oO

.i3status.conf

@@ -0,0 +1,72 @@
+# i3status configuration file.
+# see "man i3status" for documentation.
+
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# ß
+# If the above line is not correctly displayed, fix your editor first!
+
+general {
+        colors = true
+        interval = 5
+}
+
+order += "ipv6"
+order += "disk /"
+order += "run_watch DHCP"
+order += "run_watch VPN"
+#order += "wireless _first_"
+order += "ethernet _first_"
+#order += "battery 0"
+order += "load"
+order += "volume master"
+order += "tztime local"
+
+volume master {
+	device = "default"
+	mixer = "Master"
+	mixer_idx = 0
+	#termsyn font
+	format = "A %volume "
+}
+
+wireless _first_ {
+        format_up = "W: (%quality at %essid) %ip"
+        format_down = "W: down"
+}
+
+ethernet _first_ {
+        # if you use %speed, i3status requires root privileges
+        format_up = "E: %ip (%speed)"
+        format_down = "E: down"
+}
+
+battery 0 {
+        format = "%status %percentage %remaining"
+        last_full_capacity = true
+        integer_battery_capacity = false
+        threshold_type  = "percentage"
+        low_threshold = 15
+        #threshold_type  = "time"
+        #low_threshold = 45
+}
+
+run_watch DHCP {
+        pidfile = "/var/run/dhclient*.pid"
+}
+
+run_watch VPN {
+        pidfile = "/var/run/vpnc/pid"
+}
+
+tztime local {
+        format = "%Y-%m-%d %H:%M:%S"
+}
+
+load {
+        format = "%1min"
+}
+
+disk "/" {
+        format = "%avail"
+}

.zshrc

@@ -33,6 +33,8 @@ alias d='dirs -v'
 alias v='vim '
 alias pacman='sudo pacman '
 alias x='xclip'
+alias p='python3'
+alias p2='python2'
 
 alias t='tmux'
 alias tl='tmux ls'

check.sh

@@ -7,3 +7,7 @@ echo "comparing .bashrc"
 colordiff -u ~/.bashrc .bashrc
 echo "comparing .tmux.conf"
 colordiff -u ~/.tmux.conf .tmux.conf
+echo "comparing .i3status.conf"
+colordiff -u ~/.i3status.conf .i3status.conf
+echo "comparing ~/.config/i3/config"
+colordiff -u ~/.config/i3/config config

config

@@ -0,0 +1,214 @@
+# This file has been auto-generated by i3-config-wizard(1).
+# It will not be overwritten, so edit it as you like.
+#
+# Should you change your keyboard layout some time, delete
+# this file and re-run i3-config-wizard(1).
+#
+
+# i3 config file (v4)
+#
+# Please see http://i3wm.org/docs/userguide.html for a complete reference!
+
+set $mod Mod4
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+font pango:monospace 9
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+#font pango:DejaVu Sans Mono 8
+
+# Before i3 v4.8, we used to recommend this one as the default:
+# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+# The font above is very space-efficient, that is, it looks good, sharp and
+# clear in small sizes. However, its unicode glyph coverage is limited, the old
+# X core fonts rendering does not support right-to-left and this being a bitmap
+# font, it doesn’t scale on retina/hidpi displays.
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# start a terminal with tmux
+#bindsym $mod+Return exec i3-sensible-terminal -e tmux
+bindsym $mod+Return exec i3-sensible-terminal 
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym $mod+d exec dmenu_run
+# There also is the (new) i3-dmenu-desktop which only displays applications
+# shipping a .desktop file. It is a wrapper around dmenu, so you need that
+# installed.
+# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindsym $mod+h focus left
+bindsym $mod+j focus down
+bindsym $mod+k focus up
+bindsym $mod+l focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+j move left
+bindsym $mod+Shift+k move down
+bindsym $mod+Shift+l move up
+bindsym $mod+Shift+odiaeresis move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+#bindsym $mod+h split h
+bindsym $mod+g split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# switch to workspace
+bindsym $mod+1 workspace 1
+bindsym $mod+2 workspace 2
+bindsym $mod+3 workspace 3
+bindsym $mod+4 workspace 4
+bindsym $mod+5 workspace 5
+bindsym $mod+6 workspace 6
+bindsym $mod+7 workspace 7
+bindsym $mod+8 workspace 8
+bindsym $mod+9 workspace 9
+bindsym $mod+0 workspace 10
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace 1
+bindsym $mod+Shift+2 move container to workspace 2
+bindsym $mod+Shift+3 move container to workspace 3
+bindsym $mod+Shift+4 move container to workspace 4
+bindsym $mod+Shift+5 move container to workspace 5
+bindsym $mod+Shift+6 move container to workspace 6
+bindsym $mod+Shift+7 move container to workspace 7
+bindsym $mod+Shift+8 move container to workspace 8
+bindsym $mod+Shift+9 move container to workspace 9
+bindsym $mod+Shift+0 move container to workspace 10
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        # These bindings trigger as soon as you enter the resize mode
+
+        # Pressing left will shrink the window’s width.
+        # Pressing right will grow the window’s width.
+        # Pressing up will shrink the window’s height.
+        # Pressing down will grow the window’s height.
+        bindsym j resize shrink width 10 px or 10 ppt
+        bindsym k resize grow height 10 px or 10 ppt
+        bindsym l resize shrink height 10 px or 10 ppt
+        bindsym odiaeresis resize grow width 10 px or 10 ppt
+
+        # same bindings, but for the arrow keys
+        bindsym Left resize shrink width 10 px or 10 ppt
+        bindsym Down resize grow height 10 px or 10 ppt
+        bindsym Up resize shrink height 10 px or 10 ppt
+        bindsym Right resize grow width 10 px or 10 ppt
+
+        # back to normal: Enter or Escape
+        bindsym Return mode "default"
+        bindsym Escape mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+
+        colors {
+        background #000000
+        statusline #00A5FF #that neon blue
+        separator #666666
+
+        focused_workspace  #4c7899 #285577 #ffffff
+        active_workspace   #333333 #5f676a #ffffff
+        inactive_workspace #333333 #222222 #888888
+        urgent_workspace   #2f343a #900000 #ffffff
+    } 
+        status_command i3status
+}
+
+#set $Locker i3lock && sleep 1
+set $Locker /usr/local/bin/lock && sleep 1
+
+bindsym $mod+Shift+u exec $Locker
+
+
+#set $mode_system System (l) lock, (e) logout, (s) shutdown, (h) hibernate, (r) reboot
+set $mode_system System (e) logout, (s) shutdown, (h) hibernate, (r) reboot
+mode "$mode_system" {
+    #bindsym l exec --no-startup-id $Locker, mode "default"
+    bindsym e exec --no-startup-id i3-msg exit, mode "default"
+    bindsym h exec --no-startup-id $Locker && systemctl suspend, mode "default"
+    bindsym r exec --no-startup-id systemctl reboot, mode "default"
+    bindsym s exec --no-startup-id systemctl poweroff -i, mode "default"  
+
+    # back to normal: Enter or Escape
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+}
+
+bindsym $mod+Pause mode "$mode_system"
+
+#start chromium
+bindsym $mod+i exec chromium
+
+#start terminal with tmux
+bindsym $mod+t exec thunar
+
+#audio
+#bindsym XF86AudioRaiseVolume exec amixer -q set Master 2dB+ unmute
+#bindsym XF86AudioLowerVolume exec amixer -q set Master 2dB- unmute
+
+bindsym XF86AudioRaiseVolume exec amixer set Master 5%+ > /dev/null
+bindsym XF86AudioLowerVolume exec amixer set Master 5%- > /dev/null
+bindsym XF86AudioMute exec amixer -q set Master toggle
+
+#autostart owncloud and thunderbird
+exec owncloud
+exec thunderbird
+exec gajim
+
+#move window to next output
+bindsym $mod+n move container to output left
+

install.sh

@@ -3,3 +3,5 @@ cp .zshrc ~/.zshrc
 cp .bashrc ~/.bashrc
 cp .tmux.conf ~/.tmux.conf
 cp .vimrc ~/.vimrc
+cp config ~/.config/i3/config
+cp .i3status.conf ~/.i3status.conf