pronounced as gimmick.
Manage Google Cloud Platform (GCP) infrastructure using migrations that describe incremental changes such as additions or deletions of resources. This work is inspired by MyBatis migrations for SQL database setup.
Your gmig infrastructure is basically a folder with incremental change files, each with a timestamp prefix (for sort ordering) and readable name.
/010_create_some_account.yaml
/015_add_permissions_to_some_account.yaml
/my-gcp-production-project
gmig.yaml
Each change is a single YAML file with one or more shell commands that change infrastructure for a project.
# add loadrunner service account
do:
- gcloud iam service-accounts create loadrunner --display-name "LoadRunner"
undo:
- gcloud iam service-accounts delete loadrunner
A change must have at least a do section and optionally an undo section.
The do section typically has a list of gcloud commands that create resources but any available tool can be used.
All lines will be executed at once using a single temporary shell script so you can use shell variables to simplify each section.
The undo section typically has an ordered list of gcloud commands that deletes the same resources (in reverse order if relevant).
Each command in each section can use the following environment variables: $PROJECT,$REGION,$ZONE,$GMIG_CONFIG_DIR, and any additional environment variables populated from the target configuration (see env section in the configuration below).
Information about the last applied migration to a project is stored as a Google Storage Bucket object.
Therefore, usage of this tool requires you to have create a Bucket and set the permissions (Storage Writer) accordingly.
To view the current state of your infrastructure related to each migration, you can add the view section to the YAML file, such as:
# add loadrunner service account
do:
- gcloud iam service-accounts create loadrunner --display-name "LoadRunner"
undo:
- gcloud iam service-accounts delete loadrunner
view:
- gcloud iam service-accounts describe loadrunner
and use the view subcommand.
Commands (do,undo,view) can be made conditional by adding an if section.
You can only use custom environment variables and configuration parameters (PROJECT,ZONE,REGION) in expressions.
If the expression evaluates to true then the do (up), undo (down) and view (view) commands are executed.
if: PROJECT == "your-project-id"
do:
- gcloud condig list
or with combinations:
if: (PROJECT == "your-project-id") && (ZONE == "my-zone")
do:
- gcloud condig list
For available operators, see Language-Definition
NAME:
gmig - Google Cloud Platform infrastructure migration tool
USAGE:
gmig [global options] command [command options] [arguments...]
COMMANDS:
init Create the initial configuration, if absent.
new Create a new migration file from a template using a generated timestamp and a given title.
up Runs the do section of all pending migrations in order, one after the other.
If a migration file is specified then stop after applying that one.
down Runs the undo section of the last applied migration only.
down-all Runs the undo section of all applied migrations.
plan Log commands of the do section of all pending migrations in order, one after the other.
status List all migrations with details compared to the current state.
view Runs the view section of all applied migrations to see the current state reported by your infrastructure.
force state | do | undo
util create-named-port | delete-named-port
export project-iam-policy | storage-iam-policy
help, h Shows a list of commands or help for one command
GLOBAL OPTIONS:
-q quiet mode, accept any prompt
-v verbose logging
--help, -h show help
--print-version, -V print only the version
You need to compile it using the Go SDK.
go install github.com/emicklei/gmig@latest
Prepares your setup for working with migrations by creating a gmig.json file in a target folder.
gmig init my-gcp-production-project
Then your filesystem will have:
/my-gcp-production-project/
gmig.yaml
You must change the file gmig.yaml to set the Project and Bucket name.
# gmig configuration file
#
# Google Cloud Platform migrations tool for infrastructure-as-code. See https://github.com/emicklei/gmig.
# [project] must be the Google Cloud Project ID where the infrastructure is created.
# Its value is available as $PROJECT in your migrations.
#
# Required by gmig.
project: my-project
# [region] must be a valid GCP region. See https://cloud.google.com/compute/docs/regions-zones/
# A region is a specific geographical location where you can run your resources.
# Its value is available as $REGION in your migrations.
#
# Not required by gmig but some gcloud and gsutil commands do require it.
# region: europe-west1
# [zone] must be a valid GCP zone. See https://cloud.google.com/compute/docs/regions-zones/
# Each region has one or more zones; most regions have three or more zones.
# Its value is available as $ZONE in your migrations.
#
# Not required by gmig but some gcloud and gsutil commands do require it.
# zone: europe-west1-b
# [bucket] must be a valid GCP Storage bucket.
# A Google Storage Bucket is used to store information (object) about the last applied migration.
# Bucket can contain multiple objects from multiple applications. Make sure the [state] is different for each app.
#
# Required by gmig.
bucket: my-bucket
# [state] is the name of the object that hold information about the last applied migration.
# Required by gmig.
state: myapp-gmig-last-migration
# [env] are additional environment values that are available to each section of a migration file.
# This can be used to create migrations that are independent of the target project.
# By convention, use capitalized words for keys.
# In the example, "myapp-cluster" is available as $K8S_CLUSTER in your migrations.
#
# Not required by gmig.
env:
K8S_CLUSTER: myapp-cluster
If you decide to store state files of different projects in one Bucket then set the state object name to reflect this, eg. myproject-gmig-state.
If you want to apply the same migrations to different regions/zones then choose a target folder name to reflect this, eg. my-gcp-production-project-us-east. Values for region and zone are required if you want to create Compute Engine resources. The env map can be used to parameterize commands in your migrations. In the example, all commands will have access to the value of $K8S_CLUSTER.
Creates a new migration for you to describe a change to the current state of infrastructure.
gmig new "add storage view role to cloudbuild account"
Using a combination of the options --do, --undo and --view, you can set the commands directly for the new migration.
List all migrations with an indicator (applied,pending) whether is has been applied or not.
gmig status my-gcp-production-project/
Run this command in the directory where all migrations are stored. Use --migrations for a different location.
Log commands of the do section of all pending migrations in order, one after the other.
If stop is given, then stop after that migration file.
Executes the do section of each pending migration compared to the last applied change to the infrastructure.
If stop is given, then stop after that migration file.
Upon each completed migration, the gmig-last-migration object is updated in the bucket.
gmig up my-gcp-production-project
Executes one undo section of the last applied change to the infrastructure.
If completed then update the gmig-last-migration object.
gmig down my-gcp-production-project
Executes undo section of all applied change to the infrastructure.
Updates the gmig-last-migration object after each successfull step.
gmig down-all my-gcp-production-project
Executes the view section of each applied migration to the infrastructure.
If migration file is given then run that view only.
gmig view my-gcp-production-project
Processes the source-file as a Go template and write the result to stdout.
If the -w is given then rewrite the source with the processed content.
The following functions are available:
This function takes the first argument and does a lookup in the available OS environment values. Example of a configuration snippet that needs the environment dependent value for $PROJECT.
project: {{ env "PROJECT" }}
Example:
gmig template some-config.template.yaml > some-config.yaml
Exporting migrations from existing infrastructure is useful when you start working with gmig but do not want to start from scratch.
Several sub commands are (or will become) available to inspect a project and export migrations to reflect the current state.
After marking the current state in gmig (using force-state), new migrations can be added that will bring your infrastructure to the next state.
The generated migration can ofcourse also be used to just copy commands to your own migration.
Generate a new migration by reading all the IAM policy bindings from the current infrastructure of the project.
gmig -v export project-iam-policy my-project/
Generate a new migration by reading all the IAM policy bindings, per Google Storage Bucket owned by the project.
gmig -v export storage-iam-policy my-project/
Sometimes you need to fix things because you made a mistake or want to reorganise your work. Use the force and confirm your action.
Explicitly set the state for the target to the last applied filename. This command can be useful if you need to work from existing infrastructure. Effectively, this filename is written to the bucket object. Use this command with care!.
gmig force state my-gcp-production-project 010_create_some_account.yaml
Explicitly run the commands in the do section of a given migration filename.
The gmig-last-migration object is not updated in the bucket.
Use this command with care!.
gmig force do my-gcp-production-project 010_create_some_account.yaml
Explicitly run the commands in the undo section of a given migration filename.
The gmig-last-migration object is not updated in the bucket.
Use this command with care!.
gmig force undo my-gcp-production-project 010_create_some_account.yaml
Export all available environment variable from the configuration file and also export $PROJECT, $REGION and $ZONE Use this command with care!.
eval $(gmig export-env my-gcp-production-project)
The Cloud SDK has a command to set-named-ports but not a command to add or delete a single name:port mapping. To simplify the migration command for creating a name:port mapping, this gmig util command is added.
First it calls get-named-ports to retrieve all existing mappings. Then it will call set-named-ports with the new mapping unless it already exists.
The Cloud SDK has a command to set-named-ports but not a command to add or delete a single name:port mapping. To simplify the migration command for deleting a name:port mapping, this gmig util command is added.
First it calls get-named-ports to retrieve all existing mappings. Then it will call set-named-ports without the mapping.
util add-path-rules-to-path-matcher [config folder] -url-map [url-map-name] -service [backend-service-name] -path-matcher [path-matcher-name] -paths "/v1/path/, /v1/otherpath/"
The Cloud SDK has a command to add a patch matcher with a set of paths but not a command update the path rules of an existing path matcher in the url map. To write a migration that changes the set of paths (add,remove), this gmig util command is added.
First is exports an URL map, updates the paths of the rules of a path-matcher, then imports the changed URL map. Because this migration is changing a regional resource which is typically shared by multiple services, the patching of the URL map is executed using a global lock (using the Bucket from the config).
This repository has a number of examples of migrations.
© 2022, ernestmicklei.com. MIT License. Contributions welcome.