need some info

[malikshi]

this firmware needs to work along with your other repo openwrt config right? currently, I am using other firmware but haven't been tweaking for Libernet nor Xderm. can you add xderm as another option for Libernet?

[malikshi]

Your firewall setting really weird.i am add new interface with correct setting, it's connected but no internet access/ still using original isp not via openvpn/l2tp/wireguard. With same setting the other fw work well no issue like that

[helmiau]

this firmware needs to work along with your other repo openwrt config right? currently, I am using other firmware but haven't been tweaking for Libernet nor Xderm. can you add xderm as another option for Libernet?

not at all, i'm only using SSR+/OpenClash/Passwall

[helmiau]

Your firewall setting really weird.i am add new interface with correct setting, it's connected but no internet access/ still using original isp not via openvpn/l2tp/wireguard. With same setting the other fw work well no issue like that

Then you need to reconfigure your firewall instead of mine, because my fw build is built for my daily usage for Load Balancing with 3 ISP USB Modem HiLink

[malikshi]

Can you recommend me good usb modem? Currently I'm using B818 orbitmax

[helmiau]

Can you recommend me good usb modem? Currently I'm using B818 orbitmax

e3372h-607
what connection you use for orbitmax? Usb or LAN?

[malikshi]

direct LAN to rpi4 LAN, for EU 300usb to lan used for AP router

[helmiau]

direct LAN to rpi4 LAN, for EU 300usb to lan used for AP router

i think yours will work if you use external USB to Ethernet hub (as ISP)
so the Pi 4 LAN port will be used for connection to AP

[helmiau]

Moved this issues to discussions page
here for the discussions link

[malikshi]

Rofl. It's not how you're move issues into discussion