!!! Development moved to GitLab !!!

RISA - Rofex In-Situ Analysis

Documentation to be found at: https://hzdr-fwdf.github.io/RISA/index.html

Prerequisites:

• cmake (>= 3.5)
• CUDA and compatible host compiler (e.g. gcc)
• libconfig++
• Boost (>= 1.58)
• LibTiff

Installation on Ubuntu 16.04

• install libConfig: sudo apt-get install libconfig++-dev
• install cmake: sudo apt-get install cmake cmake-curses-gui
• install boost: sudo apt-get install libboost-all-dev
• install libtiff: sudo apt-get install libtiff5-dev
• install CUDA (download from NVIDIA homepage: https://developer.nvidia.com/cuda-toolkit and follow the instructions)
• in order to build the documentation, doxygen and graphviz need to be installed sudo apt install doxygen graphviz

Building the software:

• If the software is built for another CUDA device architecture, this architecture needs to be added in the top-level CmakeLists.txt
• create a new path, outside of src-directory, called e.g. 'build'
• move into this path and enter following command in terminal: ccmake <path_to_src> e.g. ccmake ../RISA/.
• check if everything could be found and enter CMAKE_BUILD_TYPE, options are: Debug, RelWithDebInfo, Release
• if everything worked out, make the project make -j all
• if build was successful, there is an executable in the build/bin folder
• the documentation can be found in the doc/html folder

Running the software:

• first the configuration file in the example directory needs to be adapted. Especially the paths to the input data.
• the software can be invoked by issuing the following command: ./example <path_to_configuration_file>