eth/protocols/snap: throttle trie heal requests when peers DoS us (#2…

…5666)

* eth/protocols/snap: throttle trie heal requests when peers DoS us

* eth/protocols/snap: lower heal throttle log to debug

Co-authored-by: Martin Holst Swende <martin@swende.se>

* eth/protocols/snap: fix comment

Co-authored-by: Martin Holst Swende <martin@swende.se>

eth/protocols/snap/sync.go

@@ -21,10 +21,12 @@ import (
 	"encoding/json"
 	"errors"
 	"fmt"
+	gomath "math"
 	"math/big"
 	"math/rand"
 	"sort"
 	"sync"
+	"sync/atomic"
 	"time"
 
 	"github.com/ethereum/go-ethereum/common"
@@ -78,6 +80,29 @@ const (
 	// and waste round trip times. If it's too high, we're capping responses and
 	// waste bandwidth.
 	maxTrieRequestCount = maxRequestSize / 512
+
+	// trienodeHealRateMeasurementImpact is the impact a single measurement has on
+	// the local node's trienode processing capacity. A value closer to 0 reacts
+	// slower to sudden changes, but it is also more stable against temporary hiccups.
+	trienodeHealRateMeasurementImpact = 0.005
+
+	// minTrienodeHealThrottle is the minimum divisor for throttling trie node
+	// heal requests to avoid overloading the local node and exessively expanding
+	// the state trie bedth wise.
+	minTrienodeHealThrottle = 1
+
+	// maxTrienodeHealThrottle is the maximum divisor for throttling trie node
+	// heal requests to avoid overloading the local node and exessively expanding
+	// the state trie bedth wise.
+	maxTrienodeHealThrottle = maxTrieRequestCount
+
+	// trienodeHealThrottleIncrease is the multiplier for the throttle when the
+	// rate of arriving data is higher than the rate of processing it.
+	trienodeHealThrottleIncrease = 1.33
+
+	// trienodeHealThrottleDecrease is the divisor for the throttle when the
+	// rate of arriving data is lower than the rate of processing it.
+	trienodeHealThrottleDecrease = 1.25
 )
 
 var (
@@ -431,6 +456,11 @@ type Syncer struct {
 	trienodeHealReqs map[uint64]*trienodeHealRequest // Trie node requests currently running
 	bytecodeHealReqs map[uint64]*bytecodeHealRequest // Bytecode requests currently running
 
+	trienodeHealRate      float64   // Average heal rate for processing trie node data
+	trienodeHealPend      uint64    // Number of trie nodes currently pending for processing
+	trienodeHealThrottle  float64   // Divisor for throttling the amount of trienode heal data requested
+	trienodeHealThrottled time.Time // Timestamp the last time the throttle was updated
+
 	trienodeHealSynced uint64             // Number of state trie nodes downloaded
 	trienodeHealBytes  common.StorageSize // Number of state trie bytes persisted to disk
 	trienodeHealDups   uint64             // Number of state trie nodes already processed
@@ -476,9 +506,10 @@ func NewSyncer(db ethdb.KeyValueStore) *Syncer {
 		trienodeHealIdlers: make(map[string]struct{}),
 		bytecodeHealIdlers: make(map[string]struct{}),
 
-		trienodeHealReqs: make(map[uint64]*trienodeHealRequest),
-		bytecodeHealReqs: make(map[uint64]*bytecodeHealRequest),
-		stateWriter:      db.NewBatch(),
+		trienodeHealReqs:     make(map[uint64]*trienodeHealRequest),
+		bytecodeHealReqs:     make(map[uint64]*bytecodeHealRequest),
+		trienodeHealThrottle: maxTrienodeHealThrottle, // Tune downward instead of insta-filling with junk
+		stateWriter:          db.NewBatch(),
 
 		extProgress: new(SyncProgress),
 	}
@@ -1321,6 +1352,10 @@ func (s *Syncer) assignTrienodeHealTasks(success chan *trienodeHealResponse, fai
 		if cap > maxTrieRequestCount {
 			cap = maxTrieRequestCount
 		}
+		cap = int(float64(cap) / s.trienodeHealThrottle)
+		if cap <= 0 {
+			cap = 1
+		}
 		var (
 			hashes   = make([]common.Hash, 0, cap)
 			paths    = make([]string, 0, cap)
@@ -2090,6 +2125,10 @@ func (s *Syncer) processStorageResponse(res *storageResponse) {
 // processTrienodeHealResponse integrates an already validated trienode response
 // into the healer tasks.
 func (s *Syncer) processTrienodeHealResponse(res *trienodeHealResponse) {
+	var (
+		start = time.Now()
+		fills int
+	)
 	for i, hash := range res.hashes {
 		node := res.nodes[i]
 
@@ -2098,6 +2137,8 @@ func (s *Syncer) processTrienodeHealResponse(res *trienodeHealResponse) {
 			res.task.trieTasks[res.paths[i]] = res.hashes[i]
 			continue
 		}
+		fills++
+
 		// Push the trie node into the state syncer
 		s.trienodeHealSynced++
 		s.trienodeHealBytes += common.StorageSize(len(node))
@@ -2121,6 +2162,50 @@ func (s *Syncer) processTrienodeHealResponse(res *trienodeHealResponse) {
 		log.Crit("Failed to persist healing data", "err", err)
 	}
 	log.Debug("Persisted set of healing data", "type", "trienodes", "bytes", common.StorageSize(batch.ValueSize()))
+
+	// Calculate the processing rate of one filled trie node
+	rate := float64(fills) / (float64(time.Since(start)) / float64(time.Second))
+
+	// Update the currently measured trienode queueing and processing throughput.
+	//
+	// The processing rate needs to be updated uniformly independent if we've
+	// processed 1x100 trie nodes or 100x1 to keep the rate consistent even in
+	// the face of varying network packets. As such, we cannot just measure the
+	// time it took to process N trie nodes and update once, we need one update
+	// per trie node.
+	//
+	// Naively, that would be:
+	//
+	//   for i:=0; i<fills; i++ {
+	//     healRate = (1-measurementImpact)*oldRate + measurementImpact*newRate
+	//   }
+	//
+	// Essentially, a recursive expansion of HR = (1-MI)*HR + MI*NR.
+	//
+	// We can expand that formula for the Nth item as:
+	//   HR(N) = (1-MI)^N*OR + (1-MI)^(N-1)*MI*NR + (1-MI)^(N-2)*MI*NR + ... + (1-MI)^0*MI*NR
+	//
+	// The above is a geometric sequence that can be summed to:
+	//   HR(N) = (1-MI)^N*(OR-NR) + NR
+	s.trienodeHealRate = gomath.Pow(1-trienodeHealRateMeasurementImpact, float64(fills))*(s.trienodeHealRate-rate) + rate
+
+	pending := atomic.LoadUint64(&s.trienodeHealPend)
+	if time.Since(s.trienodeHealThrottled) > time.Second {
+		// Periodically adjust the trie node throttler
+		if float64(pending) > 2*s.trienodeHealRate {
+			s.trienodeHealThrottle *= trienodeHealThrottleIncrease
+		} else {
+			s.trienodeHealThrottle /= trienodeHealThrottleDecrease
+		}
+		if s.trienodeHealThrottle > maxTrienodeHealThrottle {
+			s.trienodeHealThrottle = maxTrienodeHealThrottle
+		} else if s.trienodeHealThrottle < minTrienodeHealThrottle {
+			s.trienodeHealThrottle = minTrienodeHealThrottle
+		}
+		s.trienodeHealThrottled = time.Now()
+
+		log.Debug("Updated trie node heal throttler", "rate", s.trienodeHealRate, "pending", pending, "throttle", s.trienodeHealThrottle)
+	}
 }
 
 // processBytecodeHealResponse integrates an already validated bytecode response
@@ -2655,10 +2740,12 @@ func (s *Syncer) OnTrieNodes(peer SyncPeer, id uint64, trienodes [][]byte) error
 
 	// Cross reference the requested trienodes with the response to find gaps
 	// that the serving node is missing
-	hasher := sha3.NewLegacyKeccak256().(crypto.KeccakState)
-	hash := make([]byte, 32)
-
-	nodes := make([][]byte, len(req.hashes))
+	var (
+		hasher = sha3.NewLegacyKeccak256().(crypto.KeccakState)
+		hash   = make([]byte, 32)
+		nodes  = make([][]byte, len(req.hashes))
+		fills  uint64
+	)
 	for i, j := 0, 0; i < len(trienodes); i++ {
 		// Find the next hash that we've been served, leaving misses with nils
 		hasher.Reset()
@@ -2670,16 +2757,22 @@ func (s *Syncer) OnTrieNodes(peer SyncPeer, id uint64, trienodes [][]byte) error
 		}
 		if j < len(req.hashes) {
 			nodes[j] = trienodes[i]
+			fills++
 			j++
 			continue
 		}
 		// We've either ran out of hashes, or got unrequested data
 		logger.Warn("Unexpected healing trienodes", "count", len(trienodes)-i)
+
 		// Signal this request as failed, and ready for rescheduling
 		s.scheduleRevertTrienodeHealRequest(req)
 		return errors.New("unexpected healing trienode")
 	}
 	// Response validated, send it to the scheduler for filling
+	atomic.AddUint64(&s.trienodeHealPend, fills)
+	defer func() {
+		atomic.AddUint64(&s.trienodeHealPend, ^(fills - 1))
+	}()
 	response := &trienodeHealResponse{
 		paths:  req.paths,
 		task:   req.task,