Version 0.8.28

Introducing the newest version of the Solidity Compiler!

We are excited to announce the release of the Solidity Compiler Solidity v0.8.28. This is going to be a fairly small release compared to the last one - but an important nonetheless, as we're finally releasing high level language support for transient storage, although at this time, only transient storage state variables of value types are supported. We will of course be working on bringing full support (reference types) in the upcoming releases.

Changelog

Language Features:

• Transient storage state variables of value types are now fully supported.

Compiler Features:

• General: Generate JSON representations of Yul ASTs only on demand to reduce memory usage.
• Standard JSON Interface: Bytecode or IR can now be requested for a subset of all contracts without triggering unnecessary code generation for other contracts.

Bugfixes:

• SMTChecker: Fix SMT logic error when assigning to an array of addresses.
• Yul AST: Fix shifted native source locations when debug info selection included code snippets.

Build system:

• Removed USE_LD_GOLD option and default to use the compiler default linker. For custom linkers, CMAKE_CXX_FLAGS can be used.

We would especially like to thank all the contributors that made this release possible:
Alexander Arlt, Anandu Raveendran, backbonexe, clonker, Daniel Kirchner, Elias Rad, Franco Victorio, Kamil Śliwak, Martin Blicha, Matheus Aguiar, Nikola Matić, Pawel Gebal, r0qs, rodiazet, Vishwa Mehta

Version 0.8.27

Introducing the newest version of the Solidity Compiler!

We are excited to announce the release of the Solidity Compiler Solidity v0.8.27. We've got some exciting new features this time around as well - likely the most anticipated being the support for require with custom errors in the legacy pipeline, which was previously only supported with via IR. On the topic of via IR, we have also made some efficiency improvements with regards to compilation times, namely the caching of already optimized IR, and the re-use thereof. Apart from these, we've also fixed quite a few bugs, added some minor convenience features, and are continuing our work on high-level transient storage support.

Changelog

Language Features:

• Accept declarations of state variables with transient data location (parser support only, no code generation yet).
• Make require(bool, Error) available when using the legacy pipeline.
• Yul: Parsing rules for source location comments have been relaxed: Whitespace between the location components as well as single-quoted code snippets are now allowed.

Compiler Features:

• Commandline Interface: Add --transient-storage-layout output.
• Commandline Interface: Allow the use of --asm-json output option in assembler mode to export EVM assembly of the contracts in JSON format.
• Commandline Interface: Do not perform IR optimization when only unoptimized IR is requested.
• Constant Optimizer: Uses PUSH0 if supported by the selected evm version.
• Error Reporting: Unimplemented features are now properly reported as errors instead of being handled as if they were bugs.
• EVM: Support for the EVM version "Prague".
• Peephole Optimizer: PUSH0, when supported, is duplicated explicitly instead of using DUP1.
• Peephole Optimizer: Remove identical code snippets that terminate the control flow if they occur one after another.
• SMTChecker: Add CHC engine check for underflow and overflow in unary minus operation.
• SMTChecker: Replace CVC4 as a possible BMC backend with cvc5.
• Standard JSON Interface: Add transientStorageLayout output.
• Standard JSON Interface: Do not perform IR optimization when only unoptimized IR is requested.
• Yul: Drop the deprecated typed Yul dialect that was only accessible via --yul in the CLI.
• Yul: The presence of types in untyped Yul dialects is now a parser error.
• Yul Optimizer: Caching of optimized IR to speed up optimization of contracts with bytecode dependencies.
• Yul Optimizer: The optimizer now treats some previously unrecognized identical literals as identical.

Bugfixes:

• Assembler: Fix ICE caused by imprecise calculation of required size of tags in bytecode when code size is above 255.
• Parser: Fix spuriously emitted parser error for unary plus operations when used as binary operator in some cases.
• SMTChecker: Fix error that reports invalid number of verified checks for BMC and CHC engines.
• SMTChecker: Fix formatting of unary minus expressions in invariants.
• SMTChecker: Fix internal compiler error when reporting proved targets for BMC engine.
• SMTChecker: Fix SMT logic error when assigning to an array of contracts or functions.
• Standard JSON Interface: For Yul input, properly produce output artifacts in case of warnings.
• TypeChecker: Fix segfault when assigning nested tuple to tuple.
• Yul IR Code Generation: Deterministic order of Yul subobjects.
• Yul Optimizer: Fix Yul source locations always referring to unoptimized source, even in optimized outputs.
• Yul Optimizer: Fix warnings being generated twice when there are no errors.
• Yul Optimizer: Name simplification could lead to forbidden identifiers with a leading and/or trailing dot, e.g., x._ would get simplified into x..
• Yul Parser: Fix segfault when parsing very long location comments.

Build System:

• Change build system to use git submodules for some dependencies (nlohmann-json, fmtlib & range-v3).

We especially thank all the contributors that made this release possible:
Alex Beregszaszi, Alexander Arlt, Alireza Arjmand, Ardis Lu, Bhargava Shastry, Daniel Kirchner, Daniel Zahariev, Francisco Giordano, Guilherme Ferreira, Haoyang Ma, Howe, Ikko Eltociear Ashimine, Kaan Uzdoğan, Kamil Śliwak, Martin Blicha, Matheus Aguiar, Meet Mangukiya, Moritz Hoffmann, Nikola Matić, Pawel Gebal, Tilak Madichetti, ToonVanHove, Vishwa Mehta, Zuri Obozuwa, dxo, ljmanini, r0qs, rodiazet, shafu, snoppy

Version 0.8.26

Introducing the newest version of the Solidity Compiler!

We are excited to announce the release of the Solidity Compiler Solidity v0.8.26. This release brings some exciting new features, namely a much faster default optimizer sequence for the via IR pipeline, which cuts the compilation times significantly. We are introducing usage of require functions with custom errors, at this time for the via IR pipeline only, in addition to an optimization for reverting with errors of small static encoding sizes, which should now have lower gas costs. As always, there are multiple small bugfixes to go with the release.

Changelog

Language Features:

• Introduce a new overload require(bool, Error) that allows usage of require functions with custom errors. This feature is available in the via-ir pipeline only.

Compiler Features:

• SMTChecker: Create balance check verification target for CHC engine.
• Yul IR Code Generation: Cheaper code for reverting with errors of a small static encoding size.
• Yul Optimizer: New, faster default optimizer step sequence.

Bugfixes:

• Commandline Interface: Fix ICE when the optimizer is disabled and an empty/blank string is used for --yul-optimizations sequence.
• SMTChecker: Fix false positive when comparing hashes of same array or string literals.
• SMTChecker: Fix internal error on mapping access caused by too strong requirements on sort compatibility of the index and mapping domain.
• SMTChecker: Fix internal error when using an empty tuple in a conditional operator.
• SMTChecker: Fix internal error when using bitwise operators with an array element as argument.
• Standard JSON Interface: Fix ICE when the optimizer is disabled and an empty/blank string is used for optimizerSteps sequence.
• StaticAnalyzer: Only raise a compile time error for division and modulo by zero when it's between literals.
• TypeChecker: Fix compiler crash when the left-hand side of an assignment was a parenthesized non-tuple expression of a tuple type.
• Yul Optimizer: Fix optimizer executing each repeating part of the step sequence at least twice, even if the code size already became stable after the first iteration.
• Yul Optimizer: Fix the order of assignments generated by SSATransform being dependent on AST IDs, sometimes resulting in different (but equivalent) bytecode when unrelated files were added to the compilation pipeline.

Build System:

• Replace internal JSON library jsoncpp with nlohmann::json.

We especially thank all the contributors that made this release possible:
Alex Beregszaszi, Alexander Arlt, Ardis Lu, Daniel Kirchner, InventiveCoder, Juliano Penna, Kamil Śliwak, Martin Blicha, Matheus Aguiar, Moritz Hoffmann, Nikola Matić, Patrick Collins, Pawel Gebal, Snoppy, Tamas Molnar, Vc, Vijay Raj Panchal, Zuri Obozuwa, edurivara, hanghuge, hydai, looklose, pcw109550, r0qs, wilsoncusack, zo9999

Version 0.8.25

Introducing the newest version of the Solidity Compiler!

We are excited to announce the release of the Solidity Compiler Solidity v0.8.25. This release is a small one, and is mainly centered around the Dencun hard-fork that occurred yesterday. On that note, the default EVM version in the compiler is now cancun, and we've also introduced some gas savings via better exploitation of the MCOPY opcode, as well fixing an issue that could result in larger than necessary bytecode.

Changelog

Compiler Features:

• Code Generator: Use MCOPY instead of MLOAD/MSTORE loop when copying byte arrays.
• EVM: Set default EVM version to cancun.
• Yul Analyzer: Emit transient storage warning only for the first occurrence of tstore.

Bugfixes:

• Assembler: Prevent incorrect calculation of tag sizes.
• Commandline Interface: Do not run IR pipeline when --via-ir is used but no output that depends on the IR is requested.
• EVM Assembly Import: Fix handling of missing source locations during import.
• SMTChecker: Ensure query is properly flushed to a file before calling solver when using SMT-LIB interface.
• SMTChecker: Fix internal error caused by not respecting the sign of an integer type when constructing zero-value SMT expressions.
• SMTChecker: Run Eldarica only when explicitly requested with --model-checker-solvers eld, even when it is present on the system.

We especially thank all the contributors that made this release possible:
Aditya Kode, Alexander Arlt, Bhargava Shastry, ByeongSu Go, Chomtana, Cyrus, Daniel Kirchner, Dimitris Apostolou, Jeason, Kamil Śliwak, Martin Blicha, Matheus Aguiar, Nikola Matić, Saw-mon & Natalie, Simon Perriard, Twice, Vishwa Mehta, Vojtch, minaminao, omahs, pgebal, r0qs, racerol

UPDATE 2024-03-14: The MacOS universal binary originally included here has been rebuilt and replaced due to a missing signature which made it unusable.

The SHA-256 hash of the old binary was ce09577e654628c2b4d00e66bcab7c8a4dc18c1d9812dcbab7bd8572a6d4d27e. The new one is cc3f94a70ac681b0304084acc1980aabe2a1bb3240d44ce76a8df0e1e77a2110.

Version 0.8.24

Introducing the newest version of the Solidity Compiler!

We are excited to announce the release of the Solidity Compiler Solidity v0.8.24. This newest version of the compiler brings readiness for the "Cancun" network upgrade, including support for transient storage (EIP-1153), shard blob transactions (EIP-4844), & more. The release binaries for macOS are now also compatible with Apple Silicon chips.

Notable Features

• Support for transient storage for inline assembly (EIP-1153)
• Support for BLOBBASEFEE (EIP-7516)
• Support for MCOPY (EIP-5656)
• Changes in SELFDESTRUCT Behavior (EIP-6780)
• Support for Apple Silicon

Changelog

Language Features

• Introduce global block.blobbasefee for retrieving the blob base fee of the current block.
• Introduce global function blobhash(uint) for retrieving versioned hashes of blobs, akin to the homonymous Yul builtin.
• Yul: Introduce builtin blobbasefee() for retrieving the blob base fee of the current block.
• Yul: Introduce builtin blobhash() for retrieving versioned hashes of blobs associated with the transaction.
• Yul: Introduce builtin mcopy() for cheaply copying data between memory areas.
• Yul: Introduce builtins tload() and tstore() for transient storage access.

Compiler Features

• EVM: Support for the EVM Version "Cancun".
• SMTChecker: Support bytes.concat except when string literals are passed as arguments.
• Standard JSON Interface: Add experimental support to import EVM assembly in the format used by --asm-json.
• TypeChecker: Comparison of internal function pointers now yields a warning, as it can produce unexpected results with the legacy pipeline enabled.

Bugfixes:

• AST import: Fix bug when importing inline assembly with empty let variable declaration.

We especially thank all the contributors that made this release possible:
Alexander Arlt, Bhargava Shastry, Daniel Kirchner, GoodDaisy, Jitendra Kumar, Kamil Śliwak, Matheus Aguiar, Nikola Matić, Qi He, Sukey, Vishwa Mehta, pgebal, r0qs, xiaolou86.

Version 0.8.23

Introducing the newest version of the Solidity Compiler!
We are excited to announce the latest release of the Solidity Compiler, Solidity v0.8.23.

Changelog

Important Bugfixes:

• Optimizer: Fix block deduplicator bug which led to blocks which are identical apart from the contents of verbatim instructions to be treated as equivalent and thus collapsed into a single one.

Compiler Features:

• Commandline Interface: An empty --yul-optimizations sequence can now be always provided.
• Standard JSON Interface: An empty optimizerSteps sequence can now always be provided.

We especially thank all the contributors that made this release possible:
Daniel Kirchner, Kamil Śliwak, Markus Osterlund / robriks, Matheus Aguiar, Nikola Matić, Nuzair

Version 0.8.22

Introducing the newest version of the Solidity Compiler!
We are excited to announce the latest release of the Solidity Compiler, Solidity v0.8.22.

IMPORTANT NOTE:
This release deprecates support for EVM versions older than Constantinople for the reason of ruling out the need to maintain multiple complex code paths or workarounds for ancient EVM versions. In case you rely on the support for such EVM versions, please reach out to us.

Notable Features:

• Unchecked loop increments
• Adding support for importing EVM Assembly JSON (experimental)
• Adjusting Yul optimizer to rematerialize zero literals

Changelog

Language Features:

• Allow defining events at file level.

Compiler Features:

• Code Generator: Remove redundant overflow checks of certain for loops when the counter variable cannot overflow.
• Commandline Interface: Add --no-import-callback option that prevents the compiler from loading source files not given explicitly on the CLI or in Standard JSON input.
• Commandline Interface: Add an experimental --import-asm-json option that can import EVM assembly in the format used by --asm-json.
• Commandline Interface: Use proper severity and coloring also for error messages produced outside of the compilation pipeline.
• EVM: Deprecate support for "homestead", "tangerineWhistle", "spuriousDragon" and "byzantium" EVM versions.
• Parser: Remove the experimental error recovery mode (--error-recovery / settings.parserErrorRecovery).
• SMTChecker: Support user-defined operators.
• Yul Optimizer: If PUSH0 is supported, favor zero literals over storing zero values in variables.
• Yul Optimizer: Run the Rematerializer and UnusedPruner steps at the end of the default clean-up sequence.

Bugfixes:

• Code Generator: Fix output from via-IR code generator being dependent on which files were discovered by import callback. In some cases, a different AST ID assignment would alter the order of functions in internal dispatch, resulting in superficially different but semantically equivalent bytecode.
• NatSpec: Fix internal error when requesting userdoc or devdoc for a contract that emits an event defined in a foreign contract or interface.
• SMTChecker: Fix encoding error that causes loops to unroll after completion.
• SMTChecker: Fix inconsistency on constant condition checks when while or for loops are unrolled before the condition check.
• Yul Optimizer: Fix replacement decisions during CSE being affected by Yul variable names generated by the compiler, resulting in different (but equivalent) bytecode in some situations.

AST Changes:

• AST: Fix wrong initial ID for Yul nodes in the AST.

We especially thank all the contributors that made this release possible:
Alejandro Criado-Pérez, Alexander Arlt, Bhargava Shastry, Daniel, Jun Zhang, Kamil Śliwak, Leo, Martin Blicha, Matheus Aguiar, Nikola Matić, Paul Wackerow, Pawel Gebal, Saw-mon & Natalie, Zach Obront, franzihei, omahs, pgebal, r0qs, shalaamum

Version 0.8.21

Introducing the newest version of the Solidity Compiler!
We are excited to announce the latest release of the Solidity Compiler, Solidity v0.8.21.

Changelog

Important Bugfixes:

• Code Generator: Always generate code for the expression in <expression>.selector in the legacy code generation pipeline.
• Yul Optimizer: Fix FullInliner step (i) not preserving the evaluation order of arguments passed into inlined functions in code that is not in expression-split form (i.e. when using a custom optimizer sequence in which the step not preceded by ExpressionSplitter (x)).

Language Features:

• Allow qualified access to events from other contracts.
• Relax restrictions on initialization of immutable variables. Reads and writes may now happen at any point at construction time outside of functions and modifiers. Explicit initialization is no longer mandatory.

Compiler Features:

• Commandline Interface: Add --ast-compact-json output in assembler mode.
• Commandline Interface: Add --ir-ast-json and --ir-optimized-ast-json outputs for Solidity input, providing AST in compact JSON format for IR and optimized IR.
• Commandline Interface: Respect --optimize-yul and --no-optimize-yul in compiler mode and accept them in assembler mode as well. --optimize --no-optimize-yul combination now allows enabling EVM assembly optimizer without enabling Yul optimizer.
• EWasm: Remove EWasm backend.
• Parser: Introduce pragma experimental solidity, which will enable an experimental language mode that, in particular, has no stability guarantees between non-breaking releases and is not suited for production use.
• SMTChecker: Add --model-checker-print-query CLI option and settings.modelChecker.printQuery JSON option to output the SMTChecker queries in the SMTLIB2 format. This requires using smtlib2 solver only.
• Standard JSON Interface: Add ast file-level output for Yul input.
• Standard JSON Interface: Add irAst and irOptimizedAst contract-level outputs for Solidity input, providing AST in compact JSON format for IR and optimized IR.
• Yul Optimizer: Remove experimental ReasoningBasedSimplifier optimization step.
• Yul Optimizer: Stack-to-memory mover is now enabled by default whenever possible for via IR code generation and pure Yul compilation.

Bugfixes:

• Code Generator: Disallow complex expressions whose results are types, built-ins, modules or some unassignable functions. The legacy code generation pipeline would not actually evaluate them, discarding any side effects they might have.
• Code Generator: Fix not entirely deterministic order of functions in unoptimized Yul output. The choice of C++ compiler in some cases would result in different (but equivalent) bytecode (especially from native binaries vs emscripten binaries).
• Commandline Interface: Fix internal error when using --stop-after parsing and requesting some of the outputs that require full analysis or compilation.
• Commandline Interface: It is no longer possible to specify both --optimize-yul and --no-optimize-yul at the same time.
• SMTChecker: Fix encoding of side-effects inside if and ternary conditionalstatements in the BMC engine.
• SMTChecker: Fix false negative when a verification target can be violated only by a trusted external call from another public function.
• SMTChecker: Fix generation of invalid SMT-LIB2 scripts in BMC engine with trusted mode for external calls when CHC engine times out.
• SMTChecker: Fix internal error caused by incorrectly classifying external function call using function pointer as a public getter.
• SMTChecker: Fix internal error caused by using external identifier to encode member access to functions that take an internal function as a parameter.
• Standard JSON Interface: Fix an incomplete AST being returned when analysis is interrupted by certain kinds of fatal errors.
• Type Checker: Disallow using certain unassignable function types in complex expressions.
• Type Checker: Function declaration types referring to different declarations are no longer convertible to each other.
• Yul Optimizer: Ensure that the assignment of memory slots for variables moved to memory does not depend on AST IDs that may depend on whether additional files are included during compilation.
• Yul Optimizer: Fix FullInliner step not ignoring code that is not in expression-split form.
• Yul Optimizer: Fix optimized IR being unnecessarily passed through the Yul optimizer again before bytecode generation.

AST Changes:

• AST: Add the experimentalSolidity field to the SourceUnit nodes, which indicates whether the experimental parsing mode has been enabled via pragma experimental solidity.

We especially thank all the contributors that made this release possible:

Alejandro Criado-Pérez, Alexander Arlt, Alexandre Ferreira, Bhargava Shastry, Cliff Syner, Daniel Kirchner, David Bar-On, GiokaMarkella, Jun Zhang, Kaan Uzdoğan, Kamil Śliwak, Leo Alt, Martin Blicha, Matheus Aguiar, Nikola Matić, Nuno Santos, Paul Wackerow, Pawel Gebal, johnnygee19, minaminao, r0qs

Version 0.8.20

Introducing the newest version of the Solidity Compiler!
We are excited to announce the latest release of the Solidity Compiler, Solidity v0.8.20.
This latest version includes a range of improvements and, most importantly, support for Shanghai!
It also contains performance improvements in the via-IR pipeline and improves the list of events exposed in the contract ABI.

IMPORTANT NOTE: This compiler switches the default target EVM version to Shanghai, which means that the generated bytecode will include PUSH0 opcodes. Be sure to select the appropriate EVM version in case you intend to deploy on a chain other than mainnet like L2 chains that may not yet support PUSH0, otherwise deployment of your contracts will fail.

Changelog

Compiler Features:

• Assembler: Use push0 for placing 0 on the stack for EVM versions starting from "Shanghai". This decreases the deployment and runtime costs.
• EVM: Set default EVM version to "Shanghai".
• EVM: Support for the EVM Version "Shanghai".
• NatSpec: Add support for NatSpec documentation in enum definitions.
• NatSpec: Add support for NatSpec documentation in struct definitions.
• NatSpec: Include NatSpec from events that are emitted by a contract but defined outside of it in userdoc and devdoc output.
• Optimizer: Re-implement simplified version of UnusedAssignEliminator and UnusedStoreEliminator. It can correctly remove some unused assignments in deeply nested loops that were ignored by the old version.
• Parser: Unary plus is no longer recognized as a unary operator in the AST and triggers an error at the parsing stage (rather than later during the analysis).
• SMTChecker: Group all messages about unsupported language features in a single warning. The CLI option --model-checker-show-unsupported and the JSON option settings.modelChecker.showUnsupported can be enabled to show the full list.
• SMTChecker: Properties that are proved safe are now reported explicitly at the end of analysis. By default, only the number of safe properties is shown. The CLI option --model-checker-show-proved-safe and the JSON option settings.modelChecker.showProvedSafe can be enabled to show the full list of safe properties.
• Standard JSON Interface: Add experimental support for importing ASTs via Standard JSON.
• Yul EVM Code Transform: If available, use push0 instead of codesize to produce an arbitrary value on stack in order to create equal stack heights between branches.

Bugfixes:

• ABI: Include events in the ABI that are emitted by a contract but defined outside of it.
• Immutables: Disallow initialization of immutables in try/catch statements.
• SMTChecker: Fix false positives in ternary operators that contain verification targets in its branches, directly or indirectly.

AST Changes:

• AST: Add the internalFunctionIDs field to the AST nodes of contracts containing IDs of functions that may be called via the internal dispatch. The field is a map from function AST IDs to internal dispatch function IDs. These IDs are always generated, but they are only used in via-IR code generation.
• AST: Add the usedEvents field to ContractDefinition which contains the AST IDs of all events emitted by the contract as well as all events defined and inherited by the contract.

We especially thank all the contributors that made this release possible:

Alexander Arlt, Alex Beregszaszi, Bhargava Shastry, chriseth, Christian Parpart, Daniel Kirchner, Francois-Rene Rideau, hrkrshnn, Kaan Uzdoğan, Kamil Śliwak, Leo Alt, Matheus Aguiar, Michael de Hoog, minaminao, mmqxyz, Nikola Matic, Nuno Santos, Ojas Aklecha, Peter Lemenkov, Rodrigo Q. Saramago, uji, Vaibhaw

If you want to perform a source build, please only use solidity_0.8.20.tar.gz and not the source archives generated automatically by GitHub.

Version 0.8.19

Introducing the newest version of the Solidity Compiler!
We are excited to announce the latest release of the Solidity Compiler, Solidity v0.8.19.
This latest version includes a range of improvements and, most importantly, custom operators for user-defined value types language feature!
It also contains a fix for a long-standing bug that can result in code that is only used in creation code to also be included in runtime bytecode.

Changelog

Language Features:

• Allow defining custom operators for user-defined value types via using {f as +} for T global syntax.

Compiler Features:

• SMTChecker: New trusted mode that assumes that any compile-time available code is the actual used code, even in external calls. This can be used via the CLI option --model-checker-ext-calls trusted or the JSON field settings.modelChecker.extCalls: "trusted".

Bugfixes:

• Assembler: Avoid duplicating subassembly bytecode where possible.
• Code Generator: Avoid including references to the deployed label of referenced functions if they are called right away.
• ContractLevelChecker: Properly distinguish the case of missing base constructor arguments from having an unimplemented base function.
• SMTChecker: Fix internal error caused by unhandled z3 expressions that come from the solver when bitwise operators are used.
• SMTChecker: Fix internal error when using the custom NatSpec annotation to abstract free functions.
• TypeChecker: Also allow external library functions in using for.

AST Changes:

• AST: Add function field to UnaryOperation and BinaryOperation AST nodes. functionList in UsingForDirective AST nodes will now contain operator and definition members instead of function when the list entry defines an operator.

We especially thank all the contributors that made this release possible:

Bhargava Shastry, Daniel Kirchner, Evan Saulpaugh, Jacob Heider, Kamil Śliwak, Leo Alt, Matheus Aguiar, Michał Janiszewski, Nicolás Acosta, Nikola Matić, Nuno Santos, Pawel Gebal, Peter Lemenkov, Rodrigo Q. Saramago, William Entriken, Zachinquarantine, chriseth, drblessing, minaminao, wechman

If you want to perform a source build, please only use solidity_0.8.19.tar.gz and not the source archives generated automatically by GitHub.