The objective of ParaTest is to support parallel testing in PHPUnit. Provided you have well-written PHPUnit tests, you can drop paratest
in your project and
start using it with no additional bootstrap or configurations!
Why use paratest
over the alternative parallel test runners out there?
- Code Coverage report combining. Run your tests in N parallel processes and all the code coverage output will be combined into one report.
- Zero configuration. After composer install, run with
vendor/bin/paratest -p4 path/to/tests
. That's it! - Flexible. Isolate test files in separate processes or take advantage of WrapperRunner for even faster runs.
To install with composer run the following command:
composer require --dev brianium/paratest
For PHPUnit >= 7: Please use Paratest v2+
For PHPUnit <= 6: Please use Paratest v1.
After installation, the binary can be found at vendor/bin/paratest
. Usage is as follows:
Usage:
paratest [-p|--processes="..."] [-f|--functional] [--no-test-tokens] [-h|--help] [--coverage-clover="..."] [--coverage-html="..."] [--coverage-php="..."] [-m|--max-batch-size="..."] [--filter="..."] [--phpunit="..."] [--runner="..."] [--bootstrap="..."] [-c|--configuration="..."] [-g|--group="..."] [--exclude-group="..."] [--stop-on-failure] [--log-junit="..."] [--colors] [--testsuite[="..."]] [--path="..."] [path]
Arguments:
path The path to a directory or file containing tests. (default: current directory)
Options:
--processes (-p) The number of test processes to run. (Default: auto)
Possible values:
- Integer (>= 1): Number of processes to run.
- auto (default): Number of processes is automatically set to the number of logical CPU cores.
- half: Number of processes is automatically set to half the number of logical CPU cores.
--functional (-f) Run methods instead of suites in separate processes.
--no-test-tokens Disable TEST_TOKEN environment variables. (Default: Variable is set)
--help (-h) Display this help message.
--coverage-clover Generate code coverage report in Clover XML format.
--coverage-html Generate code coverage report in HTML format.
--coverage-php Serialize PHP_CodeCoverage object to file.
--coverage-text Generate code coverage report in text format.
--coverage-xml Generate code coverage report in PHPUnit XML format.
--max-batch-size (-m) Max batch size (only for functional mode). (Default: 0)
--filter Filter (only for functional mode).
--phpunit The PHPUnit binary to execute. (Default: vendor/bin/phpunit)
--runner Runner, WrapperRunner or SqliteRunner. (Default: Runner)
--bootstrap The bootstrap file to be used by PHPUnit.
--configuration (-c) The PHPUnit configuration file to use.
--group (-g) Only runs tests from the specified group(s).
--exclude-group Don't run tests from the specified group(s).
--stop-on-failure Don't start any more processes after a failure.
--log-junit Log test execution in JUnit XML format to file.
--colors Displays a colored bar as a test result.
--testsuite Filter which testsuite to run.
--path An alias for the path argument.
--parallel-suite Run testsuites in parallel as opposed to running test classes / test functions in parallel.
To get the most out of paratest, you have to adjust the parameters carefully.
-
Adjust the number of processes with
-p
To allow full usage of your cpu cores, you should have at least one process per core. More processes allow better resource usage but keep in mind that each process has its own costs for spawning. The default is auto, which means the number of logical CPU cores is set as number of processes. You might try something like logical
CPU cores * 2
(e.g. if you have 8 logical cores, you might try16
), but keep in mind that each process generates a little bit of overhead as well. -
Choose between per-testcase- and per-testmethod-parallelization with
-f
Given you have few testcases (classes) with many long running methods, you should use the
-f
option to enable thefunctional mode
and allow different methods of the same class to be executed in parallel. Keep in mind that the default is per-testcase-parallelization to address inter-testmethod dependencies. Note that in most projects, using-f
is slower since each test method will need to be bootstrapped separately. -
Use the WrapperRunner or SqliteRunner if possible
The default Runner for PHPUnit spawns a new process for each testcase (or method in functional mode). This provides the highest compatibility but comes with the cost of many spawned processes and a bootstrapping for each process. Especially when you have a slow bootstrapping in your tests (like a database setup) you should try the WrapperRunner with
--runner WrapperRunner
or the SqliteRunner with--runner SqliteRunner
. It spawns one "worker"-process for each parallel process (-p
), executes the bootstrapping once and reuses these processes for each test executed. That way the overhead of process spawning and bootstrapping is reduced to the minimum. -
Tune batch max size
--max-batch-size
Batch size will affect on max amount of atomic tests which will be used for single test method. One atomic test will be either one test method from test class if no data provider available for method or will be only one item from dataset for method. Increase this value to reduce per-process overhead and in most cases it will also reduce parallel efficiency. Decrease this value to increase per-process overhead and in most cases it will also increase parallel efficiency. If amount of all tests less then max batch size then everything will be processed in one process thread so paratest is completely useless in that case. The best way to find the most effective batch size is to test with different batch size values and select best. Max batch size = 0 means that grouping in batches will not be used and one batch will equal to all method tests (one or all from data provider). Max batch size = 1 means that each batch will contain only one test from data provider or one method if data provider is not used. Bigger max batch size can significantly increase phpunit command line length so process can failed. Decrease max batch size to reduce command line length. Windows has limit around 32k, Linux - 2048k, Mac OS X - 256k.
Examples assume your tests are located under ./test/unit
.
# Run all unit tests in 8 parallel processes
vendor/bin/paratest -p8 test/unit
# Run all unit tests in 4 parallel processes with WrapperRunner and output html code coverage report to /tmp/coverage
# (Code coverage requires Xdebug to be installed)
vendor/bin/paratest -p8 --runner=WrapperRunner --coverage-html=/tmp/coverage test/unit
Windows users be sure to use the appropriate batch files.
An example being:
vendor\bin\paratest.bat --phpunit vendor\bin\phpunit.bat ...
ParaTest assumes PSR-0 for loading tests.
For convenience paratest windows version use 79 columns mode to prevent blank lines in standard 80x25 windows console.
When running PHPUnit tests, ParaTest will automatically pass the phpunit.xml or phpunit.xml.dist to the phpunit runner via the --configuration switch. ParaTest also allows the configuration path to be specified manually.
ParaTest will rely on the testsuites
node of phpunit's xml configuration to handle loading of suites.
The following phpunit config file is used for ParaTest's test cases.
<?xml version="1.0" encoding="UTF-8"?>
<phpunit backupGlobals="false"
backupStaticAttributes="false"
bootstrap="../bootstrap.php"
colors="true"
convertErrorsToExceptions="true"
convertNoticesToExceptions="true"
convertWarningsToExceptions="true"
processIsolation="false"
stopOnFailure="false"
syntaxCheck="false"
>
<testsuites>
<testsuite name="ParaTest Fixtures">
<directory>./tests/</directory>
</testsuite>
</testsuites>
</phpunit>
The TEST_TOKEN
environment variable is guaranteed to have a value that is different
from every other currently running test. This is useful to e.g. use a different database
for each test:
if (getenv('TEST_TOKEN') !== false) { // Using paratest
$dbname = 'testdb_' . getenv('TEST_TOKEN');
} else {
$dbname = 'testdb';
}
ParaTest's test suite depends on PHPUnit being installed via composer. Make sure you run composer install
after cloning.
Note that The display_errors
php.ini directive must be set to stderr
to run
the test suite.
To run unit tests:
vendor/bin/phpunit test/unit
To run functional tests:
vendor/bin/phpunit test/functional
You can run all tests at once by running phpunit from the project directory.
vendor/bin/phpunit
ParaTest can run its own test suite by running it from the bin
directory.
bin/paratest
Before creating a Pull Request be sure to run vendor/bin/php-cs-fixer fix
and
commit the eventual changes.
For an example of ParaTest out in the wild check out the example.