module-encryption-key-manager

This module was built to aid with https://sansec.io/research/cosmicsting-hitting-major-stores

From the sansec post

Upgrading is Insufficient As we warned in our earlier article, it is crucial for merchants to upgrade or apply the official isolated fix. At this stage however, just patching for the CosmicSting vulnerability is likely to be insufficient.

The stolen encryption key still allows attackers to generate web tokens even after upgrading. Merchants that are currently still vulnerable should consider their encryption key as compromised. Adobe offers functionality out of the box to change the encryption key while also re-encrypting existing secrets.

Important note: generating a new encryption key using this functionality does not invalidate the old key. We recommend manually updating the old key in app/etc/env.php to a new value rather than removing it.

Even with your store secured, there is the chance that a JWT was issued and may still be valid. Merchants are strongly encouraged to rotate their encryption key to be safe, and the Magento process of generating a new encryption key does not actually invalidate the old one.

This module is provided as-is without any warranty. Test this on your local instances, then staging, then production. Use at your own risk.

This module does not conflict with the new hotfix released by Adobe. Both this module and that hotfix improve security in the same way, by making SecretBasedJwksFactory use the most recent key. This module also provides additional tooling and improvements, please read below.

Installation

composer require gene/module-encryption-key-manager
bin/magento setup:upgrade

How to Rotate your key and protect your store

This is a rough list of steps that should be followed to prevent attacks with CosmicSting. Please read all of the steps carefully to understand the features this module provides, as well as the points of risk.

Generate a new Key and prevent old ones from being used for JWT

This should be every merchant's priority! Install this module and generate a new key with:

php bin/magento gene:encryption-key-manager:generate [--key=MY_32_CHAR_CRYPT_KEY] [--skip-saved-credit-cards]

This will force the JWT factory to use the newly generated key. Other areas of the application may continue to use the old keys. This step is the absolute priority and will help prevent attacks with CosmicSting.

• Use the --key option to manually define the new key to use during re-encryption. If no custom key is provided, a new key will be generated.
• Use the --skip-saved-credit-cards flag to skip re-encrypting the sales_order_payment cc_number_enc data. This table can be very large, and many stores will have no data saved in this column.

Fully rotate your old keys

You can take your time to do the following. You are safe from cosmicsting provided you have installed the isolated patches and used this module to generate a new encryption key.

Then you are free to decide if you wish to re-encrypt your old data, and then invalidate your old key.

1. Review your database (make sure zgrep is on version 1.12) for any tables with encrypted values. Make sure your dump is --human-readable (magerun) or --extended-insert=FALSE (mysqldump) so that all values are on the same line as the INSERT INTO

$ zgrep -P "VALUES\s*\(.*\d:\d:...*'" database.sql | awk '{print $3}' | uniq
admin_user
core_config_data
customer_entity
oauth_token
oauth_consumer
tfa_user_config
admin_adobe_ims_webapi
adobe_user_profile

Or to get a overview of all found tables with amount of records:

zgrep -P "VALUES\s*\(.*\d:\d:...*'" database.sql | awk '{print $3}' | sort | uniq -c

2. Review your env.php, if you store any encrypted values there they will need to be reissued by the provider as they may have been leaked.
3. Review functions using ->hash( from the encryptor class. Changing the keys will result in a different hash.
4. If you have custom logic to handle that, it will be something you need to work that out manually.
5. Generate a new key php bin/magento gene:encryption-key-manager:generate
   1. You can specify the new crypt key to use with php bin/magento gene:encryption-key-manager:generate --key=MY_32_CHAR_CRYPT_KEY
   2. Magento\Catalog\Model\View\Asset\Image will continue to use the key at the 0 index
   3. Magento\JwtUserToken\Model\SecretBasedJwksFactory will only use the most recently generated key at the highest index
6. Fix missing config values php bin/magento gene:encryption-key-manager:reencrypt-unhandled-core-config-data
   1. Re-run to verify php bin/magento gene:encryption-key-manager:reencrypt-unhandled-core-config-data
7. Fix 2FA data php bin/magento gene:encryption-key-manager:reencrypt-tfa-data
   1. Re-run to verify php bin/magento gene:encryption-key-manager:reencrypt-tfa-data
8. Fix up all additional identified columns like so, be careful to verify each table and column as this may not be an exhaustive list (also be aware of entity_id, row_id and id)
   1. php bin/magento gene:encryption-key-manager:reencrypt-column admin_user user_id rp_token
   2. php bin/magento gene:encryption-key-manager:reencrypt-column customer_entity entity_id rp_token
   3. php bin/magento gene:encryption-key-manager:reencrypt-column oauth_token entity_id secret
   4. php bin/magento gene:encryption-key-manager:reencrypt-column oauth_consumer entity_id secret
   5. php bin/magento gene:encryption-key-manager:reencrypt-column admin_adobe_ims_webapi id access_token
   6. php bin/magento gene:encryption-key-manager:reencrypt-column adobe_user_profile id access_token
9. Flush the cache php bin/magento cache:flush
10. At this point you should have all your data migrated to your new encryption key, to help you verify this you can do the following
    1. php bin/magento config:set --lock-env dev/debug/gene_encryption_manager_only_log_old_decrypts 1
    2. php bin/magento config:set --lock-env dev/debug/gene_encryption_manager_enable_decrypt_logging 1
    3. Monitor your logs for "gene encryption manager" to verify nothing is still using the old key
11. When you are happy you can invalidate your old key php bin/magento gene:encryption-key-manager:invalidate
    1. Magento\Catalog\Model\View\Asset\Image will continue to use the key at the 0 index in the crypt/invalidated_key section
12. Test, test test! Your areas of focus for testing include

• all integrations that use Magento's APIs
• your media should still be displaying with the same hash directory. If it is regenerating it would take up a large amount of disk space and runtime.
• admin user login/logout
• customer login/logout

Features

Automatically invalidates old JWTs when a new key is generated

When magento generates a new encryption key it still allows the old one to be used with JWTs. This module prevents that by updating \Magento\JwtUserToken\Model\SecretBasedJwksFactory to only allow keys generated against the most recent encryption key.

We inject a wrapped \Gene\EncryptionKeyManager\Model\DeploymentConfig which only returns the most recent encryption key. This means that any existing tokens are no longer usable when a new encryption key is generated.

Allows you to keep your existing media cache directories

When magento generates a new encryption key, it causes the product media cache hash to change. This causes all product media to regenerate which takes a lot of processing time which can slow down page loads for your customers, as well as consuming extra disk space. This module ensures the old hash is still used for the media gallery.

Magento stores resized product images in directories like media/catalog/product/cache/abc123/f/o/foobar.jpg, the hash abc123 is generated utilising the encryption keys in the system.

To avoid having to regenerate all the product media when cycling the encryption key there are some changes to force it to continue using the original value.

Magento\Catalog\Model\View\Asset\Image has the $encryptor swapped out with Gene\EncryptionKeyManager\Service\InvalidatedKeyHasher. Which allows you to continue to generate md5 hashes with the old key.

Prevents long running process updating order payments

This module will also fix an issue where every sales_order_payment entry was updated during the key generation process. On large stores this could take a long time. Now only necessary entries with saved card information are updated.

Logging

This module provides a mechanism to log the source for each call to decrypt. This will produce a lot of data as the magento system configuration is encrypted so each request will trigger a log write.

It is recommended to enable this logging after you have handled the re-encryption of all data in your system, but before you invalidate the old keys. This will give you an indication that you have properly handled everything, because if you see a log written it will tell you that something has been missed and where to go to find the source of the issue.

php bin/magento config:set --lock-env dev/debug/gene_encryption_manager_only_log_old_decrypts 1
php bin/magento config:set --lock-env dev/debug/gene_encryption_manager_enable_decrypt_logging 1

The log file is located in <mage_dir>/var/log/gene_encryption_key.log

bin/magento gene:encryption-key-manager:generate

You can use php bin/magento gene:encryption-key-manager:generate to generate a new encryption key

This CLI tool does the same tasks as \Magento\EncryptionKey\Controller\Adminhtml\Crypt\Key\Save::execute() with a few tweaks

• Avoids unneeded manipulation of empty sales_order_payment cc_number_enc values. This can he helpful on large stores with many items in this table.

$ php bin/magento gene:encryption-key-manager:generate --force
Generating a new encryption key
_reEncryptSystemConfigurationValues - start
_reEncryptSystemConfigurationValues - end
_reEncryptCreditCardNumbers - start
_reEncryptCreditCardNumbers - end
Cleaning cache
Done

• Use the --key option to manually define the new key to use during re-encryption. If no custom key is provided, a new key will be generated.
• Use the --skip-saved-credit-cards flag to skip re-encrypting the sales_order_payment cc_number_enc data. This table can be very large, and many stores will have no data saved in this column.
• This will automatically re-encrypt any system values in app/etc/env.php

bin/magento gene:encryption-key-manager:invalidate

You can use php bin/magento gene:encryption-key-manager:invalidate to invalidate old keys

This will create a new section to store the old invalidated_key within your env.php as well as stub out the crypt/key path with nonsense text, so that the numerical ordering of the keys is maintained.

Before invalidation

    'crypt' => [
        'key' => '84c9d7c0b305adf9ea7e19a05478bf11
2951b41e2b7f4c26e60a8e7ee00ca17b'
    ],

After invalidation

    'crypt' => [
        'key' => 'invalidpwecbVeGpoL3Jxa4PXEOdn1ej
2951b41e2b7f4c26e60a8e7ee00ca17b',
        'invalidated_key' => '84c9d7c0b305adf9ea7e19a05478bf11'
    ],

bin/magento gene:encryption-key-manager:reencrypt-unhandled-core-config-data

When Magento generates a new encryption key it re-encrypts values in core_config_data where the backend_model is defined as Magento\Config\Model\Config\Backend\Encrypted. It is likely some third party modules have not implemented this correctly and handled the decryption themselves. In these cases we need to force through the re-encryption process for them.

This command runs in dry run mode by default, do that as a first pass to see the changes that will be made. When you are happy run with --force.

$ php bin/magento gene:encryption-key-manager:reencrypt-unhandled-core-config-data
Run with --force to make these changes, this will run in dry-run mode by default
The latest encryption key is number 14, looking for old entries
################################################################################
config_id: 1347
scope: default
scope_id: 0
path: yotpo/settings/secret
updated_at: 2023-08-31 12:48:27
ciphertext_old: 0:2:abc123
plaintext: some_secret_here
ciphertext_new: 14:3:xyz456
Dry run mode, no changes have been made
################################################################################
Done

bin/magento gene:encryption-key-manager:reencrypt-column

This allows you to target a specific column for re-encryption. If the column contains JSON, you can target it using dot notation: column.field.

This command runs in dry run mode by default, do that as a first pass to see the changes that will be made. When you are happy run with --force.

You should identify all columns that need to be handled, and run them through this process.

$ bin/magento gene:encryption-key-manager:reencrypt-column customer_entity entity_id rp_token
Run with --force to make these changes, this will run in dry-run mode by default
The latest encryption key is number 1, looking for old entries
Looking for 'rp_token' in 'customer_entity', identified by 'entity_id'
########################################################################################################################
entity_id: 9876
ciphertext_old: 0:3:54+QHWqhSwuncAa87Ueph7xF9qPL1CT6+M9Z5AWuup447J33KGVw+Q+BvVLSKR1H1umiq69phKq5NEHk
plaintext: acb123
ciphertext_new: 1:3:Y52lxB2VDnKeOHa0hf7kG/d15oooib6GQOYTcAmzfuEnhfW64NAdNN4YjRrhlh2IzQBO5IbwS48JDDRh
Dry run mode, no changes have been made
########################################################################################################################
Done

bin/magento gene:encryption-key-manager:reencrypt-tfa-data

This command re-encrypts the 2FA data stored in tfa_user_config. Some of this data is doubly encrypted, which is why it needs special handling.

This command runs in dry run mode by default, do that as a first pass to see the changes that will be made. When you are happy run with --force.

This CLI has only been tested with Google Authenticator (TOTP) and U2F (Yubikey, etc). If you use Authy or DUO you MUST verify before use.

$ bin/magento gene:encryption-key-manager:reencrypt-tfa-data
Run with --force to make these changes, this will run in dry-run mode by default
This CLI has only been tested with Google Authenticator (TOTP) and U2F (Yubikey, etc). If you use Authy or DUO you *MUST* verify before use.
The latest encryption key is number 1, looking for old entries
Looking for encoded_config in tfa_user_config, identified by 'config_id'
########################################################################################################################
config_id: 1
ciphertext_old: 0:3:rV/z9+ilmOtaPGnOoZBayZ3waBNphK1RAcyWLetipM5UONn793rTyRknO1GhWxKxXC3ooJAgWDTMJPaXGRMGdj8yOqrlrjEp9uqi8D9SFgE/UTiWkBF4RRwVvZeo4lGGnll/CxJmtzuMXWa65TS0Z/a2QLdPyIH/3OomJH7sb3FgfQ==
plaintext_old: {"google":{"secret":"0:3:LKm9642Rpl0gqlBha+m3FYWnQBBtLgjdLDvjfoPo923xmxd9ykbnvX0LucKI","active":true}}
plaintext_new: {"google":{"secret":"1:3:m9mScDkTkeCdn2lXpwf5oMkL7lmgLOTYJXQyKbK\/m8QwDZVDNWI3CzH+uBaq","active":true}}
ciphertext_new: 1:3:Tw/5ik2meBqzL8oodrudxmksrOekA/DbZE5+KgBAygFxp6Zx/A7vbMyHt4+N1MtQhlnqW/mAXL3l2kDpFHIQVvi2L+23o9mRpii2ldBwmuZgDlpQsm+Q4Hf8a+t2aUKndGOMeoH6xcZXFCConC+TUI+uregFXx6B5LU4ohCY52m/v7w=
Dry run mode, no changes have been made
########################################################################################################################
Done

bin/magento gene:encryption-key-manager:get-cloud-keys

This command to get re-encrypted cloud environments variables. This one DOESN'T update existing values, it just returns new ones in console. The Dev has to update them manually in cloud console.

# No keys example
$ bin/magento gene:encryption-key-manager:get-cloud-keys
There is no old encrypted environment variables found

# There is some encoded
$ bin/magento gene:encryption-key-manager:get-cloud-keys --show-decrypted
There is no old encrypted environment variables found
The CLI command doesn\'t rewrite values. You have to update them manually in cloud console!
Rows count: 4
##################################################################
Name: CONFIG__DEFAULT__SOME_KEY
Dectypted value: dectypted_value
Old Encrypted Value: 0:3:AAA1
New Encrypted Value: 1:3:BBB1
##################################################################
Name: CONFIG__DEFAULT__SOME_KEY_2
Dectypted value: dectypted_value_2
Old Encrypted Value: 0:3:AAA2
New Encrypted Value: 1:3:BBB2

Caveats

report.WARNING: Unable to unserialize value

This is not common, it has been reported by people using this module and people using the admin controller to rotate their encryption keys. Flushing redis cache resolves the issue.

Please ensure you flush your redis cache

Now you are right to continue with the re-encryption work as stated above.

You manually replaced your encryption key

You will need to:

1. Recover your old encryption key
2. Prepend your old key to the new key, separated by \n and repeat the steps above

Other issues

Search https://github.com/genecommerce/module-encryption-key-manager/issues for other issues.