AS3935 Lightning Detector

README.md

@@ -31,23 +31,24 @@ Hardware support is provided by specific GPIO, Sensor and Stream modules. It's e
 ### Sensors
 
   - ADS1x15 analog to digital converters (`ads1x15`)
+  - ADXl345 3-axis accelerometer up to ±16g  (`adxl345`)
   - AHT20 temperature and humidity sensor (`aht20`)
+  - AS3935 lightning detector (`as3935`)
   - BH1750 light level sensor (`bh1750`)
   - BME280 temperature, humidity and pressure sensor (`bme280`)
   - BME680 temperature, humidity and pressure sensor (`bme680`)
   - DHT11/DHT22/AM2302 temperature and humidity sensors (`dht22`)
   - DS18S20/DS1822/DS18B20/DS1825/DS28EA00/MAX31850K temperature sensors (`ds18b`)
   - ENS160  digital multi-gas sensor with multiple IAQ data (TVOC, eCO2, AQI) (`ens160`)
-  - FREQUENCYCOUNTER Counts pulses from GPIOs and return the frequency in Hz (`frequencycounterr`)
   - FLOWSENSOR generic flow rate sensor like YF-S201, YF-DN50 or others (`flowsensor`)
+  - FREQUENCYCOUNTER Counts pulses from GPIOs and return the frequency in Hz (`frequencycounterr`)
   - HCSR04 ultrasonic range sensor (connected to the Raspberry Pi on-board GPIO) (`hcsr04`)
   - INA219 DC current sensor (`ina219`)
   - LM75 temperature sensor (`lm75`)
   - MCP3008 analog to digital converter (`mcp3008`)
-  - ADXl345 3-axis accelerometer up to ±16g  (`adxl345`)
   - PMS5003 particulate sensor (`pms5003`)
   - SHT40/SHT41/SHT45 temperature and humidity sensors (`sht4x`)
-  - TLSl2561 light level sensor (`tsl2561`)
+  - TSL2561 light level sensor (`tsl2561`)
   - VEML7700 light level sensor (`veml7700`)
   - YF-S201 flow rate sensor (`yfs201`)
 

mqtt_io/modules/sensor/as3935.py

@@ -0,0 +1,341 @@
+# pylint: disable=line-too-long
+"""
+
+AS3935 Ligntning Sensor
+
+Example configuration:
+
+sensor_modules:
+  - name: AS3935_Sensor
+    module: sensor
+    pin: 17
+    auto_filter: True
+    indoor: True
+
+sensor_inputs:
+  - name: distance
+    module: AS3935_Sensor
+    digits: 4
+    interval: 5
+    type: distance·
+
+Module Options
+--------------
+See also:
+https://www.embeddedadventures.com/datasheets/AS3935_Datasheet_EN_v2.pdf
+https://github.com/fourstix/Sparkfun_CircuitPython_QwiicAS3935/blob/master/sparkfun_qwiicas3935.py
+https://github.com/fourstix/Sparkfun_CircuitPython_QwiicAS3935/blob/master/examples
+
+pin:                 Interrupt GPIO Pin
+auto_filter:         Set noise_level, mask_disturber and watchdog_threshold automatically.
+                     Default: True
+indoor:              Set whether or not the sensor should use an indoor configuration.
+                     Default: True
+lightning_threshold: number of lightning detections required before an
+                     interrupt is raised.
+                     Default: 1
+watchdog_threshold:  This function returns the threshold for events that trigger the IRQ
+                     Pin. Only sensitivity threshold values 1 to 10 allowed.
+                     Default: 2
+spike_rejection:     This setting, like the watchdog threshold, can help determine
+                     between false events and actual lightning. The shape of the spike is
+                     analyzed during the chip's signal validation routine. Increasing this
+                     value increases robustness at the cost of sensitivity to distant
+                     events.
+                     Default: 2
+noise_level:         The noise floor level is compared to a known reference voltage. If
+                     this level is exceeded the chip will issue an interrupt to the IRQ pin,
+                     broadcasting that it can not operate properly due to noise (INT_NH).
+                     Check datasheet for specific noise level tolerances when setting this
+                     register.
+                     Default: 2
+mask_disturber       Setting this True or False will change whether or not disturbers
+                     trigger the IRQ pin.
+                     Default: False
+division_ratio:      The antenna is designed to resonate at 500kHz and so can be tuned
+                     with the following setting. The accuracy of the antenna must be within
+                     3.5 percent of that value for proper signal validation and distance
+                     estimation. The division ratio can only be set to 16, 32, 64 or 128.
+                     Default: 16
+tun_cap:             This setting will add capacitance to the series RLC antenna on the
+                     product. It's possible to add 0-120pF in steps of  8pF to the antenna.
+                     The Tuning Cap value will be set between 0 and 120pF, in steps of 8pF.
+                     If necessary, the input value is rounded down to the nearest 8pF.
+                     Default: 0
+
+Sensor Options
+--------------
+
+type:                The following types are supported:
+                     last:      last lightning in unix timestamp format
+                     distance:  distance of last lightning in km
+                     energy:    energy of last lightning (no unit, no physical meaning)
+                     number:    number of lightning events since start
+
+"""
+
+from typing import cast
+from ...types import CerberusSchemaType, ConfigType, SensorValueType
+from . import GenericSensor
+import logging
+
+_LOG = logging.getLogger(__name__)
+
+REQUIREMENTS = ("gpiozero","sparkfun_qwiicas3935")
+
+CONFIG_SCHEMA: CerberusSchemaType = {
+    "pin": {
+        "type": 'integer',
+        "required": True,
+        "empty": False
+    },
+    "lightning_threshold": {
+        "type": 'integer',
+        "required": False,
+        "empty": False,
+        "allowed": [1, 5, 9, 16],
+        "default": 1,
+    },
+    "watchdog_threshold": {
+        "type": 'integer',
+        "required": False,
+        "empty": False,
+        "min": 1,
+        "max": 10,
+        "default": 2,
+    },
+    "spike_rejection": {
+        "type": 'integer',
+        "required": False,
+        "empty": False,
+        "min": 1,
+        "max": 11,
+        "default": 2,
+    },
+    "noise_level": {
+        "type": 'integer',
+        "required": False,
+        "empty": False,
+        "min": 1,
+        "max": 7,
+        "default": 2,
+    },
+    "mask_disturber": {
+        "type": 'boolean',
+        "required": False,
+        "empty": False,
+        "default": False,
+    },
+    "auto_filter": {
+        "type": 'boolean',
+        "required": False,
+        "empty": False,
+        "default": True,
+    },
+    "indoor": {
+        "type": 'boolean',
+        "required": False,
+        "empty": False,
+        "default": True,
+    },
+    "division_ratio": {
+        "type": 'integer',
+        "required": False,
+        "empty": False,
+        "allowed": [16, 32, 64, 128],
+        "default": 16,
+    },
+    "tune_cap": {
+        "type": 'integer',
+        "required": False,
+        "empty": False,
+        "min": 0,
+        "max": 120,
+        "default": 0,
+    },
+}
+
+
+class FRANKLINSENSOR:
+    """
+    Franklin Sensor class
+    """
+
+    def __init__(self, gpiozero, lightning, name: str, pin: int) -> None:  # type: ignore[no-untyped-def]
+        self.name = name
+        self.pin = gpiozero.DigitalInputDevice(pin)
+        self.pin.when_activated = self.trigger_interrupt
+        self.count = 0
+        self.lightning = lightning
+
+    def trigger_interrupt(self) -> None:
+        """ When the interrupt goes high """
+        # pylint: disable=import-outside-toplevel,attribute-defined-outside-init
+        # pylint: disable=import-error,no-member
+        import time # type: ignore
+        time.sleep(0.05)
+        global data
+        _LOG.debug("as3935: Interrupt called!")
+        interrupt_value = self.lightning.read_interrupt_register()
+        if interrupt_value == self.lightning.NOISE:
+            _LOG.debug("as3935: Noise detected.")
+            if self.lightning.AUTOFILTER is True:
+                self.reduce_noise()
+        elif interrupt_value == self.lightning.DISTURBER:
+            _LOG.debug("as3935: Disturber detected.")
+            if self.lightning.AUTOFILTER is True:
+                self.increase_threshold()
+        elif interrupt_value == self.lightning.LIGHTNING:
+            _LOG.debug("as3935: Lightning strike detected!")
+            _LOG.debug("as3935: Approximately: " + str(self.lightning.distance_to_storm) + "km away!")
+            _LOG.debug("as3935: Energy value: " + str(self.lightning.lightning_energy))
+            number = data["number"] + 1
+            now = time.time()
+            data = {
+                "last": now,
+                "distance": self.lightning.distance_to_storm,
+                "energy": self.lightning.lightning_energy,
+                "number": number
+            }
+
+    def reduce_noise(self) -> None:
+        """ Reduce Noise Level """
+        value = self.lightning.noise_level
+        value += 1
+        if value > 7:
+            _LOG.debug("as3935: Noise floor is at the maximum value 7.")
+            return
+        _LOG.debug("as3935: Increasing the noise event threshold to " + str(value))
+        self.lightning.noise_level = value
+
+    def increase_threshold(self) -> None:
+        """ Increase Watchdog Threshold """
+        value = self.lightning.watchdog_threshold
+        value += 1
+        if value > 10:
+            self.lightning.mask_disturber = True
+            _LOG.debug("as3935: Watchdog threshold is at the maximum value 10. Mask disturbers now.")
+            return
+        _LOG.debug("as3935: Increasing the disturber watchdog threshold to " + str(value))
+        self.lightning.watchdog_threshold = value
+
+class Sensor(GenericSensor):
+    """
+    Flowsensor: Flow Rate Sensor
+    """
+
+    SENSOR_SCHEMA: CerberusSchemaType = {
+        "type": {
+            "type": 'string',
+            "required": False,
+            "empty": False,
+            "allowed": ['last', 'distance', 'energy', 'number'],
+            "default": 'distance',
+        },
+    }
+
+    def setup_module(self) -> None:
+        # pylint: disable=import-outside-toplevel,attribute-defined-outside-init
+        # pylint: disable=import-error,no-member
+        import board  # type: ignore
+        import sparkfun_qwiicas3935 # type: ignore
+        import gpiozero  # type: ignore
+
+        #Create gpio object
+        self.gpiozero = gpiozero
+
+        # Create bus object using our board's I2C port
+        self.i2c = board.I2C()
+
+        # Create as3935 object
+        self.lightning = sparkfun_qwiicas3935.Sparkfun_QwiicAS3935_I2C(self.i2c)
+
+        if self.lightning.connected:
+            _LOG.debug("as3935: Schmow-ZoW, Lightning Detector Ready!")
+        else:
+            _LOG.debug("as3935: Lightning Detector does not appear to be connected. Please check wiring.")
+
+        # Set defaults
+        self.lightning.clear_statistics()
+        self.lightning.reset()
+        self.lightning.watchdog_threshold = 2
+        self.lightning.noise_level = 2
+        self.lightning.mask_disturber = False
+        self.lightning.spike_rejection = 2
+        self.lightning.lightning_threshold = 1
+        self.lightning.division_ratio = 16
+        self.lightning.tune_cap = 0
+        self.lightning.indoor_outdoor = self.lightning.INDOOR
+        self.lightning.mask_disturber = False
+        self.lightning.AUTOFILTER=True # Our own var
+
+        # Auto Filter False-Positives?
+        if 'auto_filter' in self.config:
+            self.lightning.AUTOFILTER=self.config["auto_filter"]
+
+        # Lightning Threashold
+        if 'lightning_threshold' in self.config:
+            self.lightning.lightning_threshold = self.config["lightning_threshold"]
+
+        # Watchdog Threashold
+        if 'watchdog_threshold' in self.config:
+            self.lightning.watchdog_threshold = self.config["watchdog_threshold"]
+
+        # Spike Rejection
+        if 'spike_rejection' in self.config:
+            self.lightning.spike_rejection = self.config["spike_rejection"]
+
+        # Noise Floor / Level
+        if 'noise_level' in self.config:
+            self.lightning.noise_level = self.config["noise_level"]
+
+        # Mask Disturber
+        if 'mask_disturber' in self.config:
+            self.lightning.mask_disturber = self.config["mask_disturber"]
+
+        # Indoor/Outdoor
+        if 'indoor' in self.config:
+            if self.config["indoor"] is True:
+                self.lightning.indoor_outdoor = self.lightning.INDOOR
+            else:
+                self.lightning.indoor_outdoor = self.lightning.OUTDOOR
+
+        # Division Ratio
+        if 'division_ratio' in self.config:
+            self.lightning.division_ratio = self.config["division_ratio"]
+
+        # Tune Cap
+        if 'tune_cap' in self.config:
+            self.lightning.tune_cap = self.config["tune_cap"]
+
+        # Debug
+        _LOG.debug("as3935: The noise floor is " + str(self.lightning.noise_level))
+        _LOG.debug("as3935: The disturber watchdog threshold is " + str(self.lightning.watchdog_threshold))
+        _LOG.debug("as3935: The Lightning Detectori's Indoor/Outdoor mode is set to: " + str(self.lightning.indoor_outdoor))
+        _LOG.debug("as3935: Are disturbers being masked? " + str(self.lightning.mask_disturber))
+        _LOG.debug("as3935: Spike Rejection is set to: " + str(self.lightning.spike_rejection))
+        _LOG.debug("as3935: Division Ratio is set to: " + str(self.lightning.division_ratio))
+        _LOG.debug("as3935: Internal Capacitor is set to: " + str(self.lightning.tune_cap))
+
+        # Global data
+        global data
+        data = {
+            "last": 0,
+            "distance": 0,
+            "energy": 0,
+            "number": 0
+        }
+
+        # Create sensor
+        sensor = FRANKLINSENSOR(
+            gpiozero=self.gpiozero, lightning=self.lightning, name=self.config["name"], pin=self.config["pin"]
+        )
+
+
+    def get_value(self, sens_conf: ConfigType) -> SensorValueType:
+        global data
+        sens_type = sens_conf["type"]
+        return cast(
+            float,
+            data[sens_type]
+        )