Remove direct boot

CHANGELOG.md

@@ -43,6 +43,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ### Removed
 
 - Remove support for the ESP8266 (#576)
+- Remove the direct boot image format (#577)
 
 ## [2.1.0] - 2023-10-03
 

cargo-espflash/src/main.rs

@@ -16,7 +16,6 @@ use espflash::{
     },
     error::Error as EspflashError,
     flasher::{parse_partition_table, FlashData, FlashSettings},
-    image_format::ImageFormatKind,
     logging::initialize_logger,
     targets::{Chip, XtalFrequency},
     update::check_for_update,
@@ -185,9 +184,6 @@ struct FlashArgs {
 #[derive(Debug, Args)]
 #[non_exhaustive]
 struct SaveImageArgs {
-    /// Image format to flash
-    #[arg(long, value_enum)]
-    pub format: Option<ImageFormatKind>,
     #[clap(flatten)]
     build_args: BuildArgs,
     #[clap(flatten)]
@@ -327,7 +323,6 @@ fn flash(args: FlashArgs, config: &Config) -> Result<()> {
             bootloader,
             partition_table,
             args.flash_args.partition_table_offset,
-            args.flash_args.format,
             args.flash_args.target_app_partition,
             flash_settings,
             args.flash_args.min_chip_rev,
@@ -557,9 +552,6 @@ fn save_image(args: SaveImageArgs, config: &Config) -> Result<()> {
     // Since we have no `Flasher` instance and as such cannot print the board
     // information, we will print whatever information we _do_ have.
     println!("Chip type:         {}", args.save_image_args.chip);
-    if let Some(format) = args.format {
-        println!("Image format:      {:?}", format);
-    }
     println!("Merge:             {}", args.save_image_args.merge);
     println!("Skip padding:      {}", args.save_image_args.skip_padding);
     if let Some(path) = &args.save_image_args.bootloader {
@@ -579,7 +571,6 @@ fn save_image(args: SaveImageArgs, config: &Config) -> Result<()> {
         bootloader.as_deref(),
         partition_table.as_deref(),
         args.save_image_args.partition_table_offset,
-        args.format,
         args.save_image_args.target_app_partition,
         flash_settings,
         args.save_image_args.min_chip_rev,

espflash/src/bin/espflash.rs

@@ -15,7 +15,6 @@ use espflash::{
     },
     error::Error,
     flasher::{parse_partition_table, FlashData, FlashSettings},
-    image_format::ImageFormatKind,
     logging::initialize_logger,
     targets::{Chip, XtalFrequency},
     update::check_for_update,
@@ -126,9 +125,6 @@ struct FlashArgs {
 struct SaveImageArgs {
     /// ELF image to flash
     image: PathBuf,
-    /// Image format to flash
-    #[arg(long, value_enum)]
-    format: Option<ImageFormatKind>,
     /// Flashing configuration
     #[clap(flatten)]
     pub flash_config_args: FlashConfigArgs,
@@ -262,7 +258,6 @@ fn flash(args: FlashArgs, config: &Config) -> Result<()> {
             bootloader,
             partition_table,
             args.flash_args.partition_table_offset,
-            args.flash_args.format,
             args.flash_args.target_app_partition,
             flash_settings,
             args.flash_args.min_chip_rev,
@@ -324,9 +319,6 @@ fn save_image(args: SaveImageArgs, config: &Config) -> Result<()> {
     // Since we have no `Flasher` instance and as such cannot print the board
     // information, we will print whatever information we _do_ have.
     println!("Chip type:         {}", args.save_image_args.chip);
-    if let Some(format) = args.format {
-        println!("Image format:      {:?}", format);
-    }
     println!("Merge:             {}", args.save_image_args.merge);
     println!("Skip padding:      {}", args.save_image_args.skip_padding);
     if let Some(path) = &bootloader {
@@ -346,7 +338,6 @@ fn save_image(args: SaveImageArgs, config: &Config) -> Result<()> {
         bootloader,
         partition_table,
         args.save_image_args.partition_table_offset,
-        args.format,
         args.save_image_args.target_app_partition,
         flash_settings,
         args.save_image_args.min_chip_rev,

espflash/src/cli/mod.rs

@@ -34,7 +34,6 @@ use crate::{
         parse_partition_table, FlashData, FlashFrequency, FlashMode, FlashSize, Flasher,
         ProgressCallbacks,
     },
-    image_format::ImageFormatKind,
     interface::Interface,
     targets::{Chip, XtalFrequency},
 };
@@ -140,9 +139,6 @@ pub struct FlashArgs {
     /// Erase specified data partitions
     #[arg(long, value_name = "PARTS", value_enum, value_delimiter = ',')]
     pub erase_data_parts: Option<Vec<DataType>>,
-    /// Image format to flash
-    #[arg(long, value_enum)]
-    pub format: Option<ImageFormatKind>,
     /// Logging format.
     #[arg(long, short = 'L', default_value = "serial", requires = "monitor")]
     pub log_format: LogFormat,

espflash/src/error.rs

@@ -5,22 +5,21 @@ use std::{
     io,
 };
 
+use miette::Diagnostic;
+use slip_codec::SlipError;
+use strum::{FromRepr, VariantNames};
+use thiserror::Error;
+
 #[cfg(feature = "cli")]
 use crate::cli::monitor::parser::esp_defmt::DefmtError;
 #[cfg(feature = "serialport")]
 use crate::interface::SerialConfigError;
 use crate::{
     command::CommandType,
     flasher::{FlashFrequency, FlashSize},
-    image_format::ImageFormatKind,
     targets::Chip,
 };
 
-use miette::Diagnostic;
-use slip_codec::SlipError;
-use strum::{FromRepr, VariantNames};
-use thiserror::Error;
-
 /// All possible errors returned by espflash
 #[derive(Debug, Diagnostic, Error)]
 #[non_exhaustive]
@@ -107,16 +106,6 @@ pub enum Error {
     #[diagnostic(code(espflash::invalid_bootloader_path))]
     InvalidBootloaderPath,
 
-    #[error("Binary is not set up correctly to support direct boot")]
-    #[diagnostic(
-        code(espflash::invalid_direct_boot),
-        help(
-                "See the following page for documentation on how to set up your binary for direct boot:\
-                https://github.com/espressif/esp32c3-direct-boot-example"
-        )
-    )]
-    InvalidDirectBootBinary,
-
     #[error("The flash size '{0}' is invalid")]
     #[diagnostic(
         code(espflash::invalid_flash_size),
@@ -165,13 +154,6 @@ pub enum Error {
     )]
     SerialNotFound(String),
 
-    #[error("Unrecognized image format '{0}'")]
-    #[diagnostic(
-        code(espflash::unknown_format),
-        help("The following image formats are supported: {}", ImageFormatKind::VARIANTS.join(", "))
-    )]
-    UnknownImageFormat(String),
-
     #[error("The {chip} does not support {feature}")]
     #[diagnostic(code(espflash::unsupported_feature))]
     UnsupportedFeature { chip: Chip, feature: String },
@@ -221,10 +203,6 @@ pub enum Error {
     #[diagnostic(transparent)]
     RomError(#[from] RomError),
 
-    #[error(transparent)]
-    #[diagnostic(transparent)]
-    UnsupportedImageFormat(#[from] UnsupportedImageFormatError),
-
     #[cfg(feature = "serialport")]
     #[error(transparent)]
     #[diagnostic(transparent)]
@@ -517,80 +495,6 @@ impl From<&'static str> for ElfError {
     }
 }
 
-/// Unsupported image format error
-#[derive(Debug)]
-pub struct UnsupportedImageFormatError {
-    format: ImageFormatKind,
-    chip: Chip,
-    revision: Option<(u32, u32)>,
-    context: Option<String>,
-}
-
-impl UnsupportedImageFormatError {
-    pub fn new(format: ImageFormatKind, chip: Chip, revision: Option<(u32, u32)>) -> Self {
-        Self {
-            format,
-            chip,
-            revision,
-            context: None,
-        }
-    }
-
-    /// Return a comma-separated list of supported image formats
-    fn supported_formats(&self) -> String {
-        self.chip
-            .into_target()
-            .supported_image_formats()
-            .iter()
-            .map(|format| format.into())
-            .collect::<Vec<&'static str>>()
-            .join(", ")
-    }
-
-    /// Update the context of the unsupported image format error
-    pub fn with_context(mut self, ctx: String) -> Self {
-        self.context.replace(ctx);
-
-        self
-    }
-}
-
-impl std::error::Error for UnsupportedImageFormatError {}
-
-impl Display for UnsupportedImageFormatError {
-    fn fmt(&self, f: &mut Formatter) -> std::fmt::Result {
-        write!(
-            f,
-            "Image format {} is not supported by the {}",
-            self.format, self.chip
-        )?;
-
-        if let Some((major, minor)) = self.revision {
-            write!(f, " revision v{major}.{minor}")?;
-        }
-
-        Ok(())
-    }
-}
-
-impl Diagnostic for UnsupportedImageFormatError {
-    fn code<'a>(&'a self) -> Option<Box<dyn Display + 'a>> {
-        Some(Box::new("espflash::unsupported_image_format"))
-    }
-
-    fn help<'a>(&'a self) -> Option<Box<dyn Display + 'a>> {
-        if let Some(ref ctx) = self.context {
-            Some(Box::new(ctx))
-        } else {
-            Some(Box::new(format!(
-                "The following image formats are supported by the {}: {}",
-                self.chip,
-                self.supported_formats()
-            )))
-        }
-    }
-}
-
 pub(crate) trait ResultExt {
     /// Mark an error as having occurred during the flashing stage
     fn flashing(self) -> Self;

espflash/src/flasher/mod.rs

@@ -28,7 +28,6 @@ use crate::{
     command::{Command, CommandType},
     elf::{ElfFirmwareImage, FirmwareImage, RomSegment},
     error::{ConnectionError, Error, ResultExt},
-    image_format::ImageFormatKind,
     targets::{Chip, XtalFrequency},
 };
 #[cfg(feature = "serialport")]
@@ -285,7 +284,6 @@ pub struct FlashDataBuilder<'a> {
     bootloader_path: Option<&'a Path>,
     partition_table_path: Option<&'a Path>,
     partition_table_offset: Option<u32>,
-    image_format: Option<ImageFormatKind>,
     target_app_partition: Option<String>,
     flash_settings: FlashSettings,
     min_chip_rev: u16,
@@ -297,7 +295,6 @@ impl<'a> Default for FlashDataBuilder<'a> {
             bootloader_path: Default::default(),
             partition_table_path: Default::default(),
             partition_table_offset: Default::default(),
-            image_format: Default::default(),
             target_app_partition: Default::default(),
             flash_settings: FlashSettings::default(),
             min_chip_rev: Default::default(),
@@ -329,12 +326,6 @@ impl<'a> FlashDataBuilder<'a> {
         self
     }
 
-    /// Sets the image format.
-    pub fn with_image_format(mut self, image_format: ImageFormatKind) -> Self {
-        self.image_format = Some(image_format);
-        self
-    }
-
     /// Sets the label of the target app partition.
     pub fn with_target_app_partition(mut self, target_app_partition: String) -> Self {
         self.target_app_partition = Some(target_app_partition);
@@ -359,7 +350,6 @@ impl<'a> FlashDataBuilder<'a> {
             self.bootloader_path,
             self.partition_table_path,
             self.partition_table_offset,
-            self.image_format,
             self.target_app_partition,
             self.flash_settings,
             self.min_chip_rev,
@@ -374,7 +364,6 @@ pub struct FlashData {
     pub bootloader: Option<Vec<u8>>,
     pub partition_table: Option<PartitionTable>,
     pub partition_table_offset: Option<u32>,
-    pub image_format: Option<ImageFormatKind>,
     pub target_app_partition: Option<String>,
     pub flash_settings: FlashSettings,
     pub min_chip_rev: u16,
@@ -385,7 +374,6 @@ impl FlashData {
         bootloader: Option<&Path>,
         partition_table: Option<&Path>,
         partition_table_offset: Option<u32>,
-        image_format: Option<ImageFormatKind>,
         target_app_partition: Option<String>,
         flash_settings: FlashSettings,
         min_chip_rev: u16,
@@ -412,7 +400,6 @@ impl FlashData {
             bootloader,
             partition_table,
             partition_table_offset,
-            image_format,
             target_app_partition,
             flash_settings,
             min_chip_rev,