-
Notifications
You must be signed in to change notification settings - Fork 151
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Request to decode Q2 command #520
Comments
Do you know what the response decodes to?
…On Sat, Nov 9, 2024, 14:20 Abu Bakar ***@***.***> wrote:
While the result for Q1 command is decoded properly, Q2 command output is
not decoded. I know these are not documented but since Q1 has been done, so
should Q2.
Here is the output of Q2 on my inverter:
C:\Users\GhulamNabi>mpp-solar -p "COM26" -c Q2 --porttype vserial -b 2400
Command: Q2 - No description found Parameter Value Unit
warning No definition for command Q2 in protocol b'PI30'
response (00 00 01 0072 0064 0069 0076 232.5 00.33 00.3 00 00 00 00 01
1000 04432 00 004432 12.2 00 000 0000 0000 0069 0072 0018 0073 0000n×
—
Reply to this email directly, view it on GitHub
<#520>, or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAJVKNVOHACVU5L7MY2XBXLZ7VPM3AVCNFSM6AAAAABROSIQDWVHI2DSMVQWIX3LMV43ASLTON2WKOZSGY2DKNBUHA3DAOA>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
I haven't found any documentation but seems like there is no new information that is not being shown by other query commands. |
if you can determine what each field is, i can add a decode - it helps for
completeness
…On Mon, 11 Nov 2024 at 15:05, Abu Bakar ***@***.***> wrote:
I haven't found any documentation but seems like there is no new
information that is not being shown by other query commands.
—
Reply to this email directly, view it on GitHub
<#520 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAJVKNUBR477PGQUF52CXV32AAGGVAVCNFSM6AAAAABROSIQDWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINRXGA4TAOBUGE>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
While the result for Q1 command is decoded properly, Q2 command output is not decoded. I know these are not documented but since Q1 has been done, so should Q2.
Here is the output of Q2 on my inverter:
C:\Users\GhulamNabi>mpp-solar -p "COM26" -c Q2 --porttype vserial -b 2400
Command: Q2 - No description found
Parameter Value Unit
warning No definition for command Q2 in protocol b'PI30'
response (00 00 01 0072 0064 0069 0076 232.5 00.33 00.3 00 00 00 00 01 1000 04432 00 004432 12.2 00 000 0000 0000 0069 0072 0018 0073 0000n×
The text was updated successfully, but these errors were encountered: