Spi master: remove public hidden APIs, add Config/apply_config

esp-hal/CHANGELOG.md

@@ -32,6 +32,8 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - `{Uart, UartRx, UartTx}::apply_config()` (#2449)
 - `{Uart, UartRx, UartTx}` now implement `embassy_embedded_hal::SetConfig` (#2449)
 - GPIO ETM tasks and events now accept `InputSignal` and `OutputSignal` (#2427)
+- `spi::master::Config` and `{Spi, SpiDma, SpiDmaBus}::apply_config` (#2448)
+- `embassy_embedded_hal::SetConfig` is now implemented for `{Spi, SpiDma, SpiDmaBus}` (#2448)
 
 ### Changed
 
@@ -50,6 +52,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - The `rmt::asynch::RxChannelAsync` and `rmt::asynch::TxChannelAsync` traits have been moved to `rmt` (#2430)
 - Calling `AnyPin::output_signals` on an input-only pin (ESP32 GPIO 34-39) will now result in a panic. (#2418)
 - UART configuration types have been moved to `esp_hal::uart` (#2449)
+- `spi::master::Spi::new()` no longer takes `frequency` and `mode` as a parameter. (#2448)
 
 ### Fixed
 
@@ -85,6 +88,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - The `SysTimerEtm` prefix has been removed from `timer::systimer::etm` types (#2427)
 - The `GpioEtmEventRising`, `GpioEtmEventFalling`, `GpioEtmEventAny` types have been replaced with `Event` (#2427)
 - The `TaskSet`, `TaskClear`, `TaskToggle` types have been replaced with `Task` (#2427)
+- `{Spi, SpiDma, SpiDmaBus}` configuration methods (#2448)
 
 ## [0.21.1]
 

esp-hal/MIGRATING-0.21.md

@@ -251,4 +251,28 @@ The module's contents have been moved into `uart`.
 ```
 
 If you work with multiple configurable peripherals, you may want to import the `uart` module and
-refer to the `Config` struct as `uart::Config`.
+refer to the `Config` struct as `uart::Config`.
+
+### SPI drivers can now be configured using `spi::master::Config`
+
+- The old methods to change configuration have been removed.
+- The `new` and `new_typed` constructor no longer takes `frequency` and `mode`.
+- The default configuration is now:
+  - bus frequency: 1 MHz
+  - bit order: MSB first
+  - mode: SPI mode 0
+- There are new constructors (`new_with_config`, `new_typed_with_config`) and a new `apply_config` method to apply custom configuration.
+
+```diff
+-use esp_hal::spi::{master::Spi, SpiMode};
++use esp_hal::spi::{master::{Config, Spi}, SpiMode};
+-Spi::new(SPI2, 100.kHz(), SpiMode::Mode1);
++Spi::new_with_config(
++    SPI2,
++    Config {
++        frequency: 100.kHz(),
++        mode: SpiMode::Mode0,
++        ..Config::default()
++    },
++)
+```

esp-hal/src/dma/mod.rs

@@ -19,7 +19,7 @@
 #![doc = crate::before_snippet!()]
 //! # use esp_hal::dma_buffers;
 //! # use esp_hal::gpio::Io;
-//! # use esp_hal::spi::{master::Spi, SpiMode};
+//! # use esp_hal::spi::{master::{Config, Spi}, SpiMode};
 //! # use esp_hal::dma::{Dma, DmaPriority};
 //! let dma = Dma::new(peripherals.DMA);
 #![cfg_attr(any(esp32, esp32s2), doc = "let dma_channel = dma.spi2channel;")]
@@ -30,10 +30,13 @@
 //! let mosi = io.pins.gpio4;
 //! let cs = io.pins.gpio5;
 //!
-//! let mut spi = Spi::new(
+//! let mut spi = Spi::new_with_config(
 //!     peripherals.SPI2,
-//!     100.kHz(),
-//!     SpiMode::Mode0,
+//!     Config {
+//!         frequency: 100.kHz(),
+//!         mode: SpiMode::Mode0,
+//!         ..Config::default()
+//!     },
 //! )
 //! .with_sck(sclk)
 //! .with_mosi(mosi)