A Classic Amiga Enclosure for the Vampire V4 Standalone PCB
3d-model was created in DesignSpark Mechanical 4.0
All dimensions were reverse engineered using a digital caliper measuring a real Vampire V4 PCB rev 3C.
Sticker size is 49x13 mm (groove is 50x13,5 mm).
Compatible A1200 front LEDs are Type 1, 15mm (Rev. B and Rev. C) of classic Amiga 1200 cases.
Why no STEP-file? Sorry I do not have the Exchange add-on module to export geometry to STEP and IGES formats. The free version of Designspark Mechanical 4.0 doesn't support it.
Thomas Köckerbauer has made an excellent small PCB with a header for connecting an A1200 LED PCB to the V4SA
https://github.com/tkoecker/Amiga_1200_LED_Header_for_Vampire_4_SA
Many thanks Thomas!
Bottom part:
I printed this part using PLA 60% infill, 220/80°C (Nozzle/Bed temp) and with a Brim slicing in Cura...Print took about 8h to finish for Mr Ender.
Top part:
I printed this part using PLA 60% infill, 220/80°C (Nozzle/Bed temp) and with a Brim and Support Structure enabled when slicing in Cura...I first tried printing it upside down on several trials but didn't manage to get the Vampire-text to come out good. I then switched tactic to print it the "correct" way enabling/generating support structure when slicing in Cura. Print took about 15h!!!, and it was a lot of trimming to do afterwards to remove the "guts".
That's all folks!
Oh, you want a V4-sticker or two? Drop me an email and I'll send you one for cost ;) jorgen.bilander at gmail.com