home-assistant-qubino-wire-pilot

Home Assistant Component for Qubino Wire Pilot

Introduction

The Qubino ZMNHJD1 is not recognized as a thermostat in Home Assistant but as a light. The light percentage is mapped to a mode.

Value	Min	Max
Off	0%	10%
Frost protection	11%	20%
Eco	21%	30%
Comfort -2	31%	40%
Comfort -1	41%	50%
Comfort	51%	100%

This component create a climate entity using the light entity.

The climate will have 2 modes :

• heat - splitted into 3 or 5 presets :
  • comfort - mapped qubino "Comfort" mode
  • comfort-1 - mapped qubino "Comfort -1" mode (optional)
  • comfort-2 - mapped qubino "Comfort -2" mode (optional)
  • eco - mapped qubino "Eco" mode
  • away - mapped qubino "Frost protection" mode
• off - mapped qubino "Off" mode :

⚠️ "Comfort -1" and "Comfort -2" are not available by default because home assistant doesn't have comfort-1 and comfort-2 preset. If you want to support these modes, add additional_modes: true in your configuration.

Configuration

Key	Type	Required	Description
platform	string	yes	Platform name
heater	string	yes	Light entity
sensor	string	no	Temperature sensor (for display)
additional_modes	boolean	no	6-order support (add Comfort -1 and Comfort -2 preset)
name	string	no	Name to use in the frontend.
unique_id	string	no	An ID that uniquely identifies this climate. If two climates have the same unique ID, Home Assistant will raise an error.

The unique id is recommended to allow icon, entity_id or name changes from the UI.

Example

climate:
  - platform: qubino_wire_pilot
    heater: light.heater_living_room_dimmer

with 6 order

climate:
  - platform: qubino_wire_pilot
    heater: light.heater_living_room_dimmer
    additional_modes: true

with optional sensor

climate:
  - platform: qubino_wire_pilot
    heater: light.heater_living_room_dimmer
    sensor: sensor.temperature_living_room

Unique ID

The unique_id is used to edit the entity from the GUI. It's automatically generated from heater entity_id. As the unique_id must be unique, you can not create 2 entities with the same heater.

If you want to have 2 climate with the same heater, you must specify the unique_id in the config.

climate:
  - platform: qubino_wire_pilot
    heater: light.heater_living_room_dimmer
    unique_id: qubino_heater_living_room_1
  - platform: qubino_wire_pilot
    heater: light.heater_living_room_dimmer
    unique_id: qubino_heater_living_room_2

Lovelace

You can use the climate-mode-entity-row card in your lovelace dashboard to easily switch between modes.