docs: add Using gnokey tutorial

docs/getting-started/local-setup/creating-a-keypair.md

@@ -0,0 +1,77 @@
+---
+id: creating-a-keypair
+---
+
+# Creating a Keypair
+
+## Overview
+
+In this tutorial, you will learn how to create your Gno keypair using 
+[`gnokey`](../../gno-tooling/cli/gnokey/gnokey.md). 
+
+Keypairs are the foundation of how users interact with blockchains; and Gno is 
+no exception. By using a 12-word or 24-word [mnemonic phrase](https://www.zimperium.com/glossary/mnemonic-seed/)
+as a source of randomness, users can derive a private and a public key.
+These two keys can then be used further; a public key derives an address which is
+a unique identifier of a user on the blockchain, while a private key is used for
+signing messages and transactions for the aforementioned address, proving a user 
+has ownership over it. 
+
+Let's see how we can use `gnokey` to generate a Gno keypair locally.
+
+## Generating a keypair
+
+The `gnokey add` command allows you to generate a new keypair locally. Simply 
+run the command, while adding a name for your keypair:
+
+```bash
+gnokey add MyKey
+```
+
+![gnokey-add-random](../../assets/getting-started/local-setup/creating-a-key-pair/gnokey-add-random.gif)
+
+After running the command, `gnokey` will ask you to enter a password that will be
+used to encrypt your keypair to the disk. Then, it will show you the following
+information:
+- Your public key, as well as the Gno address derived from it, starting with `g1...`,
+- Your randomly generated 12-word mnemonic phrase which was used to derive the keypair.
+
+:::warning Safeguard your mnemonic phrase!
+
+A **mnemonic phrase** is like your master password; you can use it over and over
+to derive the same keypairs. This is why it is crucial to store it in a safe,
+offline place - writing the phrase on a piece of paper and hiding it is highly
+recommended. **If it gets lost, it is unrecoverable.**
+
+::: 
+
+`gnokey` will generate a keybase in which it will store information about your
+keypairs. The keybase directory path is stored under the `-home` flag in `gnokey`.
+
+### Gno addresses
+
+Your **Gno address** is like your unique identifier on the network; an address
+is visible in the caller stack of an application, it is included in each
+transaction you create with your keypair, and anyone who knows your address can
+send you [coins](../../concepts/stdlibs/coin.md), etc.
+
+## Conclusion
+
+That's it 🎉
+
+You've successfully created your first Gno keypair. Check out 
+[Browsing gno.land](./browsing-gnoland.md) and 
+[Interacting with gno.land](./interacting-with-gnoland.md) to see how you can 
+use it.
+
+If you wish to learn more about `gnokey` specifically, check out the 
+[gnokey section](../../gno-tooling/cli/gnokey/gnokey.md).
+
+
+
+
+
+
+
+
+

docs/getting-started/local-setup/installation.md

@@ -35,7 +35,7 @@ git clone https://github.com/gnolang/gno.git
 There are three tools that should be used for getting started with Gno development:
 - `gno` - the GnoVM binary
 - `gnodev` - the Gno [development helper](../../gno-tooling/cli/gnodev.md)
-- `gnokey` - the Gno [keypair manager](working-with-key-pairs.md)
+- `gnokey` - the Gno [keypair manager](../../gno-tooling/cli/gnokey/working-with-key-pairs.md)
 
 To install all three  tools, simply run the following in the root of the repo:
 ```bash
@@ -87,7 +87,7 @@ You should get the following output:
 
 `gnokey` is the gno.land keypair management CLI tool. It allows you to create
 keypairs, sign transactions, and broadcast them to gno.land chains. Read more
-about `gnokey` [here](../../gno-tooling/cli/gnokey.md).
+about `gnokey` [here](../../gno-tooling/cli/gnokey/gnokey.md).
 
 To verify that the `gnokey` binary is installed system-wide, you can run:
 
@@ -106,5 +106,5 @@ That's it 🎉
 You have successfully built out and installed the necessary tools for Gno
 development!
 
-In further documents, you will gain a better understanding on how they are used
+In further documents, you will gain a better understanding of how they are used
 to make Gno work.

docs/getting-started/local-setup/interacting-with-gnoland.md

@@ -10,19 +10,18 @@ You will understand how to use your keypair to send transactions to realms
 and packages, send native coins, and more.
 
 ## Prerequisites
+
 - **`gnokey` installed.** Reference the
-[Local Setup](installation.md#3-installing-other-gno-tools) guide for steps
-- **A keypair in `gnokey`.** Reference the 
-[Working with Key Pairs](working-with-key-pairs.md#adding-a-private-key-using-a-mnemonic) guide for steps
+[Local Setup](installation.md) guide for steps
+- **A keypair in `gnokey`.** Reference the [Creating a key pair](creating-a-keypair.md) guide for steps
 
 ## 1. Get testnet GNOTs
 For interacting with any gno.land chain, you will need a certain amount of GNOTs
 to pay gas fees with. 
 
 For this example, we will use the [Portal Loop](../../concepts/testnets.md#portal-loop) 
 testnet. We can access the Portal Loop faucet through the
-[Gno Faucet Hub](https://faucet.gno.land), or by accessing the faucet directly at
-[gno.land/faucet](https://gno.land/faucet). 
+[Gno Faucet Hub](https://faucet.gno.land).
 
 ![faucet-hub](../../assets/getting-started/local-setup/interacting-with-gnoland/faucet-hub.png)
 
@@ -35,7 +34,7 @@ After inputting your address and solving the captcha, you can check if you have
 following `gnokey` command:
 
 ```bash
-gnokey query bank/balances/<your_gno_address> --remote "https://rpc.gno.land:443"    
+gnokey query bank/balances/<your_gno_address> --remote "https://rpc.gno.land:443"
 ```
 
 If the faucet request was successful, you should see something similar to the 
@@ -48,15 +47,16 @@ data: "10000000ugnot"
 ```
 
 ## 2. Visit a realm
+
 For this example, we will use the [Userbook realm](https://gno.land/r/demo/userbook).
 The Userbook realm is a simple app that allows users to sign up, and keeps track
 of when they signed up. It also displays the currently signed-up users and the block
 height at which they have signed up.
 
 ![userbook-default](../../assets/getting-started/local-setup/interacting-with-gnoland/userbook-default.png)
 
-> Note: block heights are not correct because of the way the Portal Loop testnet 
-> works.
+> Note: block heights in this case are unreliable because of the way the Portal Loop
+> network works.
 > Read more [here](../../concepts/portal-loop.md). 
 
 To see what functions are available to call on the Userbook realm, click
@@ -67,7 +67,7 @@ the `[help]` button.
 By choosing one of the two `gnokey` commands and inputting your address 
 (or keypair name) in the top bar, you will have a ready command to paste into your 
 terminal. For example, the following command will call the `SignUp` function with the
-keypair `MyKeypair`: 
+keypair `MyKey`: 
 
 ```
 gnokey maketx call \
@@ -79,11 +79,11 @@ gnokey maketx call \
 -broadcast \
 -chainid "portal-loop" \
 -remote "https://rpc.gno.land:443" \
-MyKeypair
+MyKey
 ```
 
-To see what each option and flag in this command does, read the `gnokey` 
-[reference page](../../gno-tooling/cli/gnokey.md). 
+To see what each option and flag in this command does, check out `gnokey` in the 
+[tooling section](../../gno-tooling/cli/gnokey/gnokey.md). 
 
 ## Conclusion
 
@@ -92,6 +92,6 @@ That's it! Congratulations on executing your first transaction on a Gno network!
 If the previous transaction was successful, you should be able
 to see your address on the main page of the Userbook realm. 
 
-This concludes the "Local Setup" tutorial. For next steps, see the 
+This concludes the "Local Setup" section. For next steps, see the 
 [How-to guides section](../../how-to-guides/how-to-guides.md), where you will 
 learn how to write your first realm, package, and much more.

docs/gno-tooling/cli/faucet/faucet.md

@@ -22,7 +22,7 @@ The Gno faucet works by designating a single address as a faucet address that wi
 Ensure the faucet account will have enough funds
 by [premining its balance](../../../gno-infrastructure/premining-balances.md) to a high value.
 In case you do not have an existing address added to `gnokey`, you can consult
-the [Working with Key Pairs](../../../getting-started/local-setup/working-with-key-pairs.md) guide.
+the [Working with Key Pairs](../gnokey/working-with-key-pairs.md) guide.
 
 ## 2. Start the local chain