exynos-drm: add 85.5MHz pixel clock HDMI PHY config for Exynos4412 #63

dsd · 2014-10-09T21:39:43Z

Configuration details from Samsung. This enables 1366x768@60Hz,
which also needs the horizontal blanking hack to work around a
mixer bug, which is now generalized to just look at vertical
resolution.

Signed-off-by: Daniel Drake drake@endlessm.com

Configuration details from Samsung. This enables 1366x768@60Hz, which also needs the horizontal blanking hack to work around a mixer bug, which is now generalized to just look at vertical resolution. Signed-off-by: Daniel Drake <drake@endlessm.com>

exynos-drm: add 85.5MHz pixel clock HDMI PHY config for Exynos4412

mdrjr · 2014-10-10T01:15:23Z

Thank you so much Daniel :)

…er() commit 894f2fc upstream. When unexpected situation happened (e.g. tx/rx irq happened while DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL pointer dereference like the followings: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: usb_f_acm u_serial g_serial libcomposite CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63 Hardware name: Generic R8A7790 (Flattened Device Tree) task: c0729c00 ti: c0724000 task.ti: c0724000 PC is at 0x0 LR is at usbhsf_pkt_handler+0xac/0x118 pc : [<00000000>] lr : [<c03257e0>] psr: 60000193 sp : c0725db8 ip : 00000000 fp : c0725df4 r10: 00000001 r9 : 00000193 r8 : ef3ccab4 r7 : ef3cca10 r6 : eea4586c r5 : 00000000 r4 : ef19ceb4 r3 : 00000000 r2 : 0000009c r1 : c0725dc4 r0 : ef19ceb4 This patch adds a condition to avoid the dereference. Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1c7de2b upstream. There is at least one Chelsio 10Gb card which uses VPD area to store some non-standard blocks (example below). However pci_vpd_size() returns the length of the first block only assuming that there can be only one VPD "End Tag". Since 4e1a635 ("vfio/pci: Use kernel VPD access functions"), VFIO blocks access beyond that offset, which prevents the guest "cxgb3" driver from probing the device. The host system does not have this problem as its driver accesses the config space directly without pci_read_vpd(). Add a quirk to override the VPD size to a bigger value. The maximum size is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h. We do not read the tag as the cxgb3 driver does as the driver supports writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes boundary. The quirk is registered for all devices supported by the cxgb3 driver. This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3 driver itself accesses VPD directly and the problem only exists with the vfio-pci driver (when cxgb3 is not running on the host and may not be even loaded) which blocks accesses beyond the first block of VPD data. However vfio-pci itself does not have quirks mechanism so we add it to PCI. This is the controller: Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030] This is what I parsed from its VPD: === b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K' 0000 Large item 42 bytes; name 0x2 Identifier String b'10 Gigabit Ethernet-SR PCI Express Adapter' 002d Large item 74 bytes; name 0x10 #00 [EC] len=7: b'D76809 ' #0a [FN] len=7: b'46K7897' hardkernel#14 [PN] len=7: b'46K7897' #1e [MN] len=4: b'1037' hardkernel#25 [FC] len=4: b'5769' #2c [SN] len=12: b'YL102035603V' #3b [NA] len=12: b'00145E992ED1' 007a Small item 1 bytes; name 0xf End Tag 0c00 Large item 16 bytes; name 0x2 Identifier String b'S310E-SR-X ' 0c13 Large item 234 bytes; name 0x10 #00 [PN] len=16: b'TBD ' hardkernel#13 [EC] len=16: b'110107730D2 ' hardkernel#26 [SN] len=16: b'97YL102035603V ' hardkernel#39 [NA] len=12: b'00145E992ED1' hardkernel#48 [V0] len=6: b'175000' hardkernel#51 [V1] len=6: b'266666' #5a [V2] len=6: b'266666' hardkernel#63 [V3] len=6: b'2000 ' #6c [V4] len=2: b'1 ' hardkernel#71 [V5] len=6: b'c2 ' #7a [V6] len=6: b'0 ' hardkernel#83 [V7] len=2: b'1 ' hardkernel#88 [V8] len=2: b'0 ' #8d [V9] len=2: b'0 ' hardkernel#92 [VA] len=2: b'0 ' hardkernel#97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0d00 Large item 252 bytes; name 0x11 #00 [VC] len=16: b'122310_1222 dp ' hardkernel#13 [VD] len=16: b'610-0001-00 H1\x00\x00' hardkernel#26 [VE] len=16: b'122310_1353 fp ' hardkernel#39 [VF] len=16: b'610-0001-00 H1\x00\x00' #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0dff Small item 0 bytes; name 0xf End Tag 10f3 Large item 13315 bytes; name 0x62 !!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00' === Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 889b331 upstream. A use of uninitialized memory in msgctl_down() because msqid64 in ksys_msgctl hasn't been initialized. The local | msqid64 | is created in ksys_msgctl() and then passed into msgctl_down(). Along the way msqid64 is never initialized before msgctl_down() checks msqid64->msg_qbytes. KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool) reports: ================================================================== BUG: KUMSAN: use of uninitialized memory in msgctl_down+0x94/0x300 Read of size 8 at addr ffff88806bb97eb8 by task syz-executor707/2022 CPU: 0 PID: 2022 Comm: syz-executor707 Not tainted 5.2.0-rc4+ hardkernel#63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x75/0xae __kumsan_report+0x17c/0x3e6 kumsan_report+0xe/0x20 msgctl_down+0x94/0x300 ksys_msgctl.constprop.14+0xef/0x260 do_syscall_64+0x7e/0x1f0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x4400e9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd869e0598 EFLAGS: 00000246 ORIG_RAX: 0000000000000047 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004400e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000246 R12: 0000000000401970 R13: 0000000000401a00 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:ffffea0001aee5c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000000() raw: 0100000000000000 0000000000000000 ffffffff01ae0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kumsan: bad access detected ================================================================== Syzkaller reproducer: msgctl$IPC_RMID(0x0, 0x0) C reproducer: // autogenerated by syzkaller (https://github.com/google/syzkaller) int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); syscall(__NR_msgctl, 0, 0, 0); return 0; } [natechancellor@gmail.com: adjust indentation in ksys_msgctl] Link: ClangBuiltLinux#829 Link: http://lkml.kernel.org/r/20191218032932.37479-1-natechancellor@gmail.com Link: http://lkml.kernel.org/r/20190613014044.24234-1-shuaibinglu@126.com Signed-off-by: Lu Shuaibing <shuaibinglu@126.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: NeilBrown <neilb@suse.com> From: Andrew Morton <akpm@linux-foundation.org> Subject: ipc/msg.c: consolidate all xxxctl_down() functions Each line here overflows 80 cols by exactly one character. Delete one tab per line to fix. Cc: Shaohua Li <shli@fb.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e1de943 ] Recent work with KASan exposed the folling hard-coded bitmask in arch/arm/mm/proc-macros.S: bic rd, sp, #8128 bic rd, rd, #63 This forms the bitmask 0x1FFF that is coinciding with (PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming that THREAD_SIZE is always 8K (8192). As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into this bug. Fix it by this little oneline suggested by Ard: bic rd, sp, #(THREAD_SIZE - 1) & ~63 Where THREAD_SIZE is defined using THREAD_SIZE_ORDER. We have to also include <linux/const.h> since the THREAD_SIZE expands to use the _AC() macro. Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6ce708f ] Large pkt_len can lead to out-out-bound memcpy. Current ath9k_hif_usb_rx_stream allows combining the content of two urb inputs to one pkt. The first input can indicate the size of the pkt. Any remaining size is saved in hif_dev->rx_remain_len. While processing the next input, memcpy is used with rx_remain_len. 4-byte pkt_len can go up to 0xffff, while a single input is 0x4000 maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE. BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 hardkernel#63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 Workqueue: events request_firmware_work_func Call Trace: <IRQ> dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] __kasan_report.cold+0x37/0x7c ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] kasan_report+0xe/0x20 check_memory_region+0x15a/0x1d0 memcpy+0x20/0x50 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc] ? _raw_spin_lock_irqsave+0x7b/0xd0 ? _raw_spin_trylock_bh+0x120/0x120 ? __usb_unanchor_urb+0x12f/0x210 __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 I found the bug using a custome USBFuzz port. It's a research work to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only, providing hand-crafted usb descriptors to QEMU. After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU emulation, I found the KASAN report. The bug is triggerable whenever pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes to test the driver works when applying the patch. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6ce708f ] Large pkt_len can lead to out-out-bound memcpy. Current ath9k_hif_usb_rx_stream allows combining the content of two urb inputs to one pkt. The first input can indicate the size of the pkt. Any remaining size is saved in hif_dev->rx_remain_len. While processing the next input, memcpy is used with rx_remain_len. 4-byte pkt_len can go up to 0xffff, while a single input is 0x4000 maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE. BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 Workqueue: events request_firmware_work_func Call Trace: <IRQ> dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] __kasan_report.cold+0x37/0x7c ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] kasan_report+0xe/0x20 check_memory_region+0x15a/0x1d0 memcpy+0x20/0x50 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc] ? _raw_spin_lock_irqsave+0x7b/0xd0 ? _raw_spin_trylock_bh+0x120/0x120 ? __usb_unanchor_urb+0x12f/0x210 __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 I found the bug using a custome USBFuzz port. It's a research work to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only, providing hand-crafted usb descriptors to QEMU. After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU emulation, I found the KASAN report. The bug is triggerable whenever pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes to test the driver works when applying the patch. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6594669 ] The coreboot_table driver registers a coreboot bus while probing a "coreboot_table" device representing the coreboot table memory region. Probing this device (i.e., registering the bus) is a dependency for the module_init() functions of any driver for this bus (e.g., memconsole-coreboot.c / memconsole_driver_init()). With synchronous probe, this dependency works OK, as the link order in the Makefile ensures coreboot_table_driver_init() (and thus, coreboot_table_probe()) completes before a coreboot device driver tries to add itself to the bus. With asynchronous probe, however, coreboot_table_probe() may race with memconsole_driver_init(), and so we're liable to hit one of these two: 1. coreboot_driver_register() eventually hits "[...] the bus was not initialized.", and the memconsole driver fails to register; or 2. coreboot_driver_register() gets past #1, but still races with bus_register() and hits some other undefined/crashing behavior (e.g., in driver_find() [1]) We can resolve this by registering the bus in our initcall, and only deferring "device" work (scanning the coreboot memory region and creating sub-devices) to probe(). [1] Example failure, using 'driver_async_probe=*' kernel command line: [ 0.114217] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... [ 0.114307] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc1 #63 [ 0.114316] Hardware name: Google Scarlet (DT) ... [ 0.114488] Call trace: [ 0.114494] _raw_spin_lock+0x34/0x60 [ 0.114502] kset_find_obj+0x28/0x84 [ 0.114511] driver_find+0x30/0x50 [ 0.114520] driver_register+0x64/0x10c [ 0.114528] coreboot_driver_register+0x30/0x3c [ 0.114540] memconsole_driver_init+0x24/0x30 [ 0.114550] do_one_initcall+0x154/0x2e0 [ 0.114560] do_initcall_level+0x134/0x160 [ 0.114571] do_initcalls+0x60/0xa0 [ 0.114579] do_basic_setup+0x28/0x34 [ 0.114588] kernel_init_freeable+0xf8/0x150 [ 0.114596] kernel_init+0x2c/0x12c [ 0.114607] ret_from_fork+0x10/0x20 [ 0.114624] Code: 5280002b 1100054a b900092a f9800011 (885ffc01) [ 0.114631] ---[ end trace 0000000000000000 ]--- Fixes: b81e314 ("firmware: coreboot: Make bus registration symmetric") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20221019180934.1.If29e167d8a4771b0bf4a39c89c6946ed764817b9@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…together commit e531e90 upstream. Running endpoint security solutions like Sentinel1 that use perf-based tracing heavily lead to this repeated dump complaining about dockerd. The default value of 2048 is nowhere near not large enough. Using the prior patch "tracing: show size of requested buffer", we get "perf buffer not large enough, wanted 6644, have 6144", after repeated up-sizing (I did 2/4/6/8K). With 8K, the problem doesn't occur at all, so below is the trace for 6K. I'm wondering if this value should be selectable at boot time, but this is a good starting point. ``` ------------[ cut here ]------------ perf buffer not large enough, wanted 6644, have 6144 WARNING: CPU: 1 PID: 4997 at kernel/trace/trace_event_perf.c:402 perf_trace_buf_alloc+0x8c/0xa0 Modules linked in: [..] CPU: 1 PID: 4997 Comm: sh Tainted: G T 5.13.13-x86_64-00039-gb3959163488e #63 Hardware name: LENOVO 20KH002JUS/20KH002JUS, BIOS N23ET66W (1.41 ) 09/02/2019 RIP: 0010:perf_trace_buf_alloc+0x8c/0xa0 Code: 80 3d 43 97 d0 01 00 74 07 31 c0 5b 5d 41 5c c3 ba 00 18 00 00 89 ee 48 c7 c7 00 82 7d 91 c6 05 25 97 d0 01 01 e8 22 ee bc 00 <0f> 0b 31 c0 eb db 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 55 89 RSP: 0018:ffffb922026b7d58 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9da5ee012000 RCX: 0000000000000027 RDX: ffff9da881657828 RSI: 0000000000000001 RDI: ffff9da881657820 RBP: 00000000000019f4 R08: 0000000000000000 R09: ffffb922026b7b80 R10: ffffb922026b7b78 R11: ffffffff91dda688 R12: 000000000000000f R13: ffff9da5ee012108 R14: ffff9da8816570a0 R15: ffffb922026b7e30 FS: 00007f420db1a080(0000) GS:ffff9da881640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 00000002504a8006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kprobe_perf_func+0x11e/0x270 ? do_execveat_common.isra.0+0x1/0x1c0 ? do_execveat_common.isra.0+0x5/0x1c0 kprobe_ftrace_handler+0x10e/0x1d0 0xffffffffc03aa0c8 ? do_execveat_common.isra.0+0x1/0x1c0 do_execveat_common.isra.0+0x5/0x1c0 __x64_sys_execve+0x33/0x40 do_syscall_64+0x6b/0xc0 ? do_syscall_64+0x11/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f420dc1db37 Code: ff ff 76 e7 f7 d8 64 41 89 00 eb df 0f 1f 80 00 00 00 00 f7 d8 64 41 89 00 eb dc 0f 1f 84 00 00 00 00 00 b8 3b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 01 43 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd4e8b4e38 EFLAGS: 00000246 ORIG_RAX: 000000000000003b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f420dc1db37 RDX: 0000564338d1e740 RSI: 0000564338d32d50 RDI: 0000564338d28f00 RBP: 0000564338d28f00 R08: 0000564338d32d50 R09: 0000000000000020 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000564338d28f00 R13: 0000564338d32d50 R14: 0000564338d1e740 R15: 0000564338d28c60 ---[ end trace 83ab3e8e16275e49 ]--- ``` Link: https://lkml.kernel.org/r/20210831043723.13481-2-robbat2@gentoo.org Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mdrjr added a commit that referenced this pull request Oct 10, 2014

Merge pull request #63 from dsd/odroid-3.8.y

3bcdf52

exynos-drm: add 85.5MHz pixel clock HDMI PHY config for Exynos4412

mdrjr merged commit 3bcdf52 into hardkernel:odroid-3.8.y Oct 10, 2014

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

exynos-drm: add 85.5MHz pixel clock HDMI PHY config for Exynos4412 #63

exynos-drm: add 85.5MHz pixel clock HDMI PHY config for Exynos4412 #63

dsd commented Oct 9, 2014

mdrjr commented Oct 10, 2014

exynos-drm: add 85.5MHz pixel clock HDMI PHY config for Exynos4412 #63

exynos-drm: add 85.5MHz pixel clock HDMI PHY config for Exynos4412 #63

Conversation

dsd commented Oct 9, 2014

mdrjr commented Oct 10, 2014