Update Firmware

Update Firmware

Flipper Zero WiFi Dev Board, ESP32 Wemos D1 Mini Adapter

You can use any of the following options to update your Flipper Zero WiFi Dev Board Marauder firmware:

• SD Card/CLI Update (recommended)
• FZ Marauder Flasher
• FZEasyMarauderFlash
• Spacehuhn Web Updater

ESP32 Marauder v4, v6, Kit, Mini, WiFi Dev Board Pro:

You can use any of the following options to update your official ESP32 Marauder hardware:

• SD Card/CLI Update (recommended)
• Update Firmware Menu
• Spacehuhn Web Updater

Using Spacehuhn Web Updater

You can use the web updater made by Spacehuhn to install/update the Marauder firmware on your device. To do so, you will need to provide the Marauder firmware file, partition file, and bootloader file to the installer. Please use the instructions and table below to update your device.

1. Go to the Web Updater
2. With your device plugged in, click connect
3. Use the following table to select the appropriate files and place them at the corresponding address
   • Enter the address shown as the blue text in the appropriate space and add the file linked to that blue text

	ESP32 Marauder v4, v6, Kit, Mini	Flipper Zero WiFi Dev Board	Flipper Zero Multi Board S3	WiFi Dev Board Pro/LDDB/NodeMCU-32S/ESP32 Wemos D1 Mini/BFFB
Bootloader	0x1000	0x1000	0x0	0x1000
Partitions	0x8000	0x8000	0x8000	0x8000
Boot App	0xE000	0xE000	0xE000	0xE000
Firmware	0x10000	0x10000	0x10000	0x10000

• Use the following table to select the proper Marauder binary for your hardware. Please refer to version marking on your Marauder hardware is present.

Hardware	Binary Version
v4 (OG)	_old_hardware.bin
v6	_new_hardware.bin/_v6.bin
v6.1	_v6_1.bin
Kit	_kit.bin
Mini	_mini.bin
Flipper Zero	_flipper.bin
MutliBoard S3	_multiboardS3.bin
LDDB/NodeMCU/Wemos	_lddb.bin
Dev Board Pro	_marauder_dev_board_pro.bin
BFFB	_marauder_dev_board_pro.bin

4. Click program and wait. Once it says "To run the new firmware please reset your device", either hit the reset button or just flick the power switch off and back on