Corrected port for inhibit and state in IDLE #20
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # Written with https://mirzafahad.github.io/2021-03-09-github-cicd-for-arduino-projects/ | |
| # This is the name of the workflow, visible on GitHub UI. | |
| name: Build Firmware | |
| # Controls when the action will run. | |
| on: | |
| # Triggers the workflow on push or pull request only for the main branch | |
| push: | |
| paths: | |
| - 'firmware/**' | |
| - '.github/**' | |
| branches: [ main ] | |
| pull_request: | |
| paths: | |
| - 'firmware/**' | |
| - '.github/**' | |
| branches: [ main ] | |
| # This is the list of jobs that will be run concurrently. | |
| # Since we use a build matrix, the actual number of jobs | |
| # started depends on how many configurations the matrix | |
| # will produce. | |
| jobs: | |
| # This is the name of the job - can be whatever. | |
| build: | |
| # Here we tell GitHub that the jobs must be determined | |
| # dynamically depending on a matrix configuration. | |
| strategy: | |
| matrix: | |
| # The matrix will produce one job for each configuration | |
| # parameter of type `arduino-platform`, in this case, it | |
| # is only 1. | |
| arduino-platform: ["arduino:avr"] | |
| # This is usually optional but we need to statically define the | |
| # FQBN of the boards we want to test for each platform. In the | |
| # future the CLI might automatically detect and download the | |
| # core needed to compile against a certain FQBN, at that point | |
| # the following `include` section will be useless. | |
| include: | |
| # This works like this: when the platformn is "arduino:avr", | |
| # the variable `fqbn` is set to "arduino:avr:uno". | |
| - arduino-platform: "arduino:avr" | |
| fqbn: "arduino:avr:uno" | |
| name: "arduino-avr-uno" | |
| runs-on: ubuntu-latest | |
| # full list of steps for "Build Firmware" job | |
| steps: | |
| # First clone the repo using the `checkout` action. | |
| - name: Checkout | |
| uses: actions/checkout@main | |
| # use the `arduino/setup-arduino-cli` action to install/configure the Arduino CLI | |
| - name: Setup Arduino CLI | |
| uses: arduino/setup-arduino-cli@v1.1.2 | |
| # We then install the platform, which one will be determined | |
| # dynamically by the build matrix. | |
| - name: Install platform | |
| run: | | |
| arduino-cli core update-index | |
| arduino-cli core install ${{ matrix.arduino-platform }} | |
| - name: Install libraries | |
| run: | | |
| arduino-cli lib install MsgPack@0.4.2 | |
| # Compile using the FQBN that was set in the build matrix. | |
| - name: Compile Firmware | |
| run: | | |
| mkdir ./firmware/release/ | |
| arduino-cli compile --fqbn ${{ matrix.fqbn }} ./firmware/firmware.ino --warnings more --output-dir ./firmware/release/ | |
| - uses: actions/upload-artifact@v4 | |
| with: | |
| name: "compiled-firmware-${{ matrix.name }}" | |
| path: ./firmware/release |