Skip to content

Personal Proteus Design Suite libraries (schematic symbols and packages/footprints)

License

Notifications You must be signed in to change notification settings

gutierrezps/proteus-lib

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

3 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Proteus Library

This is my personal library for the Labcenter Electronics Proteus Design Suite (ISIS and ARES programs). Files YZDEVLIB contain schematic symbols, and YZPKGLIB contain PCB packages. Some schematic symbols were copied from the default libraries because I assigned different/aditional footprints for them.

Tested on Proteus 7.8 and 7.10, I'm not sure if they work on Proteus 8.

Feel free to contribute with new symbols and/or packages.

Installation

  • Make sure ISIS and ARES are not running
  • Download this repo as zip and extract it
  • Copy/move files *.LIB and *.IDX into C:\Users\<username>\AppData\Local\VirtualStore\Program Files (x86)\Labcenter Electronics\Proteus 7 Professional\LIBRARY if this path exists, otherwise into C:\Program Files (x86)\Labcenter Electronics\Proteus 7 Professional\LIBRARY.

Schematic symbols

  • 1N4148 - diode
  • 24C16 - I2C memory
  • ACS712 module - current sensor
  • Arduino Nano, Arduino Pro Mini
  • AS1582 - voltage regulator
  • AU-Y1007-R - USB plug
  • BAT20J - schottky diode
  • BATT, BATT-12MM, BATT-20MM - battery cell
  • BC327, BC337 - BJT transistors
  • BUZZER
  • CONN-DIL12, DIL14, DIL40
  • CONN-SIL1, SIL11, SIL12, SIL15, SIL3, SIL4, SIL5, SIL6, SIL7
  • CONN_2x23 (DIL23)
  • CRYSTAL
  • D1-MINI - Wemos D1 Mini
  • DC JACK
  • DC-DC - stepdown DC converter
  • DIODE-SC
  • DS1337 - low power RTC
  • ESP-01, ESP-12E - ESP8266 modules
  • HLK-PMXXX - Hi-Link AC-DC module (PM01, PM03, PM09, PM012)
  • INDUCTOR
  • JUMPER
  • LED
  • LED_RGB
  • LLC1 - 4-channel logic level converter module
  • LM016L - 16x2 LCD
  • LM041L - 16x4 LCD
  • MBRA130LT3G - schottky diode
  • MOTOR_3PHASE
  • POT - potentiometer
  • PUSH-BUTTON, PUSH-BUTTON-DP - single and dual pole tactile switches
  • RES - resistor
  • RJ-45 - "Ethernet" connector
  • SW-DPDT, SW-SPDT, SW-SPST - switches
  • TINYRTC - RTC module

Footprints/Packages

  • 0605, 0805-DIODE
  • ACS712_MODULE
  • ARDUINO_NANO, ARDUINO_PRO_MINI
  • BATT-12MM, BAT-20MM - coin cell batteries
  • BR1/2AAE5P - battery
  • BRC-DS-210 - DC power jack
  • BUZZER-12MM, BUZZER-M12-300, BUZZER-M9.5-200 - buzzers [diameter]-[pitch]
  • CAP-PANASONIC-SMD-D
  • CMR200T - crystal
  • CONN-DIL12-R, DIL14 - round pads
  • CONN-SIL1-R, SIL10, SIL15, SIL3, SIL4, SIL6, SIL7 - round pads
  • CONN-SIL11, SIL15, SIL8 - square pads
  • CONN40_2X20 (DIL20)
  • CONN46_2X23 (DIL23)
  • D1-MINI - Wemos D1 Mini module
  • ESP-01, ESP-12E, ESP12E-DIP - ESP8266 modules
  • GRPB031VWTC-RC, GRPB051VWTC-RC, GRPB061VWTC-RC, GRPB071VWTC-RC - SMD pin headers
  • HLK-PMXXX - Hi-Link AC-DC module (PM01, PM03, PM09, PM012)
  • LCD_1602B-E, LCD-1602G, LCD_JHD539 - alphanumeric LCD displays
  • LED_3MM, LED_RGB
  • LLC1 - 4-channel logic level converter module
  • LPPB031NFFN-RC, LPPB051NFFN-RC, LPPB061NFFN-RC, LPPB121NFFN-RC - pin headers female
  • MP1584-MODULE - stepdown DC converter
  • RES10 - upright resistor
  • RES30 - resistor
  • RJ-45 - "Ethernet" female connector
  • SMA-2, SOD-80 - diode
  • SW-DPDT-7X7 - 7x7 mm switch
  • SW-KFT-8.5 - 8.5mm switch
  • SW-MICRO-SPDT - micro switch (lever)
  • SW-PUSH-2T, SW-PUSH-2T-RIGHT - 2-pin tactile switches
  • SW-PUSH-4T - 4-pin tactile switches
  • TINYRTC - RTC module
  • TO263-5 - 5-pin SMD package (used by the AS1582)
  • XTAL-SM - crystal
  • YH-55-05 - RJ45 "ethernet" female connector

2018 - Gutierrez PS

About

Personal Proteus Design Suite libraries (schematic symbols and packages/footprints)

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published