Team Members

1. Shern Shiou Tan (shernshiou@gmail.com)
2. Foo Chien Haw (isaac.haw@gmail.com)
3. Vivan Raaj (mrsomebody456@gmail.com)
4. Ivan Lim (ivanlimsiukee@hotmail.com)
5. Kegan Gan (kegan@kegan.info) [TEAM LEAD]

Installation

This is the project repo for the final project of the Udacity Self-Driving Car Nanodegree: Programming a Real Self-Driving Car. For more information about the project, see the project introduction here.

Installation

• Be sure that your workstation is running Ubuntu 16.04 Xenial Xerus or Ubuntu 14.04 Trusty Tahir. Ubuntu downloads can be found here.

• If using a Virtual Machine to install Ubuntu, use the following configuration as minimum:

  • 2 CPU
  • 2 GB system memory
  • 25 GB of free hard drive space

  The Udacity provided virtual machine has ROS and Dataspeed DBW already installed, so you can skip the next two steps if you are using this.

• Follow these instructions to install ROS

  • ROS Kinetic if you have Ubuntu 16.04.
  • ROS Indigo if you have Ubuntu 14.04.

• Dataspeed DBW

  • Use this option to install the SDK on a workstation that already has ROS installed: One Line SDK Install (binary)

• Download the Udacity Simulator.

Usage

1. Clone the project repository

git clone https://github.com/udacity/CarND-Capstone.git

2. Install python dependencies

cd CarND-Capstone
pip install -r requirements.txt

3. Make and run styx

cd ros
catkin_make
source devel/setup.sh
roslaunch launch/styx.launch

4. Run the simulator

Real world testing

1. Download training bag that was recorded on the Udacity self-driving car
2. Unzip the file

unzip traffic_light_bag_files.zip

3. Play the bag file

rosbag play -l traffic_light_bag_files/loop_with_traffic_light.bag

4. Launch your project in site mode

cd CarND-Capstone/ros
roslaunch launch/site.launch