Skip to content

Commit

Permalink
Minor doc fix for syntax and typo (#16666)
Browse files Browse the repository at this point in the history
* Minor doc fix for syntax and typo

Signed-off-by: Duffie Cooley <cooleyd@vmware.com>

* Feedback from sftim
  • Loading branch information
Duffie Cooley authored and k8s-ci-robot committed Oct 9, 2019
1 parent 6a4c73b commit 331cc6f
Showing 1 changed file with 41 additions and 41 deletions.
Original file line number Diff line number Diff line change
Expand Up @@ -114,21 +114,21 @@ option. Your cluster requirements may need a different configuration.
- The `--upload-certs` flag is used to upload the certificates that should be shared
across all the control-plane instances to the cluster. If instead, you prefer to copy certs across
control-plane nodes manually or using automation tools, please remove this flag and refer to [Manual
certificate distribution](#manual-certs) section bellow.
certificate distribution](#manual-certs) section below.

{{< note >}}
The `kubeadm init` flags `--config` and `--certificate-key` cannot be mixed, therefore if you want
to use the [kubeadm configuration](https://godoc.org/k8s.io/kubernetes/cmd/kubeadm/app/apis/kubeadm/v1beta2) you must add the `certificateKey` field in the appropriate config locations (under `InitConfiguration` and `JoinConfiguration: controlPlane`).
{{< /note >}}
{{< note >}}
The `kubeadm init` flags `--config` and `--certificate-key` cannot be mixed, therefore if you want
to use the [kubeadm configuration](https://godoc.org/k8s.io/kubernetes/cmd/kubeadm/app/apis/kubeadm/v1beta2) you must add the `certificateKey` field in the appropriate config locations (under `InitConfiguration` and `JoinConfiguration: controlPlane`).
{{< /note >}}

{{< note >}}
Some CNI network plugins like Calico require a CIDR such as `192.168.0.0/16` and
some like Weave do not. See the [CNI network documentation](/docs/setup/production-environment/tools/kubeadm/create-cluster-kubeadm/#pod-network).
To add a pod CIDR pass the flag `--pod-network-cidr`, or if you are using a kubeadm configuration file
set the `podSubnet` field under the `networking` object of `ClusterConfiguration`.
{{< /note >}}
{{< note >}}
Some CNI network plugins like Calico require a CIDR such as `192.168.0.0/16` and
some like Weave do not. See the [CNI network documentation](/docs/setup/production-environment/tools/kubeadm/create-cluster-kubeadm/#pod-network).
To add a pod CIDR pass the flag `--pod-network-cidr`, or if you are using a kubeadm configuration file
set the `podSubnet` field under the `networking` object of `ClusterConfiguration`.
{{< /note >}}

After the command completes you should see something like so:
- The output looks similar to:

```sh
...
Expand All @@ -142,30 +142,30 @@ Then you can join any number of worker nodes by running the following on each as
kubeadm join 192.168.0.200:6443 --token 9vr73a.a8uxyaju799qwdjv --discovery-token-ca-cert-hash sha256:7c2e69131a36ae2a042a339b33381c6d0d43887e2de83720eff5359e26aec866
```

- Copy this output to a text file. You will need it later to join control plane and worker nodes to the cluster.
- When `--upload-certs` is used with `kubeadm init`, the certificates of the primary control plane
are encrypted and uploaded in the `kubeadm-certs` Secret.
- To re-upload the certificates and generate a new decryption key, use the following command on a control plane
node that is already joined to the cluster:
- Copy this output to a text file. You will need it later to join control plane and worker nodes to the cluster.
- When `--upload-certs` is used with `kubeadm init`, the certificates of the primary control plane
are encrypted and uploaded in the `kubeadm-certs` Secret.
- To re-upload the certificates and generate a new decryption key, use the following command on a control plane
node that is already joined to the cluster:

```sh
sudo kubeadm init phase upload-certs --upload-certs
```

- You can also specify a custom `--certificate-key` during `init` that can later be used by `join`.
To generate such a key you can use the following command:
- You can also specify a custom `--certificate-key` during `init` that can later be used by `join`.
To generate such a key you can use the following command:

```sh
kubeadm alpha certs certificate-key
```

{{< note >}}
The `kubeadm-certs` Secret and decryption key expire after two hours.
{{< /note >}}
{{< note >}}
The `kubeadm-certs` Secret and decryption key expire after two hours.
{{< /note >}}

{{< caution >}}
As stated in the command output, the certificate key gives access to cluster sensitive data, keep it secret!
{{< /caution >}}
{{< caution >}}
As stated in the command output, the certificate key gives access to cluster sensitive data, keep it secret!
{{< /caution >}}

1. Apply the CNI plugin of your choice:
[Follow these instructions](/docs/setup/production-environment/tools/kubeadm/create-cluster-kubeadm/#pod-network) to install the CNI provider. Make sure the configuration corresponds to the Pod CIDR specified in the kubeadm configuration file if applicable.
Expand Down Expand Up @@ -244,19 +244,19 @@ in the kubeadm config file.
certFile: /etc/kubernetes/pki/apiserver-etcd-client.crt
keyFile: /etc/kubernetes/pki/apiserver-etcd-client.key

{{< note >}}
The difference between stacked etcd and external etcd here is that the external etcd setup requires
a configuration file with the etcd endpoints under the `external` object for `etcd`.
In the case of the stacked etcd topology this is managed automatically.
{{< /note >}}
{{< note >}}
The difference between stacked etcd and external etcd here is that the external etcd setup requires
a configuration file with the etcd endpoints under the `external` object for `etcd`.
In the case of the stacked etcd topology this is managed automatically.
{{< /note >}}

- Replace the following variables in the config template with the appropriate values for your cluster:
- Replace the following variables in the config template with the appropriate values for your cluster:

- `LOAD_BALANCER_DNS`
- `LOAD_BALANCER_PORT`
- `ETCD_0_IP`
- `ETCD_1_IP`
- `ETCD_2_IP`
- `LOAD_BALANCER_DNS`
- `LOAD_BALANCER_PORT`
- `ETCD_0_IP`
- `ETCD_1_IP`
- `ETCD_2_IP`

The following steps are similar to the stacked etcd setup:

Expand Down Expand Up @@ -349,11 +349,11 @@ SSH is required if you want to control all nodes from a single machine.
done
```

{{< caution >}}
Copy only the certificates in the above list. kubeadm will take care of generating the rest of the certificates
with the required SANs for the joining control-plane instances. If you copy all the certificates by mistake,
the creation of additional nodes could fail due to a lack of required SANs.
{{< /caution >}}
{{< caution >}}
Copy only the certificates in the above list. kubeadm will take care of generating the rest of the certificates
with the required SANs for the joining control-plane instances. If you copy all the certificates by mistake,
the creation of additional nodes could fail due to a lack of required SANs.
{{< /caution >}}

1. Then on each joining control plane node you have to run the following script before running `kubeadm join`.
This script will move the previously copied certificates from the home directory to `/etc/kubernetes/pki`:
Expand Down

0 comments on commit 331cc6f

Please sign in to comment.