Acceptance-Unit Test Cycle

In this assignment you will use a combination of Acceptance and Units tests with the Cucumber and RSpec tools to add a "find movies with same director" feature to RottenPotatoes.

NOTE: Do not clone this repo to your workspace. Fork it first, then clone your fork.

Learning Goals

After you complete this assignment, you should be able to:

• Create and run simple Cucumber scenarios to test a new feature
• Use RSpec to create unit tests that drive the creation of app code that lets the Cucumber scenario pass
• Understand where to modify a Rails app to implement the various parts of a new feature, since a new feature often touches the database schema, model(s), view(s), and controller(s)

Introduction and Setup

To get the initial RottenPotatoes code please clone your fork of this repo to your local machine or C9 workspace, and execute the following command in your top level projects directory, or the root of your C9 workspace:

$ git clone https://github.com/YOUR_GITHUB_USERNAME/hw-acceptance-unit-test-cycle

Once you have the clone of the repo:

1. Change into the rottenpotatoes directory: cd hw-acceptance-unit-test-cycle/rottenpotatoes
2. Run bundle install --without production to make sure all gems are properly installed.
3. Run

bundle exec rake db:migrate
bundle exec rake db:test:prepare

to apply database migrations.

4. Create a new file called rspec.rb in features/support with the following contents:

require 'rspec/core'

RSpec.configure do |config|
  config.mock_with :rspec do |c|
    c.syntax = [:should, :expect]
  end
  config.expect_with :rspec do |c|
    c.syntax = [:should, :expect]
  end
end

This prevents RSpec from issuing DEPRECATION warnings when it encounters deprecated syntax in features/step_definitions/web_steps.

5. You can double-check if everything was installed by running the tasks rspec and cucumber.

Part 1: add a Director field to Movies

Create and apply a migration that adds the Director field to the movies table. The director field should be a string containing the name of the movie’s director. HINT: use the add_column method of ActiveRecord::Migration to do this.

Remember to add :director to the list of movie attributes in the def movie_params method in movies_controller.rb.

Remember that once the migration is applied, you also have to do rake db:test:prepare to load the new post-migration schema into the test database!

Part 2: use Acceptance and Unit tests to get new scenarios passing

We've provided three Cucumber scenarios to drive creation of the happy path of Search for Movies by Director. The first lets you add director info to an existing movie, and doesn't require creating any new views or controller actions (but does require modifying existing views, and will require creating a new step definition and possibly adding a line or two to features/support/paths.rb).

Three Scenarios:

Feature: search for movies by director

  As a movie buff
  So that I can find movies with my favorite director
  I want to include and serach on director information in movies I enter

Background: movies in database

  Given the following movies exist:
  | title        | rating | director     | release_date |
  | Star Wars    | PG     | George Lucas |   1977-05-25 |
  | Blade Runner | PG     | Ridley Scott |   1982-06-25 |
  | Alien        | R      |              |   1979-05-25 |
  | THX-1138     | R      | George Lucas |   1971-03-11 |

Scenario: add director to existing movie
  When I go to the edit page for "Alien"
  And  I fill in "Director" with "Ridley Scott"
  And  I press "Update Movie Info"
  Then the director of "Alien" should be "Ridley Scott"

Scenario: find movie with same director
  Given I am on the details page for "Star Wars"
  When  I follow "Find Movies With Same Director"
  Then  I should be on the Similar Movies page for "Star Wars"
  And   I should see "THX-1138"
  But   I should not see "Blade Runner"

Scenario: can't find similar movies if we don't know director (sad path)
  Given I am on the details page for "Alien"
  Then  I should not see "Ridley Scott"
  When  I follow "Find Movies With Same Director"
  Then  I should be on the home page
  And   I should see "'Alien' has no director info"

The second lets you click a new link on a movie details page "Find Movies With Same Director", and shows all movies that share the same director as the displayed movie.
For this you'll have to modify the existing Show Movie view, and you'll have to add a route, view and controller method for Find With Same Director.

The third handles the sad path, when the current movie has no director info but we try to do "Find with same director" anyway.

Going one Cucumber step at a time, use RSpec to create the appropriate controller and model specs to drive the creation of the new controller and model methods. At the least, you will need to write tests to drive the creation of:

• a RESTful route for Find Similar Movies (HINT: use the 'match' syntax for routes as suggested in "Non-Resource-Based Routes" in Section 4.1 of ESaaS). You can also use the key :as to specify a name to generate helpers (i.e. search_directors_path) http://guides.rubyonrails.org/routing.html Note: you probably won’t test this directly in rspec, but a line in Cucumber or rspec will fail if the route is not correct.

• a controller method to receive the click on "Find With Same Director", and grab the id (for example) of the movie that is the subject of the match (i.e. the one we're trying to find movies similar to)

• a model method in the Movie model to find movies whose director matches that of the current movie. Note: This implies that you should write at least 2 specs for your controller: 1) When the specified movie has a director, it should... 2) When the specified movie has no director, it should ... and 2 for your model: 1) it should find movies by the same director and 2) it should not find movies by different directors.

It's up to you to decide whether you want to handle the sad path of "no director" in the controller method or in the model method, but you must provide a test for whichever one you do. Remember to include the line require 'rails_helper' at the top of your *_spec.rb files.

We want you to report your code coverage as well.

Add gem 'simplecov', :require => false to the test group of your gemfile, then run bundle install --without production.

Next, add the following code BEFORE ANYTHING ELSE ON LINE ONE of spec/rails_helper.rb and features/support/env.rb:

require 'simplecov'
SimpleCov.start 'rails'

WARNING: THE ABOVE CODE MUST COME BEFORE ALL OTHER CODE in spec/rails_helper.rb and features/support/env.rb or YOUR COVERAGE REPORTS WILL BE INACCURATE

Now when you run rspec or cucumber, SimpleCov will generate a report in a directory named coverage/. Since both RSpec and Cucumber are so widely used, SimpleCov can intelligently merge the results, so running the tests for Rspec does not overwrite the coverage results from SimpleCov and vice versa.

To see the results, open /coverage/index.html. You will see the code, but click the Run button at the top. This will spin up a web server with a link in the console you can click to see your coverage report.

Improve your test coverage by adding unit tests for untested or undertested code.

Submission:

Here are the instructions for submitting your assignment for grading. Submit a zip file containing the following files and directories of your app:

• app/
• config/
• db/migrate
• features/
• spec/
• Gemfile
• Gemfile.lock

If you modified any other files, please include them too. If you are on a *nix based system, navigate to the root directory for this assignment and run

$ cd ..
$ zip -r acceptance-tests.zip rottenpotatoes/app/ rottenpotatoes/config/ rottenpotatoes/db/migrate rottenpotatoes/features/ rottenpotatoes/spec/ rottenpotatoes/Gemfile rottenpotatoes/Gemfile.lock

This will create the file acceptance-tests.zip, which you will submit.

IMPORTANT NOTE: Your submission must be zipped inside a rottenpotatoes/ folder so that it looks like so:

$ tree
.
└── rottenpotatoes
    ├── Gemfile
    ├── Gemfile.lock
    ├── app
    ...