This is a simple Ethernet interface-card for Agilent/Keysight DSO-X 2000 and 3000 series oscilloscopes. The original Agilent/Keysight DSOXLAN module (about 326 euros + VAT as of December 2014) also includes VGA output, while this simple card provides only LAN.
Many thanks to "georges80" on the EEVBlog forum for the original schematic and PCB layout.
Components:
- Ethernet jack, WÜRTH 7499010121A
- 2pcs 220R 0805 resistor
- 1pcs 10R 0805 resistor
- 1pcs 100n 0805 capacitor
Files:
- Kicad: schematic, PCB, project, cmp, netlist
- non-standard footprints in /footprints: Ethernet magjack, 2x40-pin card-edge connector.
3D print components for case obtained from
Apparently they have been authored by Jay_Diddy_B.
Released under the CERN OHL. See http://ohwr.org/cernohl
Using the 3D printed front cover and spacers, the entire module looks like:
The oscilloscope features a built-in HTTP server. The LAN settings page from the oscilloscope:
There are also options for remote control straight from the HTTP server. Some of them require Java, but when selecting the "Tablet" mode, it offers an HTML5 control option:
(Note: the above module has been built using a slightly different version of the Würth RJ45 jack, 7499011121A. If anyone wants to use exactly these, see https://github.com/dl8dtl/DSOXLAN/tree/WE7499011121A )