Create Raspbian Homebridge Image refs/tags/v1.2.0 #14
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: Create Raspbian Homebridge Image using pi-gen | |
| run-name: Create Raspbian Homebridge Image ${{ github.ref }} | |
| on: | |
| release: | |
| types: [released] | |
| jobs: | |
| tag: | |
| name: Verify Release Tag | |
| runs-on: ubuntu-latest | |
| outputs: | |
| version: ${{ steps.get_version.outputs.version }} | |
| steps: | |
| - name: Get Release Tag | |
| id: get_version | |
| uses: jannemattila/get-version-from-tag@v3 | |
| - name: Tag Info | |
| run: | | |
| echo "Release Tag: ${{github.ref}}" | |
| echo "Latest Tag: ${{ steps.get_version.outputs.version }}" | |
| - name: Tag Info Matches | |
| if: endsWith(github.ref, steps.get_version.outputs.version ) | |
| run: | | |
| echo Latest Tag matches Release tag | |
| - name: Tag Info Doesn't Match | |
| if: ${{ !endsWith(github.ref, steps.get_version.outputs.version ) }} | |
| run: | | |
| echo Latest Tag does not matches Release tag | |
| exit 1 | |
| build_images: | |
| name: Build RPI Homebridge (${{ matrix.name }}) Image ${{ needs.tag.outputs.version }} | |
| needs: tag | |
| runs-on: [ubuntu-latest] | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| name: [ | |
| 64bit, | |
| 32bit | |
| ] | |
| include: | |
| - pi-gen-version: arm64 | |
| release: bookworm | |
| name: 64bit | |
| devices: '["pi5-64bit", "pi4-64bit", "pi3-64bit"]' | |
| - pi-gen-version: master | |
| release: bookworm | |
| name: 32bit | |
| devices: '["pi5-32bit", "pi4-32bit", "pi3-32bit", "pi2-32bit", "pi1-32bit"]' | |
| # The build | |
| steps: | |
| - uses: actions/checkout@v4 | |
| # https://stackoverflow.com/questions/72444103/what-does-running-the-multiarch-qemu-user-static-does-before-building-a-containe | |
| # - name: Setup Dependencies | |
| # run: | | |
| # sudo apt-get update | |
| # sudo apt-get --yes --no-install-recommends install binfmt-support qemu-user-static | |
| # docker run --rm --privileged multiarch/qemu-user-static:register --reset | |
| # f022813 aka 1.7.0 | |
| - uses: usimd/pi-gen-action@f022813e54a67d9f8fe8a6a6d620a5da3739a632 | |
| name: Run pi-gen ( get some popcorn this will take awhile ) | |
| id: build | |
| with: | |
| # Compression to apply on final image (either "none", "zip", "xz" or "gz"). | |
| compression: zip | |
| # Compression level to be used. From 0 to 9 (refer to the tool man page for more | |
| # information on this. Usually 0 is no compression but very fast, up to 9 with the | |
| # best compression but very slow). | |
| compression-level: 6 | |
| # Disable the renaming of the first user during the first boot. This make it so | |
| # 'username' stays activated. 'username' must be set for this to work. Please be | |
| # aware of the implied security risk of defining a default username and password | |
| # for your devices. | |
| disable-first-boot-user-rename: 1 | |
| # Additional options to include in PIGEN_DOCKER_OPTS | |
| # '--env IMG_DATE=Raspbian' | |
| docker-opts: '--env BUILD_VERSION="${{ github.repository }}-${{ needs.tag.outputs.version }}-\(${{ matrix.name }}\)"' | |
| # Set whether a NOOBS image should be built as well. If enabled, the output | |
| # directory containing the NOOBS files will be saved as output variable | |
| # 'image-noobs-path'. | |
| enable-noobs: false | |
| # Enable SSH access to Pi. | |
| enable-ssh: 1 | |
| # If this feature is enabled, the action will configure pi-gen to not export any | |
| # stage as image but the last one defined in property 'stage-list'. This is | |
| # helpful when building a single image flavor (in contrast to building a | |
| # lite/server and full-blown desktop image), since it speeds up the build process | |
| # significantly. | |
| export-last-stage-only: true | |
| # Comma or whitespace separated list of additional packages to install on host | |
| # before running pi-gen. Use this list to add any packages your custom stages may | |
| # require. Note that this is not affecting the final image. In order to add | |
| # additional packages, you need to add a respective 'XX-packages' file in your | |
| # custom stage. | |
| extra-host-dependencies: '' | |
| # Comma or whitespace separated list of additional modules to load on host before | |
| # running pi-gen. If your custom stage requires additional software or kernel | |
| # modules to be loaded, add them here. Note that this is not meant to configure | |
| # modules to be loaded in the target image. | |
| extra-host-modules: '' | |
| # Token to use for checking out pi-gen repo. | |
| github-token: ${{ github.token }} | |
| # Host name of the image. | |
| hostname: homebridge | |
| # Final image name. | |
| image-name: 'Homebridge-${{ matrix.release }}-${{ matrix.name }}' | |
| # Default keyboard keymap. | |
| keyboard-keymap: gb | |
| # Default keyboard layout. | |
| keyboard-layout: English (UK) | |
| # Default locale of the system image. | |
| locale: en_GB.UTF-8 | |
| # Password of the intial user account, locked if empty. | |
| password: 'raspberry' | |
| # Path where selected pi-gen ref will be checked out to. If the path does not yet | |
| # exist, it will be created (including its parents). | |
| pi-gen-dir: pi-gen | |
| # GitHub repository to fetch pi-gen from, must be a fork from RPi-Distro/pi-gen. | |
| pi-gen-repository: RPi-Distro/pi-gen | |
| # Release version of pi-gen to use. This can both be a branch or tag name known in | |
| # the pi-gen repository. | |
| pi-gen-version: ${{ matrix.pi-gen-version }} | |
| # The release version to build images against. Valid values are jessie, stretch, | |
| # buster, bullseye, bookworm, and testing. | |
| release: ${{ matrix.release }} | |
| # Setting to `1` will prevent pi-gen from dropping the "capabilities" feature. | |
| # Generating the root filesystem with capabilities enabled and running it from a | |
| # filesystem that does not support capabilities (like NFS) can cause issues. Only | |
| # enable this if you understand what it is. | |
| setfcap: '' | |
| # List of stage name to execute in given order. Relative and absolute paths to | |
| # custom stage directories are allowed here. Note that by default pi-gen exports | |
| # images in stage2 (lite), stage4 and stage5. You probably want to hook in custom | |
| # stages before one of the exported stages. Otherwise, the action will make sure | |
| # any custom stage will include an image export directive. | |
| stage-list: stage0 stage1 stage2 ./stage3_homebridge | |
| # System timezone. | |
| timezone: Europe/London | |
| # Use qcow2 images to reduce space and runtime requirements. | |
| use-qcow2: 0 | |
| # Name of the initial user account. | |
| username: pi | |
| # Print all output from pi-gen. | |
| verbose-output: false | |
| # Wifi country code of default network to connect to. | |
| wpa-country: '' | |
| # SSID of a default wifi network to connect to. | |
| wpa-essid: '' | |
| # Password of default wifi network to connect to. | |
| wpa-password: '' | |
| # This is not currently used | |
| - name: Calculate Image Checksum | |
| id: get_sha256_checksum | |
| run: | | |
| export IMGFILENAME=`basename ${{ steps.build.outputs.image-path }}` | |
| echo "IMGFILENAME=${IMGFILENAME}" >> $GITHUB_ENV | |
| export IMAGE_SHA256_CHECKSUM=$(shasum -a 256 ${{ steps.build.outputs.image-path }} | awk '{print $1}') | |
| echo "$IMAGE_SHA256_CHECKSUM ${{ steps.build.outputs.image-path }}" | |
| echo "::notice::IMAGE_SHA256_CHECKSUM ${IMGFILENAME} ==> ${IMAGE_SHA256_CHECKSUM}" | |
| - name: Upload Image to release v${{ needs.tag.outputs.version }} | |
| uses: AButler/upload-release-assets@v2.0.2 | |
| with: | |
| files: '${{ steps.build.outputs.image-path }}' | |
| repo-token: ${{ secrets.GITHUB_TOKEN }} | |
| release-tag: v${{ needs.tag.outputs.version }} | |
| - name: Generate rpi-image-repo.json | |
| id: generate_rpi-image-repo | |
| run: | | |
| export RPI_IMAGER_NAME="Homebridge ${{ matrix.release }} (${{ matrix.name }})" | |
| export RPI_IMAGER_DESCRIPTION="Official Homebridge Raspberry Pi Image ${{ matrix.release }} (${{ matrix.name }})" | |
| export RPI_IMAGER_ICON="https://user-images.githubusercontent.com/3979615/116509191-3c35f880-a906-11eb-9a7f-7cad7c2aa641.png" | |
| export RPI_IMAGER_WEBSITE="https://github.com/homebridge/homebridge-raspbian-image/wiki/Getting-Started" | |
| export RPI_IMAGER_IMAGE_URL="https://github.com/${{ github.repository }}/releases/download/${{ needs.tag.outputs.version }}/${{ env.IMGFILENAME }}" | |
| export RPI_IMAGER_DEVICES='${{ matrix.devices }}' | |
| ./make_rpi-imager-snipplet.py --rpi_imager_url ${RPI_IMAGER_IMAGE_URL} | |
| - name: Rename rpi-image-repo to ./rpi-image-repo-${{ matrix.name }}.json | |
| run: | | |
| mv pi-gen/deploy/rpi-image-repo.json ./rpi-image-repo-${{ matrix.name }}.json | |
| - name: Upload Info to release ${{ needs.tag.outputs.version }} | |
| uses: AButler/upload-release-assets@v2.0.2 | |
| with: | |
| files: './*.json' | |
| repo-token: ${{ secrets.GITHUB_TOKEN }} | |
| release-tag: v${{ needs.tag.outputs.version }} | |
| finalize_info: | |
| name: Prep ${{ needs.tag.outputs.version }} Info file | |
| needs: [tag, build_images] | |
| runs-on: [ubuntu-latest] | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - uses: robinraju/release-downloader@v1.8 | |
| name: Downloard image info files from release ${{ needs.tag.outputs.version }} | |
| with: | |
| # The github tag. e.g: v1.0.1 | |
| # Download assets from a specific tag/version | |
| tag: v${{ needs.tag.outputs.version }} | |
| # The name of the file to download. | |
| # Use this field only to specify filenames other than tarball or zipball, if any. | |
| # Supports wildcard pattern (eg: '*', '*.deb', '*.zip' etc..) | |
| fileName: "*.json" | |
| - name: Combine rpi-image-repo JSON's | |
| run: | | |
| ./combine-rpi-imager-snipplet.py | |
| - name: Upload combined rpi-image-repo to release ${{ needs.tag.outputs.version }} | |
| uses: AButler/upload-release-assets@v2.0.2 | |
| with: | |
| files: 'rpi-image-repo.json' | |
| repo-token: ${{ secrets.GITHUB_TOKEN }} | |
| release-tag: v${{ needs.tag.outputs.version }} | |
| - name: Push ${{ needs.tag.outputs.version }} Image to Homebridge Registry | |
| uses: dmnemec/copy_file_to_another_repo_action@main | |
| env: | |
| API_TOKEN_GITHUB: ${{ secrets.API_TOKEN_GITHUB }} | |
| with: | |
| source_file: 'rpi-image-repo.json' | |
| destination_repo: 'homebridge/homebridge.io' | |
| destination_branch: 'source' | |
| destination_folder: 'src/public/' | |
| user_email: 'github-actions[bot]@users.noreply.github.com' | |
| user_name: 'github-actions[bot]' | |
| commit_message: 'New Homebridge Image Release ${{ needs.tag.outputs.version }}' | |
| github-releases-to-discord: | |
| needs: [tag, build_images, finalize_info] | |
| uses: homebridge/.github/.github/workflows/discord-webhooks.yml@latest | |
| with: | |
| title: "Homebridge Raspbian Image Release" | |
| description: | | |
| Version `v${{ needs.tag.outputs.version }}` | |
| url: "https://github.com/homebridge/homebridge-raspbian-image/releases/tag/v${{ needs.tag.outputs.version }}" | |
| secrets: | |
| DISCORD_WEBHOOK: ${{ secrets.DISCORD_WEBHOOK_URL_LATEST }} |