Skip to content

Virtualbox appliance with Debian and Docker for Mac, with NFS server

Notifications You must be signed in to change notification settings

esimonetti/DebianDockerMac

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

6 Commits
 
 

Repository files navigation

DebianDockerMac

Virtualbox appliance running Debian with Docker for Mac. The virtual machine contains docker, docker-compose and a NFS server to locally mount the docker user's home folder.

Pre-requisites

Installation and configuration

  1. Make sure no other VirtualBox networks adapter are on the subnet 10.10.10.x or you do not run any internal network on that subnet (the routing table be checked with netstat -rn and the routing for the subnet 10.10.10.x if exists can be found with netstat -rn | grep 10.10.10)
  2. Add entry on /etc/hosts - need to use sudo to edit the file: 10.10.10.10 docker.local
  3. Access VirtualBox's network configuration for the Host Network adapter vboxnet0. Depending on the installed version of VirtualBox it can be accessed via the top-right icon Global Tools -> Host Network Manager or via the menu VirtualBox -> Preferences -> Network -> Host-only Networks
    1. On Adapter tab configure manually the followings:
      1. IPv4 Address: 10.10.10.1
      2. IPv4 Network Mask: 255.255.255.0
    2. On DHPC Server tab:
      1. Uncheck "Enable Server"
  4. Download the latest release of this git repository
  5. Import the downloaded VirtualBox appliance by accessing the menu File -> Import Appliance and follow the prompts
  6. Access the network configuration of the VirtualBox imported appliance by right clicking on the virtual machine -> Settings -> Network
    1. On the Adapter 1 tab:
      1. Make sure the Host-only Adapter Name is vboxnet0 (or the matching adapter setup on step 3)
      2. Click OK

To boot the virtual machine double click on the virtual machine and wait few seconds for it to complete. To shutdown the running virtual machine click the X on the running virtual machine, select Send the shutdown signal, click OK and wait few seconds for it to complete.

Virtual machine details

  • Hostname: docker.local
  • Ip address: 10.10.10.10
  • Credentials
    • Username: docker
    • Password: docker

Virtual machine access

SSH

To ssh into the virtual machine run ssh docker@docker.local

NFS mount

To mount and access the virtual machine folder /home/docker from your Mac complete the following steps after every boot:

  1. Open Finder
  2. Access the menu Go -> Connect to Server
  3. On Server Address enter: nfs://docker.local:/home/docker
  4. Click Connect

Network issues

If it is not possible to ssh or connect via NFS to the virtual machine, check the routing by running netstat -rn | grep 10.10.10. The expected output should be similar to:

10.10.10/24        link#15            UC              3        0 vboxnet
10.10.10.10        8:0:27:7e:51:3c    UHLWI           0       71 vboxnet   1041
10.10.10.255       ff:ff:ff:ff:ff:ff  UHLWbI          0       18 vboxnet

If the routing table does not look similar to the above, re-check the Host-only Networks adapter settings, and that the virtual machine correct adapter is selected. It might also be the case that VirtualBox requires an OS reboot before applying the routing correctly.