proposal: net/v2: Listen is unfriendly to multiple address families, endpoints and subflows

[pmarks-net]

The following example program:

package main

import (
        "net"
)

func main() {
        net.Listen("tcp", "localhost:8080")
        select{}
}

Currently yields this result:

$ netstat -nl | grep 8080
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN

While the following result would be optimal:

$ netstat -nl | grep 8080
tcp6       0      0 127.0.0.1:8080          :::*                    LISTEN
tcp6       0      0 ::1:8080                :::*                    LISTEN

(Note that the first socket is actually dualstack, and bound to ::ffff:127.0.0.1, but that's less critical than adding the second socket bound to ::1.)

More generally, when you call net.Listen() on a hostname which resolves to multiple IPv4/IPv6 addresses, only the first IPv4 address is selected. An analogous problem occurs if you Listen("tcp", ":8080") on an operating system that doesn't support dualstack sockets: instead of returning a pair of sockets bound to [::]:8080 and 0.0.0.0:80, you only get IPv4.

The fundamental flaw is that Listen() assumes a single socket, which is a leaky abstraction that's inappropriate for high-level things like example servers, e.g.:
http://golang.org/pkg/net/#pkg-overview

Go should either adapt the Listen() API to support multiple sockets, or if that's not feasible, a new multi-socket API should be introduced, which deprecates Listen() for all cases except simple non-wildcard addresses.

[bradfitz]

/cc @mikioh

[minux]

The correct way to listen for both tcp4 and tcp6 is to leave out the
hostname part.
net.Listen("tcp", ":8080")

Will listen on tcp6 if it's dual-stack system.

I don't think net.Listen should automatically create multiple listener for
each IP
that the hostname resolve to, that is a higher-level thing that the client
should
take care of.

For example, what if the machine added another network interface and another
ip, should the net package track that and automatically listen on the newly
added
IP? This is a decision that the client program should make, not net
package's.

[pmarks-net]

net.Listen("tcp", ":8080") ... Will listen on tcp6 if it's dual-stack system.

That's not entirely accurate. There do exist dual-stack systems which don't support dual-stack sockets, so AF_INET and AF_INET6 must be kept separate. In that case, Listen falls back to IPv4, which is suboptimal.

for each IP that the hostname resolve to, that is a higher-level thing

If Listen didn't accept hostnames then I'd agree with you, but hostnames are accepted, and with great power comes great responsibility. Arbitrarily picking one IP address just isn't right. If the "prefer IPv4" bug were fixed, then localhost listeners would flip to ::1 only, which would surprise a lot of people.

[minux]

What should happen if more IPs are added to a hostname? Should
the net package automatically listen on those newly added addrs?

No matter what we do, I think the behavior will surprise some users.

Also, what do you think should the Listener's Addr() method return
for a listener that listens on multiple addresses? Return the hostname
is not entirely correct. Because when the Addr() is called, hostname
might resolve to a different set of addresses. Also note that Addr
represents a network end point address, i don't think a hostname
fits here.

IMHO, the existing documentation actually precludes listening on
multiples addresses by a single listener.

I always think supporting hostname in Listen is just a convenience,
and if you want absolute control, you should use explicit address.

[pmarks-net]

what do you think should the Listener's Addr() method return for a listener that listens on multiple addresses?

I don't have a good answer, and that's the fundamental flaw I was referring to. Since there's nothing sane for Addr() to return, it may be necessary to create a new MultiListener, and migrate the prominent documentation and sample code.

What should happen if more IPs are added to a hostname?

Perhaps have a type that stores a resolved AddressSet, and another type that holds the listening sockets, where you can Read the AddressSet (to see which sockets exist) or Write it (to open new sockets and close obsolete ones). Then sufficiently-crazy users could resolve multiple hostnames, merge the results together, and dynamically update the pool of sockets without interrupting existing listeners.

But I don't care strongly about the dynamic stuff; I just think listening on localhost or ::+0.0.0.0 should be easy.

The problem is that net.Listen() is easy, popular, and wrong. The alternative (keeping track of multiple listening sockets, with dual-stack behavior that varies by OS) is so much more involved that people avoid doing the right thing, and IPv6 compatibility suffers as a result.

[minux]

I wouldn't call the current net.Listen wrong. It just can't handle every
possible
cases. And I don't think a dual-stack system without IPv4-mapped IPv6
support
is the common case. (Even if we add such support, how could we test it on
the builders?)

See also #8124, which has more in-depth discussion of the prefer-IPv4 issue.
Supporting all possible configurations is just an impossible task.

[pmarks-net]

Even if we add such support, how could we test it on the builders?

I encountered the same question when working on a C networking library, and the solution was to funnel the IPV6_V6ONLY calls through a function with a test-only flag that emulates an OS without dualstack sockets:

/* Returns 1 on success (dual-stack), 0 on failure (single-stack). */
static int set_socket_dualstack(int fd) {
  if (!forbid_dualstack_sockets_for_testing) {
    const int off = 0;
    return 0 == setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &off, sizeof(off));
  } else {
    /* Force an IPv6-only socket, for testing purposes. */
    const int on = 1;
    setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &on, sizeof(on));
    return 0;
  }
}

Granted, a flag is a bit unsightly, but it's an easy way to ensure coverage of the :: to ::+0.0.0.0 fallback logic.

Supporting all possible configurations is just an impossible task.

I don't agree with that defeatist position; getaddrinfo() with a loop solves the problem for non-pathological cases, and is significantly better than "Pick one IPv4 address."

When a standard library exposes hostname-based socket interfaces, it's the library's responsibility to follow best practices, instead of taking shortcuts. "one hostname ⇒ one socket" is a shortcut that's not obvious to users of the library, but which seems harmful to the networking ecosystem.

Pretending that no code had yet been written, I don't think a Listen(hostname) design that arbitrarily picks a single IP address would stand up to logical scrutiny.

[mikioh]

We perhaps need to support this eventually. In that case the new stuff should support not only for dual-stack TCP listeners but for SCTP, MPTCP listeners.

Random thoughts on API:

• New interface such as MultiListener seems reasonable
• It would also implement Listener interface
• Addr method of MultiListener returns a list of addresses, or always returns the first address

Random thoughts on testing:

• We can make a small, dedicated testbed network by using builders (even though GCE not support IPv6 yet)
• The testbed would also be useful for testing some layer's keep-alive, recovery scenarios

Random thoughts on roadmap:

• For now, adding a concrete type into the net package seems wrong
• We need to make a easy way to inject external types that implement Conn, Addr interface into the net package for keeping the package small
• Most hard part would be to re-plumb runtime-integrated network poller

References:

• https://tools.ietf.org/html/rfc6458
• https://tools.ietf.org/html/rfc6897

PS: Moreover, I'd want to see what happens with the IP Stack Evolution Program: http://www.ietf.org/proceedings/91/slides/slides-91-iab-techplenary-6.pdf

[mattn]

Is this related issue? #7598

[mikioh]

No, #7598 is a simple, Windows-specific investigation; how Windows dual IP stacks behave when we use it.

[gopherbot]

CL https://golang.org/cl/31931 mentions this issue.

[a-robinson]

I don't expect to tilt the scales much compared to the very impressive selection of open source projects that appear to have run into this, but add my vote to the pile in favor of allowing binding on a hostname or on a network interface name to listen to all associated IPs. It shouldn't be so hard to listen on both an IPv4 and IPv6 address associated with a given hostname (without listening on all interfaces).

[halturin]

are there any updates on this issue? 8 years now.

[llllvvuu]

as the most common behaviour for a networking stack which accepts a hostname is to listen on all addresses that the hostname references at application initialization.

Do you have any examples of networking stdlibs that behave this way? I agree that the proposed behavior would be an improvement, but unfortunately Node.js doesn't have it either for example:

Welcome to Node.js v20.3.1.
> require('http').createServer((_, res) => res.end("hi")).listen(3000, "localhost")
; curl 127.0.0.1:3000
curl: (7) Failed to connect to 127.0.0.1 port 3000 after 6 ms: Couldn't connect to server
; curl localhost:3000
hi
; cat /etc/hosts
127.0.0.1		localhost
255.255.255.255		broadcasthost
::1                          localhost

nor does Python:

; python -m http.server --bind localhost    
Serving HTTP on ::1 port 8000 (http://[::1]:8000/) ...
; curl localhost:8000
...
; curl 127.0.0.1:8000
curl: (7) Failed to connect to 127.0.0.1 port 8000 after 6 ms: Couldn't connect to server

In Rust, the only HTTP server I can find which accepts hostname is Iron, which also resolves only to one interface:

; cd examples
; cargo run --bin hello
; curl localhost:3000
Hello world!%;
curl 127.0.0.1:3000
curl: (7) Failed to connect to 127.0.0.1 port 3000 after 6 ms: Couldn't connect to server