media: av7110: remove budget-patch driver

This patch removes the budget-patch stand alone driver only.
This patch does *not* remove the budget-patch support from the av7110
     (= dvb-ttpci) driver.
This patch does also *not* remove the support for the full-ts mod.

The budget-patch is an obsolete, experimental hardware modification, which
aimed to receive the whole transport stream of a transponder by bypassing
the av7110. This modification never worked reliably enough to be used in a
productive environment.
"almost no packet loss" [budget-patch.c torvalds#522] is still a packet loss.

The successor of the budget-patch is the full-ts mod, which is reliable.
The full-ts mod circuit is found on the never rev. 2.2 and 2.3 DVB-S
cards ex factory. The full-ts mod support is (only) in the av7110
(= dvb-ttpci) driver.

The budget-patch driver is a stand alone driver, which turns the card into
a budget card. It doesn't appear to be ever intended for the average user.
"Card is required to have loaded firmware to tune properly. Firmware can
be loaded by insertion and removal of standard av7110 driver prior to
loading this driver." [Kconfig]

There is support for the budget-patch in the av7110 (= dvb-ttpci) driver
too, which isn't affected by this patch.

The budget-patch is obsolete and replaced by the full-ts mod quiet a while
now. Remove the budget-patch driver left over from development.

Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>

drivers/staging/media/av7110/Kconfig

@@ -51,28 +51,6 @@ config DVB_AV7110_OSD
 
 	  All other people say N.
 
-config DVB_BUDGET_PATCH
-	tristate "AV7110 cards with Budget Patch"
-	depends on DVB_BUDGET_CORE && I2C
-	depends on DVB_AV7110
-	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
-	select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT
-	select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT
-	help
-	  Support for Budget Patch (full TS) modification on
-	  SAA7146+AV7110 based cards (DVB-S cards). This
-	  driver doesn't use onboard MPEG2 decoder. The
-	  card is driven in Budget-only mode. Card is
-	  required to have loaded firmware to tune properly.
-	  Firmware can be loaded by insertion and removal of
-	  standard AV7110 driver prior to loading this
-	  driver.
-
-	  Say Y if you own such a card and want to use it.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called budget-patch.
-
 if DVB_AV7110
 
 # Frontend driver that it is used only by AV7110 driver

drivers/staging/media/av7110/Makefile

@@ -10,8 +10,6 @@ ifdef CONFIG_DVB_AV7110_IR
 dvb-ttpci-objs += av7110_ir.o
 endif
 
-obj-$(CONFIG_DVB_BUDGET_PATCH) += budget-patch.o
-
 obj-$(CONFIG_DVB_AV7110) += dvb-ttpci.o
 
 obj-$(CONFIG_DVB_SP8870) += sp8870.o