes(uint8_t* buffer, size_t length, SaraN2UDPPacketMetadata* p = NULL) | Receive pending socket data as binary data in a passed buffer. Optionally pass a helper object to receive metadata about the origin of the socket data. |
| getPendingUDPBytes() | Return the number of pending bytes, gets updated by calling socketReceiveXXX. |
| hasPendingUDPBytes() | Helper function returning if getPendingUDPBytes() > 0. |
| ping(char* ip) | Ping a specific IP address. |
| waitForUDPResponse(uint32_t timeoutMS = DEFAULT_UDP_TIMOUT_MS) | Calls isAlive() until the passed timeout, or until a UDP packet has been received on any socket. |
- Fork it!
- Create your feature branch:
git checkout -b my-new-feature - Commit your changes:
git commit -am 'Add some feature' - Push to the branch:
git push origin my-new-feature - Submit a pull request
Copyright (c) 2015-2016 Sodaq. All rights reserved.
This file is part of Sodaq_nbIOT.
Sodaq_nbIOT is free software: you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation, either version 3 of the License, or(at your option) any later version.
Sodaq_nbIOT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with Sodaq_nbIOT. If not, see http://www.gnu.org/licenses/.