basicpython is an interactive Python shell (aka Read-Eval-Print-Loop, or REPL) that also allows to edit and run small programs inside of the REPL using BASIC-style line-number based code editing.

As someone who grew up with the BASIC computers of the 80s, I always appreciated the directness of those simple 8-bit systems, where one lived in a single shell that would allow to experiment with BASIC statements interactively, edit programs, and perform OS functions such as listing a directory, all in one place.

Now, BASIC is not a particularly great language, but the line-number based editing approach is amazingly powerful and easy to use as long as the program does not grow too large.

The Python language improves on BASIC in many ways. I would even say, Python is BASIC done right. But Python lacks this directness, because one cannot edit and run Python code from inside the interactive Python session. You need a separate text editor, and a separate shell like bash to run programs.

basicpython extends the Python REPL to allow you to enter a small program directly using line numbers, list it, save it to disk, and run it right there. For nostalgic reasons, it also replaces the >>> prompt with a friendly READY.

Entering code

To enter code lines, prepend line numbers. For example, entering the following into basicpython will create a 2-line Python program in memory:

10 for i in range(3):
20     print(i)

Any code typed with a line number will not be executed, but rather remembered under that number.

It is common to increment the line numbers in steps of 10, so that you can insert lines later.

In Python, indentation matters. As you type the line numbers, basicpython automatically inserts spaces before the number, such that e.g. line numbers 90 and 100, despite having different numbers of digits, line up.

For convenience, once you entered a line, you don’t need to type subsequent line numbers: the system will automatically prompt you with the next line number. If the previous line opened a new block (like for), it will also automatically insert 4 spaces for you. After typing the above, you will be prompted to enter line 30; just hit Esc. So you actually only type the following: 10 for i in range(3):<Enter>print(i)<Enter><Esc>, but what you will see on the screen is this:

READY.
    10 for i in range(3): # the spaces before the number are not typed by you
    20     print(i)       # the '20' and four spaces are not typed by you
    30                    # hit Esc here

This way, you can enter any valid Python program, including defining functions and classes, and importing modules.

Listing your code

To review the program, use the list command:

READY.
list
    10 for i in range(3):
    20     print(i)
READY.

You can also give a line range to the list command. E.g. list 100-200 will only list lines 100 to 200. Alternatively, you can tell it how many lines to list by using a comma instead of a hyphen: list 100,10 would list the first 10 lines starting from line 100.

Running your code

To run your program, type run and hit the Enter key:

READY.
run
0
1
2
READY.

Changing your code

To add new lines, just enter them as described above. To insert a new line between two existing ones, use a line number between the existing lines. For example:

15     print('----')

Once you type this and hit enter, you will be automatically shown the next line (20) and placed in it to modify it. Since you don’t want to change it, press the Esc key. You can now list the program to verify that the new line is there:

READY.
list
    10 for i in range(3):
    15     print('----')
    20     print(i)
READY.

To change an existing line, just enter its line number and hit the space bar. When you type a line number that already exists, basicpython will automatically bring that line onto the screen, as if you just typed it again, and allow you to edit it.

Try it: type 10 followed by a space. You will see this:

    10 for i in range(3):  # the cursor is positioned on the 'f'

Now use the cursor keys to navigate to the 3 and change it to a 5, then hit the Enter key.

To delete a line, use the del command. For example, delete line 15 by typing del 15, then list the program again:

READY.
del 15
READY.
list
    10 for i in range(3):
    20     print(i)
READY.

Like list, the del command also allows to specify ranges of line numbers.

Saving and loading

You can save your program into a file using the save command, and load it back using load, which will overwrite any current program in memory. For example, let’s save the above program:

save my_first_program

This will now be saved under the name my_first_program.py in your working directory. The saved file is actually a valid Python script that can also be executed from outside of basicpython.

Let’s add a new line:

15     print('----')
<Esc>
list
    10 for i in range(3):
    15     print('----')
    20     print(i)
READY.

But now let's reload it, to show that this will overwrite the change you just made:

READY.
load my_first_program
READY.
list
    10 for i in range(3):
    20     print(i)
READY.

You can also combine the load and run command into a single line:

READY.
run my_first_program
0
1
2
READY.

Note that, like load, this will also overwrite any existing unsaved program in memory, and keep the newly loaded program in memory for further editing.

Advanced functionality

If your program contains function definitions and/or classes, the list command also allows you to list all function or class definitions using list def and list class, respectively. This gives you sort of a table of content. You can then list any function or class by name, for example list Bullet. Assuming your code contains a class called Bullet, this will list the lines containing the class definition. Further, you can select specific functions inside a class (or functions defined inside other functions) using dot notation, for example list Bullet.__init__. The listing can also be limited to the first number of lines, e.g. list main,10.

A more generic search operation is the find command, which allows you to list all lines containing a specific symbol. For example, find i will list all lines using a variable or function or type called i. Alternatively, the find command also allows to find arbitrary text by using regular expressions. For example:

READY.
find /int/
    20     print(i)
READY.

If you attempt to insert code lines but find yourself having run out of line numbers, you can use the renumber command to renumber the entire program starting from 10 in increments of 10.

Prerequisites

To use basicpython, you need to install a Python library called prompt_toolkit. As of this writing, installing the right version of it requires a special command as shown here:

pip3 install -e git+https://github.com/jonathanslenders/python-prompt-toolkit@2.0.4#egg=prompt_toolkit
pip3 install pygments

Then fetch basicpython with git:

git clone https://github.com/frankseide/basicpython.git

Starting basicpython

Once you have installed the above prerequisites, run the following command:

basicpython/basicpython.py

This will take you into the Python REPL that has the additional commands described above. You should see this friendly message and are ready to type away:

    **** BASIC PYTHON V1 ****

270,378,254,336 BYTES FREE

READY.

On Windows, the command to run is this:

python basicpython\basicpython.py