Remove deprecated spool queue from Beats

CHANGELOG-developer.next.asciidoc

@@ -58,6 +58,7 @@ The list below covers the major changes between 7.0.0-rc2 and master only.
 - Removed the `common.Float` type. {issue}28279[28279] {pull}28280[28280] {pull}28376[28376]
 - Removed Beat generators. {pull}28816[28816]
 - libbeat.logp package forces ECS compliant logs. Logs are JSON formatted. Options to enable ECS/JSON have been removed. {issue}15544[15544] {pull}28573[28573]
+- Removed deprecated disk spool from Beats. Use disk queue instead. {pull}28869[28869]
 
 ==== Bugfixes
 

auditbeat/auditbeat.reference.yml

@@ -197,66 +197,6 @@ auditbeat.modules:
     # length of its retry interval each time, up to this maximum.
     #max_retry_interval: 30s
 
-  # The spool queue will store events in a local spool file, before
-  # forwarding the events to the outputs.
-  # Note: the spool queue is deprecated and will be removed in the future.
-  # Use the disk queue instead.
-  #
-  # The spool file is a circular buffer, which blocks once the file/buffer is full.
-  # Events are put into a write buffer and flushed once the write buffer
-  # is full or the flush_timeout is triggered.
-  # Once ACKed by the output, events are removed immediately from the queue,
-  # making space for new events to be persisted.
-  #spool:
-    # The file namespace configures the file path and the file creation settings.
-    # Once the file exists, the `size`, `page_size` and `prealloc` settings
-    # will have no more effect.
-    #file:
-      # Location of spool file. The default value is ${path.data}/spool.dat.
-      #path: "${path.data}/spool.dat"
-
-      # Configure file permissions if file is created. The default value is 0600.
-      #permissions: 0600
-
-      # File size hint. The spool blocks, once this limit is reached. The default value is 100 MiB.
-      #size: 100MiB
-
-      # The files page size. A file is split into multiple pages of the same size. The default value is 4KiB.
-      #page_size: 4KiB
-
-      # If prealloc is set, the required space for the file is reserved using
-      # truncate. The default value is true.
-      #prealloc: true
-
-    # Spool writer settings
-    # Events are serialized into a write buffer. The write buffer is flushed if:
-    # - The buffer limit has been reached.
-    # - The configured limit of buffered events is reached.
-    # - The flush timeout is triggered.
-    #write:
-      # Sets the write buffer size.
-      #buffer_size: 1MiB
-
-      # Maximum duration after which events are flushed if the write buffer
-      # is not full yet. The default value is 1s.
-      #flush.timeout: 1s
-
-      # Number of maximum buffered events. The write buffer is flushed once the
-      # limit is reached.
-      #flush.events: 16384
-
-      # Configure the on-disk event encoding. The encoding can be changed
-      # between restarts.
-      # Valid encodings are: json, ubjson, and cbor.
-      #codec: cbor
-    #read:
-      # Reader flush timeout, waiting for more events to become available, so
-      # to fill a complete batch as required by the outputs.
-      # If flush_timeout is 0, all available events are forwarded to the
-      # outputs immediately.
-      # The default value is 0s.
-      #flush.timeout: 0s
-
 # Sets the maximum number of CPUs that can be executing simultaneously. The
 # default is the number of logical CPUs available in the system.
 #max_procs:

filebeat/filebeat.reference.yml

@@ -1111,66 +1111,6 @@ filebeat.inputs:
     # length of its retry interval each time, up to this maximum.
     #max_retry_interval: 30s
 
-  # The spool queue will store events in a local spool file, before
-  # forwarding the events to the outputs.
-  # Note: the spool queue is deprecated and will be removed in the future.
-  # Use the disk queue instead.
-  #
-  # The spool file is a circular buffer, which blocks once the file/buffer is full.
-  # Events are put into a write buffer and flushed once the write buffer
-  # is full or the flush_timeout is triggered.
-  # Once ACKed by the output, events are removed immediately from the queue,
-  # making space for new events to be persisted.
-  #spool:
-    # The file namespace configures the file path and the file creation settings.
-    # Once the file exists, the `size`, `page_size` and `prealloc` settings
-    # will have no more effect.
-    #file:
-      # Location of spool file. The default value is ${path.data}/spool.dat.
-      #path: "${path.data}/spool.dat"
-
-      # Configure file permissions if file is created. The default value is 0600.
-      #permissions: 0600
-
-      # File size hint. The spool blocks, once this limit is reached. The default value is 100 MiB.
-      #size: 100MiB
-
-      # The files page size. A file is split into multiple pages of the same size. The default value is 4KiB.
-      #page_size: 4KiB
-
-      # If prealloc is set, the required space for the file is reserved using
-      # truncate. The default value is true.
-      #prealloc: true
-
-    # Spool writer settings
-    # Events are serialized into a write buffer. The write buffer is flushed if:
-    # - The buffer limit has been reached.
-    # - The configured limit of buffered events is reached.
-    # - The flush timeout is triggered.
-    #write:
-      # Sets the write buffer size.
-      #buffer_size: 1MiB
-
-      # Maximum duration after which events are flushed if the write buffer
-      # is not full yet. The default value is 1s.
-      #flush.timeout: 1s
-
-      # Number of maximum buffered events. The write buffer is flushed once the
-      # limit is reached.
-      #flush.events: 16384
-
-      # Configure the on-disk event encoding. The encoding can be changed
-      # between restarts.
-      # Valid encodings are: json, ubjson, and cbor.
-      #codec: cbor
-    #read:
-      # Reader flush timeout, waiting for more events to become available, so
-      # to fill a complete batch as required by the outputs.
-      # If flush_timeout is 0, all available events are forwarded to the
-      # outputs immediately.
-      # The default value is 0s.
-      #flush.timeout: 0s
-
 # Sets the maximum number of CPUs that can be executing simultaneously. The
 # default is the number of logical CPUs available in the system.
 #max_procs:

go.mod

@@ -72,7 +72,6 @@ require (
 	github.com/elastic/go-seccomp-bpf v1.2.0
 	github.com/elastic/go-structform v0.0.9
 	github.com/elastic/go-sysinfo v1.7.1
-	github.com/elastic/go-txfile v0.0.8
 	github.com/elastic/go-ucfg v0.8.3
 	github.com/elastic/go-windows v1.0.1
 	github.com/elastic/gosigar v0.14.2
@@ -151,7 +150,6 @@ require (
 	github.com/tsg/go-daemon v0.0.0-20200207173439-e704b93fd89b
 	github.com/tsg/gopacket v0.0.0-20200626092518-2ab8e397a786
 	github.com/ugorji/go/codec v1.1.8
-	github.com/urso/magetools v0.0.0-20200125210132-c2e338f92f3a // indirect
 	github.com/urso/sderr v0.0.0-20210525210834-52b04e8f5c71
 	github.com/vmware/govmomi v0.0.0-20170802214208-2cad15190b41
 	github.com/xdg/scram v1.0.3
@@ -268,7 +266,6 @@ require (
 	github.com/sirupsen/logrus v1.8.1 // indirect
 	github.com/stretchr/objx v0.2.0 // indirect
 	github.com/urso/diag v0.0.0-20200210123136-21b3cc8eb797 // indirect
-	github.com/urso/go-bin v0.0.0-20180220135811-781c575c9f0e // indirect
 	github.com/xdg/stringprep v1.0.3 // indirect
 	go.elastic.co/fastjson v1.1.0 // indirect
 	go.opencensus.io v0.23.0 // indirect

go.sum

@@ -529,8 +529,6 @@ github.com/elastic/go-structform v0.0.9/go.mod h1:CZWf9aIRYY5SuKSmOhtXScE5uQiLZN
 github.com/elastic/go-sysinfo v1.1.1/go.mod h1:i1ZYdU10oLNfRzq4vq62BEwD2fH8KaWh6eh0ikPT9F0=
 github.com/elastic/go-sysinfo v1.7.1 h1:Wx4DSARcKLllpKT2TnFVdSUJOsybqMYCNQZq1/wO+s0=
 github.com/elastic/go-sysinfo v1.7.1/go.mod h1:i1ZYdU10oLNfRzq4vq62BEwD2fH8KaWh6eh0ikPT9F0=
-github.com/elastic/go-txfile v0.0.8 h1:hqFMmLM+UCDMJeSyuCWe8YwS+HtoX7F+cz5fhPYRTn4=
-github.com/elastic/go-txfile v0.0.8/go.mod h1:H0nCoFae0a4ga57apgxFsgmRjevNCsEaT6g56JoeKAE=
 github.com/elastic/go-ucfg v0.7.0/go.mod h1:iaiY0NBIYeasNgycLyTvhJftQlQEUO2hpF+FX0JKxzo=
 github.com/elastic/go-ucfg v0.8.3 h1:leywnFjzr2QneZZWhE6uWd+QN/UpP0sdJRHYyuFvkeo=
 github.com/elastic/go-ucfg v0.8.3/go.mod h1:iaiY0NBIYeasNgycLyTvhJftQlQEUO2hpF+FX0JKxzo=
@@ -745,7 +743,6 @@ github.com/godbus/dbus/v5 v5.0.5 h1:9Eg0XUhQxtkV8ykTMKtMMYY72g4NgxtRq4jgh4Ih5YM=
 github.com/godbus/dbus/v5 v5.0.5/go.mod h1:xhWf0FNVPg57R7Z0UbKHbJfkEywrmjJnf7w5xrFpKfA=
 github.com/godror/godror v0.10.4 h1:44FcfzDPp/PJZzen5Hm59SZQBhgrbR6E1KwCjg6gnJo=
 github.com/godror/godror v0.10.4/go.mod h1:9MVLtu25FBJBMHkPs0m3Ngf/VmwGcLpM2HS8PlNGw9U=
-github.com/gofrs/flock v0.7.1/go.mod h1:F1TvTiK9OcQqauNUHlbJvyl9Qa1QvF/gOUDKA14jxHU=
 github.com/gofrs/flock v0.8.1 h1:+gYjHKf32LDeiEEFhQaotPbLuUXjY5ZqxKgXy7n59aw=
 github.com/gofrs/flock v0.8.1/go.mod h1:F1TvTiK9OcQqauNUHlbJvyl9Qa1QvF/gOUDKA14jxHU=
 github.com/gofrs/uuid v3.3.0+incompatible/go.mod h1:b2aQJv3Z4Fp6yNu3cdSllBxTCLRxnplIgP/c0N/04lM=
@@ -1520,13 +1517,6 @@ github.com/urfave/cli v1.22.1/go.mod h1:Gos4lmkARVdJ6EkW0WaNv/tZAAMe9V7XWyB60NtX
 github.com/urfave/cli v1.22.2/go.mod h1:Gos4lmkARVdJ6EkW0WaNv/tZAAMe9V7XWyB60NtXRu0=
 github.com/urso/diag v0.0.0-20200210123136-21b3cc8eb797 h1:OHNw/6pXODJAB32NujjdQO/KIYQ3KAbHQfCzH81XdCs=
 github.com/urso/diag v0.0.0-20200210123136-21b3cc8eb797/go.mod h1:pNWFTeQ+V1OYT/TzWpnWb6eQBdoXpdx+H+lrH97/Oyo=
-github.com/urso/go-bin v0.0.0-20180220135811-781c575c9f0e h1:NiofbjIUI5gR+ybDsGSVH1fWyjSeDYiYVJHT1+kcsak=
-github.com/urso/go-bin v0.0.0-20180220135811-781c575c9f0e/go.mod h1:6GfHrdWBQYjFRIznu7XuQH4lYB2w8nO4bnImVKkzPOM=
-github.com/urso/magetools v0.0.0-20190919040553-290c89e0c230/go.mod h1:DFxTNgS/ExCGmmjVjSOgS2WjtfjKXgCyDzAFgbtovSA=
-github.com/urso/magetools v0.0.0-20200125210132-c2e338f92f3a h1:jWAaRFnay3H2e6S0GGCl5nKrkgQNlarCE/kvcutzBmw=
-github.com/urso/magetools v0.0.0-20200125210132-c2e338f92f3a/go.mod h1:DbaJnRzkGaWrMWm5Hz6QVnUj//x9/zjrfx8bF3J+GJY=
-github.com/urso/qcgen v0.0.0-20180131103024-0b059e7db4f4 h1:hhA8EBThzz9PztawVTycKvfETVuBqxAQ5keFlAVtbAw=
-github.com/urso/qcgen v0.0.0-20180131103024-0b059e7db4f4/go.mod h1:RspW+E2Yb7Fs7HclB2tiDaiu6Rp41BiIG4Wo1YaoXGc=
 github.com/urso/sderr v0.0.0-20210525210834-52b04e8f5c71 h1:CehQeKbysHV8J2V7AD0w8NL2x1h04kmmo/Ft5su4lU0=
 github.com/urso/sderr v0.0.0-20210525210834-52b04e8f5c71/go.mod h1:Wp40HwmjM59FkDIVFfcCb9LzBbnc0XAMp8++hJuWvSU=
 github.com/vbatts/tar-split v0.11.1/go.mod h1:LEuURwDEiWjRjwu46yU3KVGuUdVv/dcnpcEPSzR8z6g=
@@ -1867,7 +1857,6 @@ golang.org/x/sys v0.0.0-20191204072324-ce4227a45e2e/go.mod h1:h1NjWce9XRLGQEsW7w
 golang.org/x/sys v0.0.0-20191210023423-ac6580df4449/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
 golang.org/x/sys v0.0.0-20191220142924-d4481acd189f/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
 golang.org/x/sys v0.0.0-20191228213918-04cbcbbfeed8/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20200102141924-c96a22e43c9c/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
 golang.org/x/sys v0.0.0-20200106162015-b016eb3dc98e/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
 golang.org/x/sys v0.0.0-20200107162124-548cf772de50/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
 golang.org/x/sys v0.0.0-20200113162924-86b910548bc1/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=

heartbeat/heartbeat.reference.yml

@@ -343,66 +343,6 @@ heartbeat.jobs:
     # length of its retry interval each time, up to this maximum.
     #max_retry_interval: 30s
 
-  # The spool queue will store events in a local spool file, before
-  # forwarding the events to the outputs.
-  # Note: the spool queue is deprecated and will be removed in the future.
-  # Use the disk queue instead.
-  #
-  # The spool file is a circular buffer, which blocks once the file/buffer is full.
-  # Events are put into a write buffer and flushed once the write buffer
-  # is full or the flush_timeout is triggered.
-  # Once ACKed by the output, events are removed immediately from the queue,
-  # making space for new events to be persisted.
-  #spool:
-    # The file namespace configures the file path and the file creation settings.
-    # Once the file exists, the `size`, `page_size` and `prealloc` settings
-    # will have no more effect.
-    #file:
-      # Location of spool file. The default value is ${path.data}/spool.dat.
-      #path: "${path.data}/spool.dat"
-
-      # Configure file permissions if file is created. The default value is 0600.
-      #permissions: 0600
-
-      # File size hint. The spool blocks, once this limit is reached. The default value is 100 MiB.
-      #size: 100MiB
-
-      # The files page size. A file is split into multiple pages of the same size. The default value is 4KiB.
-      #page_size: 4KiB
-
-      # If prealloc is set, the required space for the file is reserved using
-      # truncate. The default value is true.
-      #prealloc: true
-
-    # Spool writer settings
-    # Events are serialized into a write buffer. The write buffer is flushed if:
-    # - The buffer limit has been reached.
-    # - The configured limit of buffered events is reached.
-    # - The flush timeout is triggered.
-    #write:
-      # Sets the write buffer size.
-      #buffer_size: 1MiB
-
-      # Maximum duration after which events are flushed if the write buffer
-      # is not full yet. The default value is 1s.
-      #flush.timeout: 1s
-
-      # Number of maximum buffered events. The write buffer is flushed once the
-      # limit is reached.
-      #flush.events: 16384
-
-      # Configure the on-disk event encoding. The encoding can be changed
-      # between restarts.
-      # Valid encodings are: json, ubjson, and cbor.
-      #codec: cbor
-    #read:
-      # Reader flush timeout, waiting for more events to become available, so
-      # to fill a complete batch as required by the outputs.
-      # If flush_timeout is 0, all available events are forwarded to the
-      # outputs immediately.
-      # The default value is 0s.
-      #flush.timeout: 0s
-
 # Sets the maximum number of CPUs that can be executing simultaneously. The
 # default is the number of logical CPUs available in the system.
 #max_procs:

journalbeat/journalbeat.reference.yml

@@ -140,66 +140,6 @@ setup.template.settings:
     # length of its retry interval each time, up to this maximum.
     #max_retry_interval: 30s
 
-  # The spool queue will store events in a local spool file, before
-  # forwarding the events to the outputs.
-  # Note: the spool queue is deprecated and will be removed in the future.
-  # Use the disk queue instead.
-  #
-  # The spool file is a circular buffer, which blocks once the file/buffer is full.
-  # Events are put into a write buffer and flushed once the write buffer
-  # is full or the flush_timeout is triggered.
-  # Once ACKed by the output, events are removed immediately from the queue,
-  # making space for new events to be persisted.
-  #spool:
-    # The file namespace configures the file path and the file creation settings.
-    # Once the file exists, the `size`, `page_size` and `prealloc` settings
-    # will have no more effect.
-    #file:
-      # Location of spool file. The default value is ${path.data}/spool.dat.
-      #path: "${path.data}/spool.dat"
-
-      # Configure file permissions if file is created. The default value is 0600.
-      #permissions: 0600
-
-      # File size hint. The spool blocks, once this limit is reached. The default value is 100 MiB.
-      #size: 100MiB
-
-      # The files page size. A file is split into multiple pages of the same size. The default value is 4KiB.
-      #page_size: 4KiB
-
-      # If prealloc is set, the required space for the file is reserved using
-      # truncate. The default value is true.
-      #prealloc: true
-
-    # Spool writer settings
-    # Events are serialized into a write buffer. The write buffer is flushed if:
-    # - The buffer limit has been reached.
-    # - The configured limit of buffered events is reached.
-    # - The flush timeout is triggered.
-    #write:
-      # Sets the write buffer size.
-      #buffer_size: 1MiB
-
-      # Maximum duration after which events are flushed if the write buffer
-      # is not full yet. The default value is 1s.
-      #flush.timeout: 1s
-
-      # Number of maximum buffered events. The write buffer is flushed once the
-      # limit is reached.
-      #flush.events: 16384
-
-      # Configure the on-disk event encoding. The encoding can be changed
-      # between restarts.
-      # Valid encodings are: json, ubjson, and cbor.
-      #codec: cbor
-    #read:
-      # Reader flush timeout, waiting for more events to become available, so
-      # to fill a complete batch as required by the outputs.
-      # If flush_timeout is 0, all available events are forwarded to the
-      # outputs immediately.
-      # The default value is 0s.
-      #flush.timeout: 0s
-
 # Sets the maximum number of CPUs that can be executing simultaneously. The
 # default is the number of logical CPUs available in the system.
 #max_procs: