FinallyPBC_card

[Jaumix3]

Submission Checklist:

• I am a current high school, middle school, or home schooled student.

  • I am 18 or under
  • I have filled out the verification form (do this for every pull request)
    • or the legacy verification form if the above doesn't work

• I have joined the #electronics channel on Slack

• I made this board from scratch, even if I followed a tutorial

• I have followed the directions in README.md

  • Created a folder under onboard/projects
  • Filled out TEMPLATE.md as README.md inside your project folder
  • Uploaded gerber.zip and schematic.pdf inside your project folder
  • Created a folder called src and uploaded design files
  • Uploaded screenshot of PCB order called cart.png with all costs included
  • I am ordering the smallest batch size (ie. JLCPCB's smallest order is for 5 boards)
  • If outside the US I've checked that I can afford the customs charges in my country (which isn't covered by the grant)

• (Optional) This project is from a tutorial¹.

• (Optional) This project is for OnBoard Live².

• (Optional) This project is for Trick or Trace³.

• (Optional) I'm in a FIRST (FRC, FTC, FLL, etc.) team. The number is: ____

Footnotes

1. Projects from a tutorial are 100% fine! We just want to ask so we can count how people are using tutorials. ↩

2. OnBoard Live is a special version of OnBoard where you can earn more money for designing advanced boards. Check out the #onboard-live channel on our Slack! ↩

3. Trick or Trace is a limited time design contest for PCBs, enter your PCB into one of the three catagories and by peer voting, get chosen for a 100$ additional grant from OnBoard. ↩

[prophetorpheus]

Hi, I'm Orpheus Leap! Here to help you review your PR.

projects/finallyPCB_card:

Required files

✅	README.md	A description of your project
✅	cart.png
✅	gerber.zip
✅	schematic.pdf	Manually check schematic.pdf
✅	Source files - EasyEDA	Found both PCB and SCH files

You can view a render of your board over on gerber.zip/2d!

Happy OnBoarding!
_{This bot is a simpler helper for common submission types. If there's an error with this, please point it out and someone from the OnBoard team will look at it manually.}

[46-HA]

Hello Jaumix3,

Did you fill out the verification form? I can't find anything under your GitHub handle. Also, we only give out $50 for tutorial projects.

Here are ways you can get the cost down:

• Select PCBA for only two boards rather than all 5. You will still receive all 5, but only two will have components.
• Select green soldermask and leaded HASL finish
• Make sure as many parts as possible are "Basic" or "Preferred Extended" parts; these parts have the $3 assembly fee waived. Here is the list: https://jlcpcb.com/parts/basic_parts
• Use a coupon by JLCPCB for a minor price reduction

If the cost still ends up above $100, DM me on Slack (@hussein) and I can help you pay the remainder with your own card.

[Jaumix3]

Hi!
Yes, I did the verification form, I probably did a mistake while filling out all the information.
Do you want me to repeat the legacy form?

Thanks

[46-HA]

Can you fill this out and tell me when you're done?
Make sure you add your GitHub username in the form
Thanks :)

[Jaumix3]

Hi!
I have filled out the form, thanks for everything, if there's any problem, please tell me, and thanks for what you are doing, you're such a Greate comunity <3.