Skip to content

A through-hole soldering kit that leaves you with a fully functional, serial enabled, arduino programmable 16x2 LCD

Notifications You must be signed in to change notification settings

jimblom/Serial-LCD-Kit

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

4 Commits
 
 
 
 
 
 

Repository files navigation

  Serial Enabled LCD Kit
  by: Jim Lindblom - SparkFun Electronics
  Characters received in a serial stream are displayed on a 16x2,
  20x4, etc. LCD. Special commands are also available to clear, scroll
  display cursors and other functions.
  
  License: Beerware - As long as you retain this notice you
  can do whatever you want with this stuff. If we meet some day, 
  and you think this stuff is worth it, you can buy 
  me a beer in return.
  
  Revisions:
  9/29/10 - Added support for 20x4, 16x4 and 20x2 LCDs.
  See special commands 0x03 through 0x06. LCD size is stored
  in EEPROM and retained upon loss of power.
  
  The circuit:
  * LCD RS pin to digital pin 2
  * LCD R/W pin to digital pin 3
  * LCD Enable pin to digital pin 4
  * LCD D4 pin to digital pin 5
  * LCD D5 pin to digital pin 6
  * LCD D6 pin to digital pin 7
  * LCD D7 pin to digital pin 8
  * 10K resistor:
  * ends to +5V and ground
  * wiper to LCD VO pin (pin 3)
 
  Uses the LiquidCrystal Arduino library to control the LCD
  ---------------------------------------------------------
  http://www.arduino.cc/en/Tutorial/LiquidCrystal
  Much thanks to: Limor Fried, Tom Igoe, David A. Mellis
  for their fantastic work on this library!

About

A through-hole soldering kit that leaves you with a fully functional, serial enabled, arduino programmable 16x2 LCD

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages