Release 1.4.2

CHANGELOG.md

@@ -1,7 +1,8 @@
 # Changelog
 
 All notable changes to this project will be documented in this file.
-## [unreleased]
+
+## [1.4.2] 2024-06-17
 
 ### Fixed
  - `CONFIG_BT_NIMBLE_NVS_PERSIST` value not being used to enable/disable persistance.

docs/Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = NimBLE-Arduino
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 1.4.1
+PROJECT_NUMBER         = 1.4.2
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

docs/Usage_tips.md

@@ -5,6 +5,33 @@
 When commands are sent to the stack from a different core they can experience delays in execution.  
 This library detects this and invokes the esp32 IPC to reroute these commands through the correct core but this also increases overhead.  
 Therefore it is highly recommended to create tasks for BLE to run on the same core, the macro `CONFIG_BT_NIMBLE_PINNED_TO_CORE` can be used to set the core.
+
+Here is an example of how to do this:
+```
+void BLETask(void* param) {
+  for(;;) {
+    ..BLE STUFF GOES HERE..
+    delay(1); // always delay in the loop to allow other tasks to run
+  }
+  vTaskDelete(NULL); // should never get here
+}
+
+void setup() {
+  ...YOUR INIT CODE...
+  xTaskCreatePinnedToCore(
+     BLETask, /* Function to implement the task */
+     "BLETask", /* Name of the task */
+     4096, /* Stack size in bytes */
+     NULL, /* Task input parameter */
+     2, /* Priority of the task (set higher than loop) */
+     nullptr, /* Task handle. */
+     CONFIG_BT_NIMBLE_PINNED_TO_CORE); /* Core where main nimble task runs */
+}
+
+void loop() {
+  delay(1);
+}
+```
 <br/>  
 
 ## Do not delete client instances unless necessary or unused

docs/index.md

@@ -24,7 +24,7 @@ Call `NimBLEDevice::init` in `setup`.
 * Open platformio.ini, a project configuration file located in the root of PlatformIO project.  
 * Add the following line to the lib_deps option of [env:] section:
 ```
-h2zero/NimBLE-Arduino@^1.4.0
+h2zero/NimBLE-Arduino@^1.4.2
 ```
 * Build a project, PlatformIO will automatically install dependencies.  
 <br/>

library.properties

@@ -1,5 +1,5 @@
 name=NimBLE-Arduino
-version=1.4.1
+version=1.4.2
 author=h2zero
 maintainer=h2zero <powellperalta@gmail.com>
 sentence=Bluetooth low energy (BLE) library for arduino-esp32 based on NimBLE.