Updates. (#328)

README.md

@@ -7,20 +7,20 @@ A plugin for controlling [Husqvarna Automower](https://www.husqvarna.com/us/robo
 
 Be advised, because this plug-in uses cloud services, service disruptions or outages are possible as it relies solely on the aforementioned cloud services to manage the communication with your mowers(s).
 
-#### Installation
+## Installation
 For help installing and configuring the plugin, please see the documentation found at:
 https://jeff-winn.github.io/homebridge-automower-platform
 
-#### Hardware Requirements
+## Hardware Requirements
 The following hardware requirements are necessary for the proper operation of the plug-in. If you are unsure whether your mower is supported by the plug-in, you can find the compatibility matrix [HERE](https://jeff-winn.github.io/homebridge-automower-platform/extras/compatibility-matrix).
 
 - The Automower *must* have an Automower Connect module installed, Bluetooth only models will require an upgrade. For more information, please contact your local Husqvarna Automower dealer.
 - The Sileno *must* be a Smart series mower which you can control remotely via an app while not near the device, Bluetooth only models are not supported.
 
-#### Known Issues
+## Known Issues
 - Starting with iOS 16, Apple has changed their naming scheme within HomeKit such that all services for an accessory use the accessory name. If all the switches and sensors are named after your mower, and you are using 1.4.0 or later of the plug-in, removing the mower using the instructions found [HERE](https://jeff-winn.github.io/homebridge-automower-platform/extras/removing-mower) should correct the issue.
 
-#### Supported Capabilities
+## Supported Capabilities
 Be advised, the capabilities mentioned below vary between product lines by Husqvarna. Depending on the type of mower you have purchased, different capabilities will be provided by the plug-in.
 
 - A switch to control whether each mower (based on configuration - see documentation):
@@ -42,10 +42,10 @@ Be advised, the capabilities mentioned below vary between product lines by Husqv
 
 ** These features are not directly supported within the Apple HomeKit app and will require a 3rd party application (such as Controller for HomeKit) to use for any automations.
 
-#### Additional Capabilities:
+## Additional Capabilities:
 - Streams events from Husqvarna rather than polling for changes. This allows you to run automations without having to worry about the timing of when a change is noticed, it should be within a few seconds.
 - Does not cause logout of Husqvarna mobile application.
 - Multiple languages may be supported in logs (need help with translations).
 
-#### Disclaimer
+## Disclaimer
 This plug-in is in no way affiliated with Husqvarna, the Husqvarna Group, or any of its subsidiaries or partners. Any trademarks used here-in are property of Husqvarna and/or the Husqvarna Group.