chore: transition the library to the new microgenerator

.gitignore

@@ -46,6 +46,7 @@ pip-log.txt
 # Built documentation
 docs/_build
 bigquery/docs/generated
+docs.metadata
 
 # Virtual environment
 env/
@@ -57,4 +58,4 @@ system_tests/local_test_setup
 
 # Make sure a generated file isn't accidentally committed.
 pylintrc
-pylintrc.test
+pylintrc.test

.kokoro/build.sh

@@ -36,4 +36,10 @@ python3.6 -m pip uninstall --yes --quiet nox-automation
 python3.6 -m pip install --upgrade --quiet nox
 python3.6 -m nox --version
 
-python3.6 -m nox
+# If NOX_SESSION is set, it only runs the specified session,
+# otherwise run all the sessions.
+if [[ -n "${NOX_SESSION:-}" ]]; then
+    python3.6 -m nox -s "${NOX_SESSION:-}"
+else
+    python3.6 -m nox
+fi

.kokoro/docker/docs/Dockerfile

@@ -0,0 +1,98 @@
+# Copyright 2020 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from ubuntu:20.04
+
+ENV DEBIAN_FRONTEND noninteractive
+
+# Ensure local Python is preferred over distribution Python.
+ENV PATH /usr/local/bin:$PATH
+
+# Install dependencies.
+RUN apt-get update \
+  && apt-get install -y --no-install-recommends \
+    apt-transport-https \
+    build-essential \
+    ca-certificates \
+    curl \
+    dirmngr \
+    git \
+    gpg-agent \
+    graphviz \
+    libbz2-dev \
+    libdb5.3-dev \
+    libexpat1-dev \
+    libffi-dev \
+    liblzma-dev \
+    libreadline-dev \
+    libsnappy-dev \
+    libssl-dev \
+    libsqlite3-dev \
+    portaudio19-dev \
+    redis-server \
+    software-properties-common \
+    ssh \
+    sudo \
+    tcl \
+    tcl-dev \
+    tk \
+    tk-dev \
+    uuid-dev \
+    wget \
+    zlib1g-dev \
+  && add-apt-repository universe \
+  && apt-get update \
+  && apt-get -y install jq \
+  && apt-get clean autoclean \
+  && apt-get autoremove -y \
+  && rm -rf /var/lib/apt/lists/* \
+  && rm -f /var/cache/apt/archives/*.deb
+
+
+COPY fetch_gpg_keys.sh /tmp
+# Install the desired versions of Python.
+RUN set -ex \
+    && export GNUPGHOME="$(mktemp -d)" \
+    && echo "disable-ipv6" >> "${GNUPGHOME}/dirmngr.conf" \
+    && /tmp/fetch_gpg_keys.sh \
+    && for PYTHON_VERSION in 3.7.8 3.8.5; do \
+        wget --no-check-certificate -O python-${PYTHON_VERSION}.tar.xz "https://www.python.org/ftp/python/${PYTHON_VERSION%%[a-z]*}/Python-$PYTHON_VERSION.tar.xz" \
+        && wget --no-check-certificate -O python-${PYTHON_VERSION}.tar.xz.asc "https://www.python.org/ftp/python/${PYTHON_VERSION%%[a-z]*}/Python-$PYTHON_VERSION.tar.xz.asc" \
+        && gpg --batch --verify python-${PYTHON_VERSION}.tar.xz.asc python-${PYTHON_VERSION}.tar.xz \
+        && rm -r python-${PYTHON_VERSION}.tar.xz.asc \
+        && mkdir -p /usr/src/python-${PYTHON_VERSION} \
+        && tar -xJC /usr/src/python-${PYTHON_VERSION} --strip-components=1 -f python-${PYTHON_VERSION}.tar.xz \
+        && rm python-${PYTHON_VERSION}.tar.xz \
+        && cd /usr/src/python-${PYTHON_VERSION} \
+        && ./configure \
+            --enable-shared \
+            # This works only on Python 2.7 and throws a warning on every other
+            # version, but seems otherwise harmless.
+            --enable-unicode=ucs4 \
+            --with-system-ffi \
+            --without-ensurepip \
+        && make -j$(nproc) \
+        && make install \
+        && ldconfig \
+  ; done \
+  && rm -rf "${GNUPGHOME}" \
+  && rm -rf /usr/src/python* \
+  && rm -rf ~/.cache/
+
+RUN wget -O /tmp/get-pip.py 'https://bootstrap.pypa.io/get-pip.py' \
+  && python3.7 /tmp/get-pip.py \
+  && python3.8 /tmp/get-pip.py \
+  && rm /tmp/get-pip.py
+
+CMD ["python3.7"]

.kokoro/docker/docs/fetch_gpg_keys.sh

@@ -0,0 +1,45 @@
+#!/bin/bash
+# Copyright 2020 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# A script to fetch gpg keys with retry.
+# Avoid jinja parsing the file.
+# 
+
+function retry {
+    if [[ "${#}" -le 1 ]]; then
+	echo "Usage: ${0} retry_count commands.."
+	exit 1
+    fi
+    local retries=${1}
+    local command="${@:2}"
+    until [[ "${retries}" -le 0 ]]; do
+	$command && return 0
+	if [[ $? -ne 0 ]]; then
+	    echo "command failed, retrying"
+	    ((retries--))
+	fi
+    done
+    return 1
+}
+
+# 3.6.9, 3.7.5 (Ned Deily)
+retry 3 gpg --keyserver ha.pool.sks-keyservers.net --recv-keys \
+      0D96DF4D4110E5C43FBFB17F2D347EA6AA65421D
+
+# 3.8.0 (Łukasz Langa)
+retry 3 gpg --keyserver ha.pool.sks-keyservers.net --recv-keys \
+      E3FF2839C048B25C084DEBE9B26995E310250568
+
+# 

.kokoro/docs/common.cfg

@@ -11,12 +11,12 @@ action {
 gfile_resources: "/bigstore/cloud-devrel-kokoro-resources/trampoline"
 
 # Use the trampoline script to run in docker.
-build_file: "python-pubsub/.kokoro/trampoline.sh"
+build_file: "python-pubsub/.kokoro/trampoline_v2.sh"
 
 # Configure the docker image for kokoro-trampoline.
 env_vars: {
     key: "TRAMPOLINE_IMAGE"
-    value: "gcr.io/cloud-devrel-kokoro-resources/python-multi"
+    value: "gcr.io/cloud-devrel-kokoro-resources/python-lib-docs"
 }
 env_vars: {
     key: "TRAMPOLINE_BUILD_FILE"
@@ -28,6 +28,23 @@ env_vars: {
     value: "docs-staging"
 }
 
+env_vars: {
+    key: "V2_STAGING_BUCKET"
+    value: "docs-staging-v2-staging"
+}
+
+# It will upload the docker image after successful builds.
+env_vars: {
+    key: "TRAMPOLINE_IMAGE_UPLOAD"
+    value: "true"
+}
+
+# It will always build the docker image.
+env_vars: {
+    key: "TRAMPOLINE_DOCKERFILE"
+    value: ".kokoro/docker/docs/Dockerfile"
+}
+
 # Fetch the token needed for reporting release status to GitHub
 before_action {
   fetch_keystore {

.kokoro/docs/docs-presubmit.cfg

@@ -0,0 +1,17 @@
+# Format: //devtools/kokoro/config/proto/build.proto
+
+env_vars: {
+    key: "STAGING_BUCKET"
+    value: "gcloud-python-test"
+}
+
+env_vars: {
+    key: "V2_STAGING_BUCKET"
+    value: "gcloud-python-test"
+}
+
+# We only upload the image in the main `docs` build.
+env_vars: {
+    key: "TRAMPOLINE_IMAGE_UPLOAD"
+    value: "false"
+}

.kokoro/publish-docs.sh

@@ -18,26 +18,16 @@ set -eo pipefail
 # Disable buffering, so that the logs stream through.
 export PYTHONUNBUFFERED=1
 
-cd github/python-pubsub
-
-# Remove old nox
-python3.6 -m pip uninstall --yes --quiet nox-automation
+export PATH="${HOME}/.local/bin:${PATH}"
 
 # Install nox
-python3.6 -m pip install --upgrade --quiet nox
-python3.6 -m nox --version
+python3 -m pip install --user --upgrade --quiet nox
+python3 -m nox --version
 
 # build docs
 nox -s docs
 
-python3 -m pip install gcp-docuploader
-
-# install a json parser
-sudo apt-get update
-sudo apt-get -y install software-properties-common
-sudo add-apt-repository universe
-sudo apt-get update
-sudo apt-get -y install jq
+python3 -m pip install --user gcp-docuploader
 
 # create metadata
 python3 -m docuploader create-metadata \
@@ -52,4 +42,23 @@ python3 -m docuploader create-metadata \
 cat docs.metadata
 
 # upload docs
-python3 -m docuploader upload docs/_build/html --metadata-file docs.metadata --staging-bucket docs-staging
+python3 -m docuploader upload docs/_build/html --metadata-file docs.metadata --staging-bucket "${STAGING_BUCKET}"
+
+
+# docfx yaml files
+nox -s docfx
+
+# create metadata.
+python3 -m docuploader create-metadata \
+  --name=$(jq --raw-output '.name // empty' .repo-metadata.json) \
+  --version=$(python3 setup.py --version) \
+  --language=$(jq --raw-output '.language // empty' .repo-metadata.json) \
+  --distribution-name=$(python3 setup.py --name) \
+  --product-page=$(jq --raw-output '.product_documentation // empty' .repo-metadata.json) \
+  --github-repository=$(jq --raw-output '.repo // empty' .repo-metadata.json) \
+  --issue-tracker=$(jq --raw-output '.issue_tracker // empty' .repo-metadata.json)
+
+cat docs.metadata
+
+# upload docs
+python3 -m docuploader upload docs/_build/html/docfx_yaml --metadata-file docs.metadata --destination-prefix docfx --staging-bucket "${V2_STAGING_BUCKET}"