[EN] Initial Configuration

1. By default a server is created for protocol H02 (Sinotrack) on port 8091. If you wish you can customize this configuration in Servers > List.
2. In Servers > Status, we select the server we just created and press the Start/Restart button.
3. The server should appear started in the upper listing of Servers > Status.
4. If the server does not start, we can check the logs generated in the laravel folder from the Servers > Logs menu.
5. Now we can create a vehicle in Vehicles > Create. We fill in the necessary fields and save it.
6. Once we have a vehicle, we go to create a device from Devices > List > Create. It is important to correctly indicate the Serial Number as it is the identifier that the device will send to the server and by which it can be recognized. We associate it with the vehicle we just created and save.
7. From here, we only have to wait to receive the first connections from the device to generate the first trips.
8. To configure the connection to our server for a Sinotrack device, follow the steps below.
9. If you have problems receiving the connection from the device you can go to Servers > List > Edit and enable debug mode. Once the change is saved remember to restart the server in Servers > Status.