Merge pull request #277 from alibillalhammoud/main

Directions update for Glayout
idea-fasoc · Dec 14, 2023 · 479a51a · 479a51a
2 parents b70f754 + 9102e1c
commit 479a51a
Show file tree

Hide file tree

Showing 8 changed files with 223 additions and 136 deletions.
diff --git a/README.rst b/README.rst
@@ -32,6 +32,9 @@ This project is led by a team of researchers at the University of Michigan and i
     .. image:: https://github.com/idea-fasoc/OpenFASOC/actions/workflows/cryo_gen.yml/badge.svg
         :target: https://github.com/idea-fasoc/OpenFASOC/actions/workflows/cryo_gen.yml
 
+* **Glayout Generators -**
+    `Installation and Running <https://github.com/idea-fasoc/OpenFASOC/tree/main/openfasoc/generators/gdsfactory-gen/tapeout_and_RL/README.md>`_
+
 
 Getting Started
 ****************
@@ -79,20 +82,21 @@ Below are the tool requirements along with their currently support versions that
 Generators
 ********************
 
-+------------------------------------------+--------------------+----------------------------+----------------------------------------------------------------+
-| Generator                                | Technology nodes   | Supported                  | Documentation                                                  |
-|                                          |                    |                            |                                                                |
-+==========================================+====================+============================+================================================================+
-| Temperature Sensor                       | sky130hd           |    Yes                     | https://openfasoc.readthedocs.io/en/latest/flow-tempsense.html |       
-+------------------------------------------+--------------------+----------------------------+----------------------------------------------------------------+
-| Low dropout Voltage Regulator (LDO)      | sky130hvl          |    Yes                     | https://openfasoc.readthedocs.io/en/latest/flow-ldo.html       |  
-+------------------------------------------+--------------------+----------------------------+----------------------------------------------------------------+ 
-| Cryogenic                                | sky130hs,          |    No (In-progress)        | https://openfasoc.readthedocs.io/en/latest/flow-cryo.html      |                                      
-|                                          | sky130hd,          |                            |                                                                |                        
-|                                          | sky130hvl          |                            |                                                                |                                     
-+------------------------------------------+--------------------+----------------------------+----------------------------------------------------------------+
-| GDSFactory                               | sky130hd           |     No (In-progress)       | https://openfasoc.readthedocs.io/en/latest/flow-ldo.html       |
-+------------------------------------------+--------------------+----------------------------+----------------------------------------------------------------+
++------------------------------------------+--------------------+----------------------------+----------------------------------------------------------------------------------------------------------------+
+| Generator                                | Technology nodes   | Supported                  | Documentation                                                                                                  |
+|                                          |                    |                            |                                                                                                                |
++==========================================+====================+============================+================================================================================================================+
+| Temperature Sensor                       | sky130hd           |    Yes                     | https://openfasoc.readthedocs.io/en/latest/flow-tempsense.html                                                 |       
++------------------------------------------+--------------------+----------------------------+----------------------------------------------------------------------------------------------------------------+
+| Low dropout Voltage Regulator (LDO)      | sky130hvl          |    Yes                     | https://openfasoc.readthedocs.io/en/latest/flow-ldo.html                                                       |  
++------------------------------------------+--------------------+----------------------------+----------------------------------------------------------------------------------------------------------------+ 
+| Cryogenic                                | sky130hs,          |    No (In-progress)        | https://openfasoc.readthedocs.io/en/latest/flow-cryo.html                                                      |                                      
+|                                          | sky130hd,          |                            |                                                                                                                |                        
+|                                          | sky130hvl          |                            |                                                                                                                |                                     
++------------------------------------------+--------------------+----------------------------+----------------------------------------------------------------------------------------------------------------+
+| Glayout                                  | sky130,            |     Yes                    | https://github.com/idea-fasoc/OpenFASOC/tree/main/openfasoc/generators/gdsfactory-gen/tapeout_and_RL/README.md |
+|                                          | gf180              |                            |                                                                                                                |
++------------------------------------------+--------------------+----------------------------+----------------------------------------------------------------------------------------------------------------+
 
 
 Tapeouts and testing setup

diff --git a/openfasoc/generators/gdsfactory-gen/glayout/components/opamp.py b/openfasoc/generators/gdsfactory-gen/glayout/components/opamp.py
@@ -135,7 +135,7 @@ def __add_output_stage(
 def opamp_netlist(two_stage_netlist: Netlist, output_stage_netlist: Netlist) -> Netlist:
     top_level_netlist = Netlist(
         circuit_name="opamp",
-        nodes=['gnd', 'CSoutput', 'output', 'vdd', 'plus', 'minus', 'commonsourceibias', 'outputibias', 'diffpairibias']
+        nodes=["CSoutput", "vdd", "plus", "minus", "commonsourceibias", "outputibias", "diffpairibias", "gnd", "output"]
     )
 
     top_level_netlist.connect_netlist(

diff --git a/openfasoc/generators/gdsfactory-gen/glayout/requirements.txt b/openfasoc/generators/gdsfactory-gen/glayout/requirements.txt
@@ -0,0 +1,2 @@
+gf180
+prettyprinttree
diff --git a/openfasoc/generators/gdsfactory-gen/tapeout_and_RL/README.md b/openfasoc/generators/gdsfactory-gen/tapeout_and_RL/README.md
@@ -1,26 +1,51 @@
+# Installation and Getting Started
+These generators require python version >= 3.10  
+## Installing Layout Tools
+All layout dependencies can be installed with pip (the official python package manager). From here you can generate layouts with [Glayout](https://github.com/idea-fasoc/OpenFASOC/blob/main/openfasoc/generators/gdsfactory-gen/glayout/README.md#glayout).  
+
+```
+python3 -m pip install -r requirements.txt
+python3 -m pip install gdsfactory==7.7.0
+```
+**After installing python packages, you can test with:**  
+`python3 sky130_nist_tapeout.py gen_opamp --output_gds test1.gds`  
+This will create an opamp called "test1.gds"
+
+## Installing Simulation Tools
+A full install of these tools has only been verified on Linux platforms
+- [Skywater 130nm Open PDK](https://github.com/RTimothyEdwards/open_pdks)
+- [Magic](http://opencircuitdesign.com/magic/install.html)
+- [ngspice](https://ngspice.sourceforge.io/download.html) 
+- **Optional**: [Klayout](https://www.klayout.de/build.html)
+
+**After a full install, you can test with:**  
+`python3 sky130_nist_tapeout.py test --output_dir test`  
+This will create an opamp, extract, and simulate, then dump all outputs to a new "test" directory
+
 # sky130 NIST Tapeout Macros
-This directory contains the `sky130_nist_tapeout.py` file which is a python program containing all functions and utils neccessary to produce the circuits, simulation info, and statistics used in the sky130 NIST tapeout.  
+The `sky130_nist_tapeout.py` file is a python program using the Glayout API to produce the OPAMPS included in the sky130 NIST nanofabrication tapeout. This file also produces simulation info, statistics, and other useful macro functions for the tapeout.  
 `sky130_nist_tapeout.py` has a command line interface. use the `-h` option to see all args for this program. help output is replicated below.
 
-## NOTE
-Before using `sky130_nist_tapeout.py` file you should set env variable `PDK_ROOT` to the root directory of the sky130 pdk on your system. You should also change the pdk path in `opamp_perf_eval.sp` and `extract.bash`.
-
 ## general help
 ```
 usage: sky130_nist_tapeout.py [-h]
-                              {extract_stats,get_training_data,gen_opamp,test,create_opamp_matrix} ...
+                              {extract_stats,get_training_data,gen_opamp,gen_opamps,test,create_opamp_matrix}
+                              ...
 
 sky130 nist tapeout sample, RL generation, and statistics utility.
 
 options:
   -h, --help            show this help message and exit
 
 mode:
-  {extract_stats,get_training_data,gen_opamp,test,create_opamp_matrix}
+  {extract_stats,get_training_data,gen_opamp,gen_opamps,test,create_opamp_matrix}
     extract_stats       Run the extract_stats function.
     get_training_data   Run the get_training_data function.
-    gen_opamp           Run the gen_opamp function. optional parameters for transistors are
-                        width,length,fingers,mults
+    gen_opamp           Run the gen_opamp function. optional parameters for transistors
+                        are width,length,fingers,mults
+    gen_opamps          generates the opamps returned in the small parameters list but
+                        only saves GDS and does not add pads. always outputs to
+                        ./outputrawopamps
     test                Test mode
     create_opamp_matrix
                         create a matrix of opamps
@@ -41,20 +66,21 @@ options:
 ## gen_opamp mode
 ```
 usage: sky130_nist_tapeout.py gen_opamp [-h]
-                                        [--diffpair_params DIFFPAIR_PARAMS DIFFPAIR_PARAMS DIFFPAIR_PARAMS]
+                                        [--half_diffpair_params HALF_DIFFPAIR_PARAMS HALF_DIFFPAIR_PARAMS HALF_DIFFPAIR_PARAMS]
                                         [--diffpair_bias DIFFPAIR_BIAS DIFFPAIR_BIAS DIFFPAIR_BIAS]
                                         [--half_common_source_params HALF_COMMON_SOURCE_PARAMS HALF_COMMON_SOURCE_PARAMS HALF_COMMON_SOURCE_PARAMS HALF_COMMON_SOURCE_PARAMS]
                                         [--half_common_source_bias HALF_COMMON_SOURCE_BIAS HALF_COMMON_SOURCE_BIAS HALF_COMMON_SOURCE_BIAS HALF_COMMON_SOURCE_BIAS]
                                         [--output_stage_params OUTPUT_STAGE_PARAMS OUTPUT_STAGE_PARAMS OUTPUT_STAGE_PARAMS]
                                         [--output_stage_bias OUTPUT_STAGE_BIAS OUTPUT_STAGE_BIAS OUTPUT_STAGE_BIAS]
                                         [--mim_cap_size MIM_CAP_SIZE MIM_CAP_SIZE]
-                                        [--mim_cap_rows MIM_CAP_ROWS] [--rmult RMULT] [--add_pads]
-                                        [--output_gds OUTPUT_GDS]
+                                        [--mim_cap_rows MIM_CAP_ROWS] [--rmult RMULT]
+                                        [--add_pads] [--output_gds OUTPUT_GDS]
+                                        [--no_lvt] [--PDK_ROOT PDK_ROOT] [--big_pad]
 
 options:
   -h, --help            show this help message and exit
-  --diffpair_params DIFFPAIR_PARAMS DIFFPAIR_PARAMS DIFFPAIR_PARAMS
-                        diffpair_params (default: 6 1 4)
+  --half_diffpair_params HALF_DIFFPAIR_PARAMS HALF_DIFFPAIR_PARAMS HALF_DIFFPAIR_PARAMS
+                        half_diffpair_params (default: 6 1 4)
   --diffpair_bias DIFFPAIR_BIAS DIFFPAIR_BIAS DIFFPAIR_BIAS
                         diffpair_bias (default: 6 2 4)
   --half_common_source_params HALF_COMMON_SOURCE_PARAMS HALF_COMMON_SOURCE_PARAMS HALF_COMMON_SOURCE_PARAMS HALF_COMMON_SOURCE_PARAMS
@@ -73,34 +99,43 @@ options:
   --add_pads            add pads (gen_opamp mode only)
   --output_gds OUTPUT_GDS
                         Filename for outputing opamp (gen_opamp mode only)
+  --no_lvt              do not place any low threshold voltage transistors.
+  --PDK_ROOT PDK_ROOT   path to the sky130 PDK library
+  --big_pad             use 120um pad
 ```
 
 ## get_training_data mode
 ```
 usage: sky130_nist_tapeout.py get_training_data [-h] [-t] [--temp TEMP] [--cload CLOAD]
-                                                [--noparasitics] [--nparray NPARRAY] [--saverawsims]
-                                                [--get_tset_len] [--output_second_stage]
+                                                [--noparasitics] [--nparray NPARRAY]
+                                                [--saverawsims] [--get_tset_len]
+                                                [--output_second_stage] [--no_lvt]
+                                                [--PDK_ROOT PDK_ROOT]
 
 options:
   -h, --help            show this help message and exit
   -t, --test-mode       Set test_mode to True (default: False)
   --temp TEMP           Simulation temperature
   --cload CLOAD         run simulation with load capacitance units=pico Farads
   --noparasitics        specify that parasitics should be removed when simulating
-  --nparray NPARRAY     overrides the test parameters and takes the ones you provide (file path to .npy file).
-                        MUST HAVE LEN > 1
-  --saverawsims         specify that the raw simulation directories should be saved (default saved
-                        under save_gds_by_index/...)
+  --nparray NPARRAY     overrides the test parameters and takes the ones you provide
+                        (file path to .npy file). MUST HAVE LEN > 1
+  --saverawsims         specify that the raw simulation directories should be saved
+                        (default saved under save_gds_by_index/...)
   --get_tset_len        print the length of the default parameter set and quit
   --output_second_stage
-                        measure relevant sim metrics at the output of the second stage rather than
-                        output of third stage
+                        measure relevant sim metrics at the output of the second stage
+                        rather than output of third stage
+  --no_lvt              do not place any low threshold voltage transistors.
+  --PDK_ROOT PDK_ROOT   path to the sky130 PDK library
 ```
 
 ## test mode
 ```
-usage: sky130_nist_tapeout.py test [-h] [--output_dir OUTPUT_DIR] [--temp TEMP] [--cload CLOAD]
-                                   [--noparasitics] [--output_second_stage]
+usage: sky130_nist_tapeout.py test [-h] [--output_dir OUTPUT_DIR] [--temp TEMP]
+                                   [--cload CLOAD] [--noparasitics]
+                                   [--output_second_stage] [--no_lvt]
+                                   [--PDK_ROOT PDK_ROOT]
 
 options:
   -h, --help            show this help message and exit
@@ -110,15 +145,18 @@ options:
   --cload CLOAD         run simulation with load capacitance units=pico Farads
   --noparasitics        specify that parasitics should be removed when simulating
   --output_second_stage
-                        measure relevant sim metrics at the output of the second stage rather than
-                        output of third stage
+                        measure relevant sim metrics at the output of the second stage
+                        rather than output of third stage
+  --no_lvt              do not place any low threshold voltage transistors.
+  --PDK_ROOT PDK_ROOT   path to the sky130 PDK library
 ```
 
 ## create_opamp_matrix mode
 ```
 usage: sky130_nist_tapeout.py create_opamp_matrix [-h] [-p PARAMS] [-r RESULTS]
                                                   [--indices INDICES [INDICES ...]]
-                                                  [--output_dir OUTPUT_DIR]
+                                                  [--output_dir OUTPUT_DIR] [--no_lvt]
+                                                  [--PDK_ROOT PDK_ROOT] [--big_pad]
 
 options:
   -h, --help            show this help message and exit
@@ -127,8 +165,11 @@ options:
   -r RESULTS, --results RESULTS
                         Optional File path for results
   --indices INDICES [INDICES ...]
-                        list of int indices to pick from the opamp param.npy and add to the matrix
-                        (default: the entire params list)
+                        list of int indices to pick from the opamp param.npy and add to
+                        the matrix (default: the entire params list)
   --output_dir OUTPUT_DIR
                         Directory for output files (default: ./opampmatrix)
+  --no_lvt              do not place any low threshold voltage transistors.
+  --PDK_ROOT PDK_ROOT   path to the sky130 PDK library
+  --big_pad             use 120um pad
 ```
diff --git a/openfasoc/generators/gdsfactory-gen/tapeout_and_RL/extract.bash.template b/openfasoc/generators/gdsfactory-gen/tapeout_and_RL/extract.bash.template
@@ -7,44 +7,14 @@ export PDK_ROOT=@@PDK_ROOT
 # first arg = gds file to read
 # second arg = name of top cell in gds file to read
 
-# generate lvs netlist using magic
 magic -rcfile ./sky130A/sky130A.magicrc -noconsole -dnull << EOF
 gds read $1
 load $2
-flatten $2_flat
-load $2_flat
-gds write $2_flat.gds
-EOF
-
-magic -rcfile ./sky130A/sky130A.magicrc -noconsole -dnull << EOF
-gds read $2_flat.gds
-load $2_flat
-flatten $2
-load $2
-gds write $2.gds
-EOF
-
-
-magic -rcfile ./sky130A/sky130A.magicrc -noconsole -dnull << EOF
-gds read $2.gds
-load $2
 extract all
-ext2spice lvs
 ext2spice merge aggressive
-ext2spice cthresh 0
-ext2spice rthresh 0
 ext2spice -o $2_pex.spice
 exit
 EOF
 
-magic -rcfile ./sky130A/sky130A.magicrc -noconsole -dnull << EOF
-gds read $2.gds
-load $2
-extract all
-ext2spice merge aggressive
-ext2spice -o $2_pex.spice
-exit
-EOF
 
-rm -f $2_flat.gds
 rm -f $2.ext
diff --git a/openfasoc/generators/gdsfactory-gen/tapeout_and_RL/opamp_perf_eval.sp b/openfasoc/generators/gdsfactory-gen/tapeout_and_RL/opamp_perf_eval.sp
@@ -63,15 +63,25 @@ let savedPhaseMargin = -1
 let savedDCGain = -1
 let savedthreedbBW = -1
 
+* dp and cs bias log step
+*let linear_step_until = 0u
+*let linear_step_default = 1.1u
+*let bias_dp_Min  = 25u
+*let bias_dp_Max  = 200u
+*let bias_dp_logStep = 1.15
+*let bias_cs_Min  = 30u
+*let bias_cs_Max  = 1m
+*let bias_cs_logStep = 1.18
+
 * dp and cs bias log step
 let linear_step_until = 0u
 let linear_step_default = 1.1u
-let bias_dp_Min  = 25u
-let bias_dp_Max  = 200u
-let bias_dp_logStep = 1.15
-let bias_cs_Min  = 30u
-let bias_cs_Max  = 1m
-let bias_cs_logStep = 1.18
+let bias_dp_Min  = 1u
+let bias_dp_Max  = 25u
+let bias_dp_logStep = 1.2
+let bias_cs_Min  = 1u
+let bias_cs_Max  = 25u
+let bias_cs_logStep = 1.2
 
 * output bias linear step
 let bias_o_Min   = 93.5u

diff --git a/...enerators/gdsfactory-gen/requirements.txt → ...ctory-gen/tapeout_and_RL/requirements.txt b/...enerators/gdsfactory-gen/requirements.txt → ...ctory-gen/tapeout_and_RL/requirements.txt