-
Notifications
You must be signed in to change notification settings - Fork 6
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[TESTING] 2.0.0-rc (Release Candidate) #139
Comments
Closed with 038e49f 😄 I've had it tested with my complete setup (myStrom Lights, dingz Blinds, Buttons et al.) for over a day (+ some changes) and I'm quite confident it's much less buggy than |
Hello @johannrichard |
I've just released a |
👍🏻😂 Great! Was just a point, which I still want to test😅 |
I have one more improvement: can't we give the LEDs a proper label? For example, the LED+ device name, which we will read out. |
There's definitely room for many small improvements. Now that some of the bigger glitches are fixed, that should become easier, too. |
I have just discovered an issue in my setup. I have the DIP=1 setup. I have configured the motor but not the dimmers. |
How does the ALIVE check for the MyStrom buttons work? It's my understanding the buttons reside in shutdown mode and only when the button gets pressed the OS boots. Is that wrong? I can't ping the buttons nor access the API, so to me it looks like they're down (like they're supposed), thus wondering about the ALIVE entries in the log. |
They're undead. Good observation though. |
I've just released a "release candidate" of the plugin. You can install it in your homebridge by running
npm i homebridge-dingz@next
from the Terminal in Homebridge Config UI X or your command line and then restart homebridge.One note: it will BREAK YOUR BLINDS -- I had to implement a change that is unfortunately incompatible with old setups. It should be much more reliable now but I can't tell for sure. If you have a test-server you can run along your main server to do the testing, that will help (you can also run a local homebridge instance on your computer for some testing and to avoid touching your main setup -- you will just have to set-up a new Home in HomeKit and add the bridge there).
Please have a look at it. It should fix quite a few problems and will make it easier to solve additional little ones. I'd be grateful to see some testing before I release this as a major version.
Release notes can be found here: v2.0.0-rc
Fixes and implements changes and bugs reported in #3, #103, #116, #120, #123, #124, #129, #135
(@qx54, @granturism0, @simonnelli: I'd be very grateful if you could help with testing in your different environments.)
The text was updated successfully, but these errors were encountered: