Add variants, remove 8266, split yaml for adoption (#16)

Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>

.github/workflows/ci.yml

@@ -10,12 +10,13 @@ jobs:
     strategy:
       matrix:
         file:
-          - project-template-esp32.yaml
-          - project-template-esp8266.yaml
+          - project-template-esp32-release.yaml
+          - project-template-esp32-c3-release.yaml
+          - project-template-esp32-s3-release.yaml
     steps:
       - name: Checkout source code
         uses: actions/checkout@v4.1.7
       - name: Build ESPHome firmware to verify configuration
-        uses: esphome/build-action@v3.1.0
+        uses: esphome/build-action@v3.2.0
         with:
           yaml_file: ${{ matrix.file }}

.github/workflows/publish.yml

@@ -10,6 +10,6 @@ jobs:
     uses: esphome/workflows/.github/workflows/publish.yml@main
     with:
       # CHANGEME: Set the filenames of your config files here:
-      files: project-template-esp32.yaml,project-template-esp8266.yaml
+      files: project-template-esp32-release.yaml,project-template-esp32-c3-release.yaml,project-template-esp32-s3-release.yaml
       # CHANGEME: Set the name of your project here:
       name: Template Project

project-template-esp32-adopt.yaml

@@ -0,0 +1,41 @@
+esphome:
+  name: project-template
+  friendly_name: Project Template
+  # Automatically add the mac address to the name
+  # so you can use a single firmware for all devices
+  name_add_mac_suffix: true
+
+  # This will allow for project identification,
+  # configuration and updates.
+  project:
+    name: esphome.project-template
+    version: "1.0"
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+# To be able to get logs from the device via serial and api.
+logger:
+
+# API is a requirement of the dashboard import.
+api:
+
+# OTA is required for Over-the-Air updating
+ota:
+  - platform: esphome
+
+wifi:
+  # Set up a wifi access point using the device name above
+  ap:
+
+# In combination with the `ap` this allows the user
+# to provision wifi credentials to the device.
+captive_portal:
+
+##########################################################
+# Most projects should not remove anything from above here
+# and should just modify the name, project name/version
+# and git url for the dashboard_import
+##########################################################

project-template-esp32-c3-adopt.yaml

@@ -0,0 +1,35 @@
+esphome:
+  name: project-template
+  friendly_name: Project Template
+  # Automatically add the mac address to the name
+  # so you can use a single firmware for all devices
+  name_add_mac_suffix: true
+
+  # This will allow for project identification,
+  # configuration and updates.
+  project:
+    name: esphome.project-template
+    version: "1.0"
+
+esp32:
+  board: esp32-c3-devkitm-1
+  framework:
+    type: esp-idf
+
+# To be able to get logs from the device via serial and api.
+logger:
+
+# API is a requirement of the dashboard import.
+api:
+
+# OTA is required for Over-the-Air updating
+ota:
+  - platform: esphome
+
+wifi:
+  # Set up a wifi access point using the device name above
+  ap:
+
+# In combination with the `ap` this allows the user
+# to provision wifi credentials to the device.
+captive_portal:

project-template-esp8266.yaml → project-template-esp32-c3-release.yaml

@@ -5,14 +5,16 @@ esphome:
   # so you can use a single firmware for all devices
   name_add_mac_suffix: true
 
-  # This will allow for (future) project identification,
+  # This will allow for project identification,
   # configuration and updates.
   project:
     name: esphome.project-template
     version: "1.0"
 
-esp8266:
-  board: d1_mini
+esp32:
+  board: esp32-c3-devkitm-1
+  framework:
+    type: esp-idf
 
 # To be able to get logs from the device via serial and api.
 logger:
@@ -26,25 +28,28 @@ ota:
 
 # This should point to the public location of this yaml file.
 dashboard_import:
-  package_import_url: github://esphome/esphome-project-template/project-template-esp8266.yaml@main
+  package_import_url: github://esphome/esphome-project-template/project-template-esp32-c3-adopt.yaml@main
 
 wifi:
   # Set up a wifi access point using the device name above
   ap:
-    password: "12345678"
 
 # In combination with the `ap` this allows the user
 # to provision wifi credentials to the device.
 captive_portal:
 
-
 ##########################################################
 # Most projects should not remove anything from above here
 # and should just modify the name, project name/version
 # and git url for the dashboard_import
 ##########################################################
 
 
+# Sets up Bluetooth LE (Only on ESP32) to allow the user
+# to provision wifi credentials to the device.
+esp32_improv:
+  authorizer: none
+
 # Sets up the improv via serial client for Wi-Fi provisioning.
 # Handy if your device has a usb port for the user to add credentials when they first get it.
 improv_serial:

project-template-esp32.yaml → project-template-esp32-release.yaml

@@ -28,12 +28,11 @@ ota:
 
 # This should point to the public location of this yaml file.
 dashboard_import:
-  package_import_url: github://esphome/esphome-project-template/project-template-esp32.yaml@main
+  package_import_url: github://esphome/esphome-project-template/project-template-esp32-adopt.yaml@main
 
 wifi:
   # Set up a wifi access point using the device name above
   ap:
-    password: "12345678"
 
 # In combination with the `ap` this allows the user
 # to provision wifi credentials to the device.

project-template-esp32-s3-adopt.yaml

@@ -0,0 +1,36 @@
+esphome:
+  name: project-template
+  friendly_name: Project Template
+  # Automatically add the mac address to the name
+  # so you can use a single firmware for all devices
+  name_add_mac_suffix: true
+
+  # This will allow for project identification,
+  # configuration and updates.
+  project:
+    name: esphome.project-template
+    version: "1.0"
+
+esp32:
+  board: esp32-s3-devkitc-1
+  variant: esp32s3
+  framework:
+    type: esp-idf
+
+# To be able to get logs from the device via serial and api.
+logger:
+
+# API is a requirement of the dashboard import.
+api:
+
+# OTA is required for Over-the-Air updating
+ota:
+  - platform: esphome
+
+wifi:
+  # Set up a wifi access point using the device name above
+  ap:
+
+# In combination with the `ap` this allows the user
+# to provision wifi credentials to the device.
+captive_portal:

project-template-esp32-s3-release.yaml

@@ -0,0 +1,56 @@
+esphome:
+  name: project-template
+  friendly_name: Project Template
+  # Automatically add the mac address to the name
+  # so you can use a single firmware for all devices
+  name_add_mac_suffix: true
+
+  # This will allow for project identification,
+  # configuration and updates.
+  project:
+    name: esphome.project-template
+    version: "1.0"
+
+esp32:
+  board: esp32-s3-devkitc-1
+  variant: esp32s3
+  framework:
+    type: esp-idf
+
+# To be able to get logs from the device via serial and api.
+logger:
+
+# API is a requirement of the dashboard import.
+api:
+
+# OTA is required for Over-the-Air updating
+ota:
+  - platform: esphome
+
+# This should point to the public location of this yaml file.
+dashboard_import:
+  package_import_url: github://esphome/esphome-project-template/project-template-esp32-s3-adopt.yaml@main
+
+wifi:
+  # Set up a wifi access point using the device name above
+  ap:
+
+# In combination with the `ap` this allows the user
+# to provision wifi credentials to the device.
+captive_portal:
+
+##########################################################
+# Most projects should not remove anything from above here
+# and should just modify the name, project name/version
+# and git url for the dashboard_import
+##########################################################
+
+
+# Sets up Bluetooth LE (Only on ESP32) to allow the user
+# to provision wifi credentials to the device.
+esp32_improv:
+  authorizer: none
+
+# Sets up the improv via serial client for Wi-Fi provisioning.
+# Handy if your device has a usb port for the user to add credentials when they first get it.
+improv_serial: