Bump version #342
Merged
Bump version #342
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
tynes
approved these changes
Oct 28, 2020
protolambda
pushed a commit
to protolambda/optimism
that referenced
this pull request
May 1, 2022
…mism#342) Previously we assumed that every deposit would be included in the L2 block. However, the L2 execution engine removes depoists that are not valid. As such the number of deposits submitted to the execution engine could be greater than the number of transactions returned causing a panic. This fixes the issue by counting the number of deposits returned and using that to slice the payload transactions for batch submission. (Deposits are not submitted in batches and instead read directly from L1). This also does more sanity checks on the transactions included in the L2 block and rejects blocks with invalid deposit tx configurations. This is done prior to marking the payload canonical with the FCU.
Merged
mergify bot
pushed a commit
that referenced
this pull request
May 16, 2022
* opnode: Reconcile epochs and handle reorgs (#309) * opnode: Switch to uint64 in FindL2Heads function * opnode: Properly initialize state loop This properly sets the L1 head, L2 Head, and L2 Unsafe Head during `state.Start()` in normal operation and when the current L1 head has not reached the L1 genesis. * opnode: Rename output functions The old names where not good. In addition, this standardizes the order of arguements and extends the returns. The returns are not fully used, but will be. * opnode: Add sanity check to L1 window in insertEpoch This make sure that the L1 window starts at the correct block. * opnode: Split out loop Now each action occurs in a seperate function. The state loop is still responsible for sequencing follow-up actions, but is not responsible for setting state. * opnode: Better name for batch prepare functions This name indicates that it provides missing batches. * opnode: Verify epochs as sequencer Sequencers now verify epochs and will reorg if they see that verified epochs do not match what they created. * opnode: Mute driver test * opnode: Set L2 Geth forkchoice on reorg This is required to handle L1 reorgs (rather than just missing batches). * opnode: Bump op-geth version Needed to fix a bug where the L2 geth node was missing the `mint` field in deposit transactions when returning them over the JSON RPC server. * opnode: Don't incorrectly advance safehead There is some L2 block that is possible to fully derive from L1; however, if it is ahead of the current state's safe head, do not advance the current state's safehead because the chain has not been verified up to that point. * opnode: Don't rebuild L1 Genesis Block ID Co-authored-by: Diederik Loerakker <proto@protolambda.com> * opnode: More comments Co-authored-by: Diederik Loerakker <proto@protolambda.com> * opnode: Don't cast slice Co-authored-by: Diederik Loerakker <proto@protolambda.com> * opnode: PR comments * opnode: Better error reason in attributesMatch Include the details of the mismatched fields in addition to what field it was. Will make diagnosing errors much easier. Co-authored-by: Diederik Loerakker <proto@protolambda.com> * go.mod: update to squashed l2 geth diff d5e1fc1a74bda3cbe5715d5732621460f9e00908 * opnode/rollup: use L2 block height in L1-info deposit tx block-height field (tx field, not info field) for uniqueness of deposit tx hash on L2 * feat: DepositFeed receive function It is convenient for users to be able to deposit funds directly to L2 by simply doing an ETH send to an address. The prevents needing an ABI. * Update slither db * Add solidity test on df.receive() function * Add warning message on DepositFeed.receive() * specs: Add Withdrawals specification * contracts: Add withdrawor and start of tests * ops: Add withdrawor predeploy to docker setup ops: Add contract code to Makefile and Dockerfile * Add gaslimit to withdrawal encoding * test(contracts): Withdrawal creation and proof gen * deps: install entire goddamn monorepo using forge. I needed the trie contracts over here, so now the whole monorepo is a submodule of the specs repo. Happy now @norswap? Why, you ask, did I do this rather than the alternatives available to me? 1. Copying and pasting is gross. 2. `yarn add` would have installed a smaller dep, but it's also gross. 3. git submodules, while also gross in their own right, is at least consistent with how we're currently handling other dependencies, so I went with that. * Add output root inclusion proof Adds a check to ensure that withdrawal root is included in the l2 output root. * Add storage inclusion proof Adds a check to ensure that the withdrawal message hash is included in the mapping of withdrawals in the withdrawer contract * Improve testing against L2 node * Add finalizationWindow var to WithdrawalVerifier * Add WithdrawalVerified event * Remove unused constructor argument * Clean up Forge test of WithdrawalVerifier * ops: Docker get l2 genesis hash on startup Docker fixes * contracts: ignore dirty submodules * Don't run hardhat tests in CI * Create Optimism Portal contract * Move receive function to OptimismPortal * specs: Add overview page (#286) * Convert WithdrawalVerifier to a library This changes the WithdrawalVerifier to be stateless, and moves all checks into the OptimismPortal * contracts: Rename Withdrawor to Withdrawer * specs: define timestamp bounds of derivation process, clear up block derivation, define missing noTxPool field * opnode/rollup: implement new timestamp bounds on block derivation batch filtering and filling * opnode: fix sequencer L1 origin advancing, and fix e2e genesis time * contracts: Add burn function to the Withdrawer contract * contracts: Add natspec comments * contracts: Remove timestamp from OutputRootProof * contracts: undoL1ToL2Alias on withdrawals from a contract Also uses AddressAliasHelper lib for aliasing instead of reimplementing it. * specs/rollup-node: improve spec based on review suggestions from @norswap * opnode/rollup: implement review suggestions from @trianglesphere * specs/rollup-node: document timestamp invariant between L2 and L1 origin * opnode/rollup/driver: continue sequencing on current epoch if next L1 origin timestamp is not reached yet * opnode/rollup: fix maxL2Time excl bound, and return adjusted maxL2time in long L1 gap case * contracts: Add withdrawer tests fixup! contracts: Add burn function to the Withdrawer contract * Rename Finalization Window to Finalization Period * contracts: Validate output root proof in portal Moves the comparison into the Portal contract, and changes the WithdrawalVerifier function from _verifyWithdrawerStorageRoot to _deriveOutputRoot. * contracts: Use solidity custom errors * contracts: Use unchecked math when safe * contracts: Add section dividers to contract layout * specs: Update withdrawals spec to match impl * contracts: Fix ETH burning in the withdrawer contract * specs: Address review comments * ops: Address review comments * Update Dockerfile.opnode * ops: Fix devnet - Fixes the devnet config to correctly generate rollup/genesis files. - Fixes a bug that causes the rollup node to get stuck when there's a large timestamp delta between genesis and the current time, as is the case in the devnet. * Update opnode/rollup/driver/state.go Co-authored-by: Diederik Loerakker <proto@protolambda.com> * Update rollup.json * Update predeploy addresses The new predeploy addresses are incremented by 1 in order to avoid conflicts with the system addresses. * tests: Add tests for batch requests when the parent request fails This test makes sure that we do not retry when the parent request fails. We don't, but it wasn't immediately clear. I also removed a duplicate assertion lib since we're using `testify` everywhere else. * opnode: Don't start sequencing blocks until past the L1 genesis (#325) This has to be reverted to ensure that the sequencer starts producing blocks at the same location as the verifier. Sometimes the previous code would cause reorgs on the sequencer (expected), and sometimes it would cause a chain split (unexpected and unexplained as of writing this commit message 4/6/22). * opnode: update to latest L2 geth * readme: fix typos and break lines (#327) * Update ref optimistic geth image (#328) * ci: Improve timestamp management in devnet (#329) This change sets timestamps to the current timestamp on fresh devnet deploys. This avoids the devnet having to fill in a bunch of blocks on startup. The timestamp is preserved between runs; `make devnet-clean` will erase the timestamp data if you want to start anew. * contracts: Move withdrawal logic into abstract contract * contracts: Move withdrawal hashing logic into library * contracts: Update .gas-snapshot * contracts: silence compiler warnings * feat: expose debug http api (#334) * opnode: Use l2 safe head instead of l2 head Epochs should be inserted on top of the L2 Safe Head, not the unsafe head. This was causing problems when a reorg would occur and the node would start building in the wrong spot. * opnode: Clear l1WindowBuf on insertEpoch failure This is done to handle the case that the l1WindowBuf does not start in the correct location (direct check is difficult with context). The correct response to that is to clear the window and initialize it from the correct block. * hardhat: clean up the hardhat deposit task * fix: oe => optimism (#338) * opnode: Rework state test to build on safe head This also got caught up in the unsafe/safe head confusion. * opnode: fix setL1BlockValues selector used for deposits (#339) Solidity ABI only looks at the function name and types, but does not consider the name of the function parameters. * rollup: fix address of the L1 Block Attributes contracts * fix: typo in l1InfoPredeployAddress * fix: gofmt and goimports CI was asking for goimport'd when all it needed was gofmt. * opnode: Import constants * ops: fix formatting, add docker buildkit support * ops: prune volumes on devnet-down * fix: replace fraud with fault (#337) * opnode: Fix bug in block creation (#345) The NoTxPool flag was incorrectly set to falses in the InsertEpoch function. * opnode: Don't allow arbitrary mints (#346) The ordering of `mint, value` was switched to be `value, mint` when parsing emitted logs. This allows users to control their mint rather than using `msg.value` which is being fed directly into the event. Thanks to Mofi (Inphi) for finding this. * opnode,specs: deposit tx-hash uniqueness based on L1 * opnode/l1: verify critical receipt/log info we get from RPC * opnode/test: reconstruct deposit hash in e2e test, fetch l2 deposit receipt * opnode/l1: fix panic on channel send after close, sema channel can stay open * go.mod: l2 geth update with improved deposit tx hash * README: remove alpha branch + update description (#332) * allow building everything from top-level makefile * allow testing from top level makefile * Update Makefile Co-authored-by: Joshua Gutow <jgutow@optimism.io> * opnode/l1: wrap errors and fmt test imports * opnode: don't expose types.Block to derive or driver packages, prefer l2.ExecutionPayload * opnode: add comments, fix genesis base case to get l1 origin * init: integration tests (#344) Co-authored-by: Javed Khan <tuxcanfly@gmail.com> * opnode: Fix possible panic in sequencer batch creation (#342) Previously we assumed that every deposit would be included in the L2 block. However, the L2 execution engine removes depoists that are not valid. As such the number of deposits submitted to the execution engine could be greater than the number of transactions returned causing a panic. This fixes the issue by counting the number of deposits returned and using that to slice the payload transactions for batch submission. (Deposits are not submitted in batches and instead read directly from L1). This also does more sanity checks on the transactions included in the L2 block and rejects blocks with invalid deposit tx configurations. This is done prior to marking the payload canonical with the FCU. * opnode: Test Utilities (#319) * opnode: Deduplicate fake chain source The fake chain source is an easy way to create and L1 and L2 chains from a simple string defition. There were previously two implementations and now they are in a shared testutils package. * opnode: Dedicated wait functions This deduplicates wait for transactions on L1 and L2. * opnode: New e2e test system This splits out the initialization from the actual tests to eanble multiple e2e tests. Some of the config is still not as dedpulicated as I would like, but it is more centralized than it previously was. Aims to move the setup from the tests and enable easier e2e tests. * opnode: Silence FindSyncStartTest * opnode: Add test for missing batches This ensures the the sequencer follows the chain that is derived from L1 rather than what it sequenced in the case that it misses batch submission. * opnode: Pull out system config to default cfg This reduces duplication and makes tests easier to understand. * opnode: Address PR comments * opnode: Reduce flakiness in missing batch test The proper way to do this is to wait for a safe block, but the API is not yet ready for that. * Fix sync-start bug + improve sync-start comments (#355) Fix bug (L1 origin head with non-canonical ancestors) This happened in the scenario where `l2ahead == true` (L1 origin of start is ahead of know L1 head) and `start` had an ancestor whose L1 origin was known not to be canonical. Example: L1 head is at block X. `start` has an L1 origin with number X + 1 but its parent L2 block has an L1 origin with number X whose blockhash is not canonical. In this case, the algorithm still returned `start` as the unsafe L1 head, which is incorrect. This also touches a bunch of comments to generally improve understanbility. * feat: deposit tx js helpers (#352) * feat: js deposit tx Hardhat task now lists the tx hash * rollup: new deposit hashing * nice api! * fix: dockerfile * devnet: Hardcode deposit feed bytecode (#359) * opnode,l2os: Better lifecycle management (#358) * opnode: Properly wait for limit client to shut down We removed closing the semaphore channel because it would cause a panic as we did not wait for in flight requests (and new requests) to stop before closing the L1 source. * l2os: Change shutdown procedure This is now blocking, but also reuces the amount of error logs. * opnode: Shutdown rollup nodes before clients/geth nodes Also actually shuts down the L2 clients in the rollup node. * opnode: Properly shut everything down * style: clean up and comments for state.go (#356) * opnode: Parameterize deposit contract address (#361) The contract can be deployed to any address. It is set in the rollup config file. * opnode/test: Add reverted deposit with mint test * fix(ci): use Foundry GHA (#367) Nightly Foundry releases are kept around for 3 days. This means we cannot be pinning the download link on CI to a specific commit. Instead, we use the Foundry Toolchain GHA which always uses the latest nightly version. * opnode/test: check nonce increment in deposit fail * integration-tests: End-to-end withdrawal test (#362) Includes several fixes to make this work: - Modifies the devnet to deploy the L1 contracts rather than include them in genesis. - Changes the deployment of L2OutputOracle to support a custom start timestamp. - Updates UserDeposits to properly filter out non-TransactionDeposited events. - Updates the L2 output submitter to post the current L1 block with each output rather than the L2 checkpoint block - Updates the opnode API to allow all vhosts and CORS domains. * go.mod: bump l2geth version * opnode: Update and deploy contracts (#360) This is rather than hardcoding the contract bytecode. It slows down the e2e tests (by having to wait 1 L1 block for contracts to be ready), but it is more accurate to what occurs (and is now required as we initialize actions). This also pins the L2OutputOracle to v0.8.10 of solidity. * specs: Update output root derivation (#357) * specs: Update output root derivation * specs: Separate version from payload * opnode: libp2p setup * p2p flags, config, and libp2p + discv5 setup * specs: initial rollup node p2p spec * specs: Fix definition of output root * solidity: fail if updated gas snapshot isn't included A new gas snapshot can be generated by running `forge snapshot` * p2p setup: implement review suggestions, fix toc, fix lint * opnode/p2p: test with require instead of assert * contracts: Fix reentrancy attack in WithdrawalsRelay (#378) * contracts: Output oracle improvements (#370) * contracts: Use correct uppercase for immutables * itest: shorten submission interval for faster devnet tests * contracts: Ensure submission interval is multiple of block time * itest: Simplify withdrawals spec * itest: Increase withdrawal finalization timeout * itest: Bump withdrawal timeout to +5 minutes * Bump timeout * Bump again * Add gas snap Co-authored-by: Matthew Slipper <me@matthewslipper.com> * Clean up withdrawals itest (#372) * contracts: Use correct uppercase for immutables * itest: shorten submission interval for faster devnet tests * contracts: Ensure submission interval is multiple of block time * itest: Simplify withdrawals spec * itest: Increase withdrawal finalization timeout * itest: Bump withdrawal timeout to +5 minutes * itest: Extract logic into getTargetOutput * Update 000_withdrawals.spec.ts Co-authored-by: Matthew Slipper <me@matthewslipper.com> * fix dead anchor link * higher difficulty rather than number * 'L1 attributes block' is not a thing + add link * try to align sentences with lines * ci: Add automated docker builds for opnode and l2 output submitter (#369) * contracts: Add deleteL2Output function * specs: Add deleteL2Output * ci: Update Docker version in CircleCi (#381) We ran into this on the monorepo too. Alpine 3.14 removes the `faccessat2` syscall. This caused "operation not permitted" errors while building. Upgrading Circle's Docker version fixes this. See https://wiki.alpinelinux.org/wiki/Release_Notes_for_Alpine_3.14.0#faccessat2 for more information. * contracts: reuse code (#380) * contracts: reuse the library to compute withdrawal hash The `WithdrawalVerifier` has a method to compute the withdrawal hash as part of a library. Use this library in both the L1 and L2 contracts so that code can be reused. * contracts: gas snapshot * opnode: Better parsing of the TransactionDepositedEvent (#382) This now asserts that the offset for the bytes field of the event is the correct value rather than the previous incorrect check. This check is not fully necessary, but good to have to validate that the data is well formed. * Makefile,ops: docker compose up instead of run to make devnet-down work, and fix makefile label (#385) * opnode: Do not drop all deposits on parsing error (#383) * Change deposit gasLimit from uint256 to uint64 This prevents the user from setting a gas limit that the rollup node is not able to parse. * opnode: Do not drop all deposits on parsing error Only drop the affected deposit. This does mean loss of funds, but this is also a case that should never happen. In addition, halting the chain means that while funds are safe, we are exposed to a denial of service attack if it would be possible to cause a parsing error from the deposit feed contract. * opnode/test: Provide flag to access geth logs (#389) This enables a more verbose output without having to modify the test itself. Provide the flag `gethlogs` to see logs from geth. * opnode: Fix L1 Info Transactions There are three issues being fixed: 1. Set the `from` field to the correct magic value (found by ToB) 2. Update the L2 EE to provide gas to deposits. Otherwise the deposit transactions immediatley out of gas and fail. 3. Update the manual ABI encoding to match what solidity expects. The previous version was similar to packed encodeding, but as such could not be parsed by solidity. This also includes a regression test that the parsing of the L1 info tx and what is recorded in the state for each block matches. * contracts: import messengers (#393) * chore: copy L1 and L2 Messengers from Monorepo * test: Add Messenger test files Monorepo test cases are copied in as comments from the monorepo ts tests. * chore: Add OZ upgradable contracts New remappings were also added in order to avoid excessively long import statements. * chore: Importe OZ and OP contracts as node_modules Necessary because hardhat does not support remappings!?! y u no? * refactor: Remove replayMessage() We no longer need this function as it was only necessary when the CTC a maximum gas limit per epoch concept. In order to remove the function I had to copy in the L1xDM interface rather than import from the node_modules. * chore: Remove unused files The ts test file is made redundant by an itest in the itest package. The sol test file was not being used for anything * refactor: Remove Address Manager and Resolver Instead the CTC and SCC are state variables * refactor: Replace CTC with OptimismPortal * refactor: Remove SCC We don't need to replace it with the L2OutputOracle in the L1xDM, because the verification is now done in the OptimismPortal itself. * forge install: forge-std * forge install: ds-test * refactor: Move boilerplate test code into CommonTest * test: Add sendMessage and pause tests for L1xDM * test: L1CrossDomainMessenger sendMessage and pause * refactor: replace L2ToL1MessagePasser with Withdrawer contract Also adds a lib with constant values for new bedrock predeploys. * chore: Make functions external, and reorder for CEI For whatever reason a bunch of functions on the messengers were public, when they could have been external. I fixed that, and removed the slither annotations. Where possible (in the sendMessage functions), I also reordered the events and calls to respect Checks-Effects-Interactions. There was no risk previously, but this removes any question, and quiets slither. * refactor: Reorganize ts helpers Move helpers/index into utils.ts, and add other files which are exported in the new index.ts. * test: Add mock proof generation script and helpers * test: Add L1xDM relayMessageSucceeds tests * test: Add proof generation scripts and helpers * refactor: Add l2Sender check in L2xDM * refactor: Copy in the L1 and L2 standard bridge At this point they are simply verbatim. * refactor: Bridges - fix import paths * refactor: Token Bridge - replace messengers with Portal Also remove the CrossDomainEnabled lib. refactor: Token Bridge - replace messengers with Portal Also remove the CrossDomainEnabled lib. * style: Address/remove some slither disable comments style: Address/remove some slither disable comments * refactor: extract l2Sender check into a modifier * refactor: Support deposits of ETH in L2 Bridge This copies in the IL2ERC20Bridge interface so that payable can be added. In the case that the L2 token address matches OVM_ETH, the value of the call will be forwarded. * interface: add IWithdrawer.sol * contracts: add comments to L1 contracts * contracts: use unchecked * contracts: fix imports in common test * test: L1CrossDomainMessenger * test: L2CrossDomainMessenger * contracts: fix typo * tests: bridge tests * contracts: remove extra message assignment * contracts: update gas snapshot * forge install: solmate * contracts: remove usage of OVM_ETH All `OVM_ETH` will be migrated to `ETH` with the upgrade to bedrock. We do not want to allow for the creation of new `OVM_ETH` by depositing `ETH` into the bridge and have it create `OVM_ETH` on L2. * contracts: add in L2StandardERC20 * contracts: add in token factory The token factory will deploy tokens on L2 that correspond to tokens on L1. This allows for easy deposits through the bridge. * contracts: test rlp lib for computing contract addrs This library lets you compute the contract address based on the deployment account and nonce. h/t @t11s * contracts: test infra for bridge * contracts: add note to self * contracts: fix compiler warnings * contracts: update snapshot * contracts: add IDepositFeed * contracts: type cast uint256 to uint64 in messenger * test: fix merge * contracts: modify paths to compile with hardhat * hardhat: update config * contracts: fix build * forge tests: first yarn install * contracts: lint * contracts: update snapshot Co-authored-by: Maurelian <maurelian@protonmail.ch> * contracts: fix abi encoding in proof verification (#395) Use `abi.encode` instead of `abi.encodePacked` to ensure a constant serialization. `abi.encode` will be sure to pad the value to its size while `abi.encodePacked` will not when operating on integers. There should not have been a bug here because it was being called with a `bytes32`, which should always be 32 bytes when returned from `abi.encodePacked`. * contracts: don't unalias on L2->L1 Co-authored-by: smartcontracts <kelvin@optimism.io> * opnode: attach p2p host and discovery to rollup node, update e2e test (#388) * deps: update forge-std * contracts: fix build * build: fix bindings build * fix: builds * forge install: ds-test * build: fix for good * l2os: update bindings * opnode: add seq nr to l1-info to fix driver bug * feat: create opnode/predeploy package This resolves an import cycle when trying to use WithdrawalContractAddress in opnode/node. Otherwise the compiler complains that opnode imports opnode/node which imports opnode. * opnode: refactor RPC server / config, prototype batch serving * feat: enforce size contraints on batch bundles This algorithm is modeled mostly off the one used in the existing batch submitter. The additional complexity enables us to configure a min and max value such that max - min < max_l2_tx_size. Applied strictly, submitting a large L2 tx would cause the batch construct to halt, since the batch constructed without including batch `i` can be under the min, while including batch `i` resulting in exceeding the maximum. The additional complexity in the pruning algorithm is used to identify this case and submit an undersized batch when it cannot be avoided. In the general case, however, this strategy increases our expected profitibability since the average batch size is closer to the desired maximum. * feat: add BundleBuilder helper class * fix: typo in l2os config docs * feat: add GetBatchBundle method to rollupclient.RollupClient * feat: simplify l2os rollupclient init * feat: reduce BSS poll interval The current setup assumes the batches are submitted very soon after the block is created on L2. Increasing the poll interval ensures that we discover and publish new batches in response. Without modifying this value, the subsequent changes will still fail even though the code is correct. * feat: add sequencer history db * feat: add sequencer BSS driver to submit batches * feat: add bss configuration * feat: add LOG_TERMINAL flag to l2os, use non-global log instance Also modifies the shutdown logic of l2os.Service to abort if stuck publishing a transaction. * feat: enable standalone bss, disable simple bss * feat: remove simple bss * feat: add bss to devnet * fix: ci build bindings (#406) * ci: build bindings in ci * ci: install abigen * ci: fix geth install * bindings: regenerate * contracts: no metadata hash in contracts * bindings: regenerate * opnode: Avoid busy-waiting while L2 head is behind L1 In the state select loop, we immediately request for new L2 blocks whenever the latest L1 origin is behind L1. This can be an issue as we attempt to re-request the latest L2 block without any delay. This is a DoS hazard particularly when an L2 block cannot be retrieved because either the `L1Chain` or `L2Chain` backends have errors. Another problem with this is that other, more useful events in the state select loop, are less likely to be scheduled by the Go runtime due to the busy-wait. Adding a small delay, before calling `reql2BlockCreation` of about 10ms should be enough to prevent issues. * opnode: Fix Incorrect error handling when creating an L2 block (#391) * opnode: Fix Incorrect error handling when creating an L2 block This is an issue ToB identified (issue #8). What happens is that the ethereum.NotFound error would never be returned, but in general if there is an error in the lookup, the state loop should keep going. * opnode: Properly wrap errors in l1/source.go * opnode: Fuzz manual ABI parsing (#384) * opnode: Add OptimismPortal deployed bytecode This is important for fuzzing * opnode: Add differential fuzzing test for deposit events fixup: Proper tests * build: Add fuzz target * opnode: Fix ineffctual error assignment * opnode: More fuzzing cleanup The purpose of this is to make it more likely that the deposit succeeds and that we fuzz what we actually want to fuzz (the parsing). * fix: DepositFeed.sol link * opnode: gossip blocks topic validator and subscriber * opnode/l2: ExecutionPayload SSZ encoding/decoding * opnode/l2: check payload block hash consistency * opnode/p2p,specs: update p2p block gossip validation * opnode: refactor node initialization, change l1-head fan out, implement l2 payload driver receiver, setup block signing, update config / cli / e2e * opnode/l2,opnode/rollup/driver: process incoming unsafe L2 blocks * specs/rollup-node-p2p: fix toc * opnode/p2p: compress published messages * specs/rollup-node-p2p: clarify hardfork version start * opnode/node: fix l1 head notify timeout bug * opnode: fix receive p2p payload timeout bug, fix publishing buffer missing reset * opnode: fix/improve new loggers * opnode: fix p2p block distribution * opnode/test: connect peers only after starting p2p application-layer protocols * ops,opnode/p2p: fix opnode start up in devnet * opnode/l2: use common.Big0 instead of big.NewInt(0), thx mark * opnode: Add debug tracer to geth in e2e test (#418) * Update reference geth entrypoint with variable parameters * opnode: fix imports and code newlines style * opnode,specs: gossip blocks validation seen cache fixes * opnode/rollup/driver: no heuristics in driver, rely more on engine to handle reorgs * opnode: tracer to watch node events during testing * opnode,specs: clarify gossip params * opnode/l2/ssz: fix lousy copy range * opnode/rollup/driver/state: fix doc typo Co-authored-by: Joshua Gutow <jgutow@optimism.io> * Add version RPC (#432) Meta: - Fixes ENG-2200 * refactor: new messengers (#421) * contracts: consolidate OptimismPortal Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: delete abstracts Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: base `CrossDomainMessenger` + L1 and L2 Implement the `L1CrossDomainMessenger` and `L2CrossDomainMessenger` based on the base `CrossDomainMessenger`. This makes the interfaces the same on both sides. Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: `StandardBridge` Also implement the `L1StandardBridge` and `L2StandardBridge` based off of the base `StandardBridge` Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: L2OutputOracle Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: standard bridge tests Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: cross domain hashing lib + tests Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: tests for cross domain messengers Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: L2ToL1MessagePasser Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: safe call lib Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: optimism mintable erc20 Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: common test setup Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: optimism mintable token factory Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: update forge-std Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: test OptimismPortal Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: L1Block attributes Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: update libraries Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: update foundry.toml Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: Burner Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: delete dead code Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: update hh deploy scripts Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: update gas snapshot Co-authored-by: smartcontracts <kelvin@optimism.io> * integration-tests: update for new messengers Co-authored-by: smartcontracts <kelvin@optimism.io> * ops: devnet up script new genesis Co-authored-by: smartcontracts <kelvin@optimism.io> * opnode: new bindings Co-authored-by: smartcontracts <kelvin@optimism.io> * l2os: new bindings Co-authored-by: smartcontracts <kelvin@optimism.io> * contracts: update gas snapshot Co-authored-by: smartcontracts <kelvin@optimism.io> * specs: L2ToL1MessagePasser * specs: messengers * specs: bridges * specs: fix linting issues * contracts: better contract for is optimism mintable * contracts: fix some comments * contracts: assert finalization window has passed * bindings: regenerate * contracts: address comments Co-authored-by: Mark Tyneway <mark.tyneway@gmail.com> * opnode: p2p RPC, fix static-peers * StateViz: Visualize rollup state changes (#419) * StateViz: Visualize rollup state changes * remove DEBUGMEs * Add L1WindowBuf to viz * move stateviz to opnode/cmd * Add stateviz to docker-compose * html lint * Add SRI * Fix linter * Merge fixes * Fixes from code review * Imports * Fix space Co-authored-by: Matthew Slipper <me@matthewslipper.com> * contracts: add backup logic for deposits Introduces backup logic for deposits that prevents users from accidentally making bad deposits. Deposits that don't complete successfully will be returned back to the layer where the deposits were made. * contracts: add base gas to sent messages Introduces base gas to the CrossDomainMessenger's sendMessage function. Base gas is used to guarantee that all messages sent between messengers will at the very least be able to store the message hash on the other chain and therefore be replayable. Base gas scales dynamically with the size of the message. * contracts: use clearer message encoding Uses the clearer abi.encodeWithSelector within CrossDomainMessenger's sendMessage function. Doing this makes it much more apparent that a call to the relayMessage function is being triggered. * contracts: add L1BlockNumber predeploy Re-introduces the L1BlockNumber predeployed contract for backwards compatibility with the previous OVM_L1BlockNumber contract. * opnode: p2p rpc client bindings, test update, minor p2p flag update * opnode/p2p: set up connection notification before starting host B * opnode/p2p: bundle p2p components into p2p node for separate testing * opnode/p2p: minor style fix + rename * opnode/p2p: add method to get peer info about self * Fix SRI on stateviz (#440) * Fix L2 Output Timestamps (#416) There was an off by one error in the L2 Output Oracle contract in the timestamp to block number conversion. In addition, the L2 Output Submitter (op proposer) did not recognize that there was a mismatch between the timestamp/block number in the header and the timestamp/block number from the contract. This bug causes problems when trying to do withdrawals. Fixes ENG-2128 * opnode: Withdrawal E2E test in go (#423) This does the following: - Adds withdrawal utilities (to opnode/withdrawals) - Adds an end to end test in go of withdrawals - Adds the L2 withdrawer contract - Updates to a newer version of reference-go-ethereum Fixes ENG-2202 * Adopt go.work, rename modules to prep for monorepo (#441) Co-Authored-By: Matthew Slipper <me@matthewslipper.com> Co-authored-by: protolambda <proto@protolambda.com> * remove git submodules * optimistic-specs: monorepo merge, mv into protocol dir * bedrock contracts dependencies * monorepo merge: fix Go env * monorepo merge: move contracts-bedrock into non-Lerna package * monorepo merge: bring back CI Known issues: - There are broken links that `lychee` picks up on. These still need to be updated. - Slither returns errors, both here and in `optimistic-specs`. - `go-bip39` was updated to a newer version. The newer version broke a `bss-core` test, which had to be fixed. - Forge is not compatible with Lerna. As a result, the `contracts-bedrock` package had to be moved out of the `packages` hierarchy. - The devnet itests don't work because the Go modules aren't on the default branch. We need to decide if we merge to develop, or stay on a feature branch before fixing this. * outline bedrock dirs, rm stale protocol repo files (#2562) * monorepo merge: re-run yarn Co-authored-by: Joshua Gutow <jgutow@optimism.io> Co-authored-by: Diederik Loerakker <proto@protolambda.com> Co-authored-by: Mark Tyneway <mark.tyneway@gmail.com> Co-authored-by: Maurelian <maurelian@protonmail.ch> Co-authored-by: smartcontracts <kelvin@optimism.io> Co-authored-by: Murphy Law <Inphi@users.noreply.github.com> Co-authored-by: norswap <norswap@gmail.com> Co-authored-by: Javed Khan <tuxcanfly@gmail.com> Co-authored-by: Murphy Law <mlaw2501@gmail.com> Co-authored-by: Georgios Konstantopoulos <me@gakonst.com> Co-authored-by: Conner Fromknecht <conner@alum.mit.edu> Co-authored-by: Luca Donno <30298476+lucadonnoh@users.noreply.github.com> Co-authored-by: Ben Wilson <bwilson@optimism.io> Co-authored-by: Ben Wilson <82120899+optimisticben@users.noreply.github.com>
bap2pecs
added a commit
to babylonlabs-io/optimism
that referenced
this pull request
Jul 31, 2024
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
Bump version of provider
Contributing Agreement